mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yakir Yang <ykk@rock-chips.com>
To: David Airlie <airlied@linux.ie>,
	Russell King <rmk+kernel@arm.linux.org.uk>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	Shawn Guo <shawn.guo@linaro.org>, Rob Clark <robdclark@gmail.com>,
	Mark Yao <mark.yao@rock-chips.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Arnd Bergmann <arnd@arndb.de>, Sean Cross <xobs@kosagi.com>,
	Jyri Sarha <jsarha@ti.com>, Ben Zhang <benzh@chromium.org>,
	alsa-devel@alsa-project.org, Heiko Stuebner <heiko@sntech.de>,
	linux-arm-kernel@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	devicetree@vger.kernel.org, djkurtz@chromium.org,
	mmind00@googlemail.com, dianders@chromium.org,
	marcheu@chromium.org, linux-rockchip@lists.infradead.org,
	Yakir Yang <ykk@rock-chips.com>
Subject: [RFC PATCH 3/3] drm: bridge/dw_hdmi: improve hdmi single-end test
Date: Tue, 10 Feb 2015 22:23:41 +0800	[thread overview]
Message-ID: <1423578221-19527-1-git-send-email-ykk@rock-chips.com> (raw)
In-Reply-To: <1423577791-19238-1-git-send-email-ykk@rock-chips.com>

Because of iMX6 & Rockchip have differnet mpll config parameter,
than the cklvl & txlvl would be different, we also should seperate
this parmeter.

As for Rockchip HDMI, when pixle clock less than 148MHz, the cklvl &
txlvl should be set to 13. When pixel clock less than 74.25MHz the
cklvl & txlvl should be set to 17.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---

 drivers/gpu/drm/bridge/dw_hdmi.c            |   14 +++++++-------
 drivers/gpu/drm/imx/dw_hdmi-imx.c           |   12 ++++++------
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c |   14 +++++++-------
 include/drm/bridge/dw_hdmi.h                |    5 +++--
 4 files changed, 23 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 8b3208c..869262d 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -764,7 +764,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
 	const struct dw_hdmi_plat_data *plat_data = hdmi->plat_data;
 	const struct dw_hdmi_mpll_config *mpll_config = plat_data->mpll_cfg;
 	const struct dw_hdmi_curr_ctrl *curr_ctrl = plat_data->cur_ctr;
-	const struct dw_hdmi_sym_term *sym_term =  plat_data->sym_term;
+	const struct dw_hdmi_phy_config *phy_config = plat_data->phy_config;
 
 	if (prep)
 		return -EINVAL;
@@ -835,18 +835,18 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
 	hdmi_phy_i2c_write(hdmi, 0x0000, 0x13);  /* PLLPHBYCTRL */
 	hdmi_phy_i2c_write(hdmi, 0x0006, 0x17);
 
-	for (i = 0; sym_term[i].mpixelclock != (~0UL); i++)
+	for (i = 0; phy_config[i].mpixelclock != (~0UL); i++)
 		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    sym_term[i].mpixelclock)
+		    phy_config[i].mpixelclock)
 			break;
 
 	/* RESISTANCE TERM 133Ohm Cfg */
-	hdmi_phy_i2c_write(hdmi, sym_term[i].term, 0x19);  /* TXTERM */
+	hdmi_phy_i2c_write(hdmi, phy_config[i].term, 0x19);  /* TXTERM */
 	/* PREEMP Cgf 0.00 */
-	hdmi_phy_i2c_write(hdmi, sym_term[i].sym_ctr, 0x09);  /* CKSYMTXCTRL */
-
+	hdmi_phy_i2c_write(hdmi, phy_config[i].sym_ctr, 0x09); /* CKSYMTXCTRL */
 	/* TX/CK LVL 10 */
-	hdmi_phy_i2c_write(hdmi, 0x01ad, 0x0E);  /* VLEVCTRL */
+	hdmi_phy_i2c_write(hdmi, phy_config[i].vlev_ctr, 0x0E); /* VLEVCTRL */
+
 	/* REMOVE CLK TERM */
 	hdmi_phy_i2c_write(hdmi, 0x8000, 0x05);  /* CKCALCTRL */
 
diff --git a/drivers/gpu/drm/imx/dw_hdmi-imx.c b/drivers/gpu/drm/imx/dw_hdmi-imx.c
index 121d30c..d6095d2 100644
--- a/drivers/gpu/drm/imx/dw_hdmi-imx.c
+++ b/drivers/gpu/drm/imx/dw_hdmi-imx.c
@@ -73,10 +73,10 @@ static const struct dw_hdmi_curr_ctrl imx_cur_ctr[] = {
 	}
 };
 
-static const struct dw_hdmi_sym_term imx_sym_term[] = {
-	/*pixelclk   symbol   term*/
-	{ 148500000, 0x800d, 0x0005 },
-	{ ~0UL,      0x0000, 0x0000 }
+static const struct dw_hdmi_phy_config imx_phy_config[] = {
+	/*pixelclk   symbol   term   vlev */
+	{ 148500000, 0x800d, 0x0005, 0x01ad},
+	{ ~0UL,      0x0000, 0x0000, 0x0000}
 };
 
 static int dw_hdmi_imx_parse_dt(struct imx_hdmi *hdmi)
@@ -139,14 +139,14 @@ static struct drm_encoder_funcs dw_hdmi_imx_encoder_funcs = {
 static struct dw_hdmi_plat_data imx6q_hdmi_drv_data = {
 	.mpll_cfg = imx_mpll_cfg,
 	.cur_ctr  = imx_cur_ctr,
-	.sym_term = imx_sym_term,
+	.phy_config = imx_phy_config,
 	.dev_type = IMX6Q_HDMI,
 };
 
 static struct dw_hdmi_plat_data imx6dl_hdmi_drv_data = {
 	.mpll_cfg = imx_mpll_cfg,
 	.cur_ctr  = imx_cur_ctr,
-	.sym_term = imx_sym_term,
+	.phy_config = imx_phy_config,
 	.dev_type = IMX6DL_HDMI,
 };
 
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 51030ca..65152a9 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -139,12 +139,12 @@ static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 	}
 };
 
-static const struct dw_hdmi_sym_term rockchip_sym_term[] = {
-	/*pixelclk   symbol   term*/
-	{ 74250000,  0x8009, 0x0004 },
-	{ 148500000, 0x803b, 0x0004 },
-	{ 297000000, 0x8039, 0x0005 },
-	{ ~0UL,	     0x0000, 0x0000 }
+static const struct dw_hdmi_phy_config rockchip_phy_config[] = {
+	/*pixelclk   symbol   term   vlev*/
+	{ 74250000,  0x8009, 0x0004, 0x0251},
+	{ 148500000, 0x803b, 0x0004, 0x01ad},
+	{ 297000000, 0x8039, 0x0005, 0x01ad},
+	{ ~0UL,	     0x0000, 0x0000, 0x0000}
 };
 
 static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
@@ -236,7 +236,7 @@ static const struct dw_hdmi_plat_data rockchip_hdmi_drv_data = {
 	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
-	.sym_term   = rockchip_sym_term,
+	.phy_config = rockchip_phy_config,
 	.dev_type   = RK3288_HDMI,
 };
 
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index b3f3b0d..1f14cc3 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -50,17 +50,18 @@ struct dw_hdmi_curr_ctrl {
 	u16 curr[DW_HDMI_RES_MAX];
 };
 
-struct dw_hdmi_sym_term {
+struct dw_hdmi_phy_config {
 	unsigned long mpixelclock;
 	u16 sym_ctr;    /*clock symbol and transmitter control*/
 	u16 term;       /*transmission termination value*/
+	u16 vlev_ctr;   /* voltage level control */
 };
 
 struct dw_hdmi_plat_data {
 	enum dw_hdmi_devtype dev_type;
 	const struct dw_hdmi_mpll_config *mpll_cfg;
 	const struct dw_hdmi_curr_ctrl *cur_ctr;
-	const struct dw_hdmi_sym_term *sym_term;
+	const struct dw_hdmi_phy_config *phy_config;
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
 };
-- 
1.7.9.5



      parent reply	other threads:[~2015-02-10 14:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-10 14:16 [RFC PATCH 0/3] Yakir Yang
2015-02-10 14:17 ` [RFC PATCH 1/3] drm: bridge/dw_hdmi: fixed codec style Yakir Yang
2015-02-10 14:18 ` [RFC PATCH 2/3] drm: bridge/dw_hdmi_rockchip: improve hdmi eye-diagram test Yakir Yang
2015-02-10 14:20 ` [RFC PATCH 0/1] Improve eye-diagram & single-ended test for rk3288 hdmi Yakir Yang
2015-02-10 14:23 ` Yakir Yang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1423578221-19527-1-git-send-email-ykk@rock-chips.com \
    --to=ykk@rock-chips.com \
    --cc=airlied@linux.ie \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=benzh@chromium.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabio.estevam@freescale.com \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jsarha@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=marcheu@chromium.org \
    --cc=mark.rutland@arm.com \
    --cc=mark.yao@rock-chips.com \
    --cc=mmind00@googlemail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pawel.moll@arm.com \
    --cc=rmk+kernel@arm.linux.org.uk \
    --cc=robdclark@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.guo@linaro.org \
    --cc=xobs@kosagi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®