From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753233AbbBTFyU (ORCPT ); Fri, 20 Feb 2015 00:54:20 -0500 Received: from mail-pa0-f44.google.com ([209.85.220.44]:34123 "EHLO mail-pa0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752785AbbBTFyS (ORCPT ); Fri, 20 Feb 2015 00:54:18 -0500 From: Tolga Ceylan To: Greg Kroah-Hartman , Roxana Blaj , Ana Rey , Rui Miguel Silva , Joe Perches , Chaitra Ramaiah , devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, tolga.ceylan@gmail.com Subject: [PATCH 3/4] Staging: rtl9182u: r819xU_firmware: Replaced C99 comments with C89 Date: Thu, 19 Feb 2015 21:54:10 -0800 Message-Id: <1424411651-15978-3-git-send-email-tolga.ceylan@gmail.com> X-Mailer: git-send-email 2.3.0 In-Reply-To: <1424411651-15978-1-git-send-email-tolga.ceylan@gmail.com> References: <1424411651-15978-1-git-send-email-tolga.ceylan@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Replaced C99 comments with C89. Signed-off-by: Tolga Ceylan --- drivers/staging/rtl8192u/r819xU_firmware.c | 33 +++++++++++++++--------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c index 6a818c4..e7b2f33 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.c +++ b/drivers/staging/rtl8192u/r819xU_firmware.c @@ -47,7 +47,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u8 index; firmware_init_param(dev); - //Fragmentation might be required + /* Fragmentation might be required */ frag_threshold = pfirmware->cmdpacket_frag_thresold; do { if ((buffer_len - frag_offset) > frag_threshold) { @@ -106,19 +106,20 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, } -//----------------------------------------------------------------------------- -// Procedure: Check whether main code is download OK. If OK, turn on CPU -// -// Description: CPU register locates in different page against general register. -// Switch to CPU register in the begin and switch back before return -// -// -// Arguments: The pointer of the adapter -// -// Returns: -// NDIS_STATUS_FAILURE - the following initialization process should be terminated -// NDIS_STATUS_SUCCESS - if firmware initialization process success -//----------------------------------------------------------------------------- +/* + * Procedure: Check whether main code is download OK. If OK, turn on CPU + * + * Description: CPU register locates in different page against general register. + * Switch to CPU register in the begin and switch back before return + * + * + * Arguments: The pointer of the adapter + * + * Returns: + * NDIS_STATUS_FAILURE - the following initialization process should + * be terminated + * NDIS_STATUS_SUCCESS - if firmware initialization process success + */ static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev) { bool rt_status = true; @@ -221,7 +222,7 @@ bool init_firmware(struct net_device *dev) /* it is called by reset */ rst_opt = OPT_SYSTEM_RESET; starting_state = FW_INIT_STEP0_BOOT; - // TODO: system reset + /* TODO: system reset */ } else if (pfirmware->firmware_status == FW_STATUS_5_READY) { /* it is called by Initialize */ @@ -290,7 +291,7 @@ bool init_firmware(struct net_device *dev) * will set polling bit when firmware code is also configured */ pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE; - //mdelay(1000); + /* mdelay(1000); */ /* * To initialize IMEM, CPU move code from 0x80000080, * hence, we send 0x80 byte packet -- 2.3.0