From: Wincy Van <fanwenyi0529@gmail.com>
To: pbonzini@redhat.com, gleb@kernel.org, yang.z.zhang@intel.com,
fanwenyi0529@gmail.com
Cc: wanpeng.li@linux.intel.com, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, jan.kiszka@web.de
Subject: [PATCH resend v5 4/6] KVM: nVMX: Enable nested apic register virtualization
Date: Tue, 3 Feb 2015 23:57:18 +0800 [thread overview]
Message-ID: <1422979038-2140-1-git-send-email-fanwenyi0529@gmail.com> (raw)
We can reduce apic register virtualization cost with this feature,
it is also a requirement for virtual interrupt delivery and posted
interrupt processing.
Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
---
arch/x86/kvm/vmx.c | 39 +++++++++++++++++++++++++++++++++++----
1 files changed, 35 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 40f7951..5d20518 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1142,6 +1142,11 @@ static inline bool nested_cpu_has_virt_x2apic_mode(struct vmcs12 *vmcs12)
return nested_cpu_has2(vmcs12, SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE);
}
+static inline bool nested_cpu_has_apic_reg_virt(struct vmcs12 *vmcs12)
+{
+ return nested_cpu_has2(vmcs12, SECONDARY_EXEC_APIC_REGISTER_VIRT);
+}
+
static inline bool is_exception(u32 intr_info)
{
return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
@@ -2435,6 +2440,7 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
vmx->nested.nested_vmx_secondary_ctls_high &=
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
+ SECONDARY_EXEC_APIC_REGISTER_VIRT |
SECONDARY_EXEC_WBINVD_EXITING |
SECONDARY_EXEC_XSAVES;
@@ -7447,6 +7453,9 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
case EXIT_REASON_APIC_ACCESS:
return nested_cpu_has2(vmcs12,
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
+ case EXIT_REASON_APIC_WRITE:
+ /* apic_write should exit unconditionally. */
+ return 1;
case EXIT_REASON_EPT_VIOLATION:
/*
* L0 always deals with the EPT violation. If nested EPT is
@@ -8606,6 +8615,7 @@ static int nested_vmx_check_msr_bitmap_controls(struct kvm_vcpu *vcpu,
static inline bool nested_vmx_merge_msr_bitmap(struct kvm_vcpu *vcpu,
struct vmcs12 *vmcs12)
{
+ int msr;
struct page *page;
unsigned long *msr_bitmap;
@@ -8625,16 +8635,35 @@ static inline bool nested_vmx_merge_msr_bitmap(struct kvm_vcpu *vcpu,
}
if (nested_cpu_has_virt_x2apic_mode(vmcs12)) {
+ if (nested_cpu_has_apic_reg_virt(vmcs12))
+ for (msr = 0x800; msr <= 0x8ff; msr++)
+ nested_vmx_disable_intercept_for_msr(
+ msr_bitmap,
+ vmx_msr_bitmap_nested,
+ msr, MSR_TYPE_R);
/* TPR is allowed */
nested_vmx_disable_intercept_for_msr(msr_bitmap,
vmx_msr_bitmap_nested,
APIC_BASE_MSR + (APIC_TASKPRI >> 4),
MSR_TYPE_R | MSR_TYPE_W);
- } else
+ } else {
+ /*
+ * Enable reading intercept of all the x2apic
+ * MSRs. We should not rely on vmcs12 to do any
+ * optimizations here, it may have been modified
+ * by L1.
+ */
+ for (msr = 0x800; msr <= 0x8ff; msr++)
+ __vmx_enable_intercept_for_msr(
+ vmx_msr_bitmap_nested,
+ msr,
+ MSR_TYPE_R);
+
__vmx_enable_intercept_for_msr(
vmx_msr_bitmap_nested,
APIC_BASE_MSR + (APIC_TASKPRI >> 4),
- MSR_TYPE_R | MSR_TYPE_W);
+ MSR_TYPE_W);
+ }
kunmap(page);
nested_release_page_clean(page);
@@ -8644,14 +8673,16 @@ static inline bool nested_vmx_merge_msr_bitmap(struct kvm_vcpu *vcpu,
static int nested_vmx_check_apicv_controls(struct kvm_vcpu *vcpu,
struct vmcs12 *vmcs12)
{
- if (!nested_cpu_has_virt_x2apic_mode(vmcs12))
+ if (!nested_cpu_has_virt_x2apic_mode(vmcs12) &&
+ !nested_cpu_has_apic_reg_virt(vmcs12))
return 0;
/*
* If virtualize x2apic mode is enabled,
* virtualize apic access must be disabled.
*/
- if (nested_cpu_has2(vmcs12, SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
+ if (nested_cpu_has_virt_x2apic_mode(vmcs12) &&
+ nested_cpu_has2(vmcs12, SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
return -EINVAL;
/* tpr shadow is needed by all apicv features. */
--
1.7.1
reply other threads:[~2015-02-03 15:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422979038-2140-1-git-send-email-fanwenyi0529@gmail.com \
--to=fanwenyi0529@gmail.com \
--cc=gleb@kernel.org \
--cc=jan.kiszka@web.de \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=wanpeng.li@linux.intel.com \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®