Re: [PATCH 2/2] iio: accel: kxcjk-1013: optimize i2c transfers in trigger handler

["Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1372 bytes --]

On Fri, 2015-02-20 at 16:23 +0100, Peter Meerwald wrote:
> > > > > +
> > > > > +		values[i] = data & 0xFF;
> > > > > +		values[i+1] = data >> 8;
> > > > 
> > > > this is incorrect; it forces the data to be little endian, however, the
> > > > endianness (as specified in the driver's .scan_type) is IIO_CPU -- the
> > > > code breaks for big-endian CPUs
> > > > 
> > > > since _read_i2c_block_data() can't do endianness conversion (and the chip
> > > > does i2c endianness, i.e. little-endian), the .scan_type should become
> > > > IIO_LE and above code is correct again but still ugly :)
> > > > 
> > > > bottom line: change .scan_type to IIO_LE
> > > > 
> > > Good point. Changing the endianess to IIO_LE is correct for either kxcjk1013_read_block_data or i2c_smbus_read_i2c_block_data.
> > > Will fix this in the next version. Thanks for catching this!
> > > 
> > I don't think changing to IIO_LE is good idea as when i2c_read_bock..
> > then the scan type will be CPU. So better to fix endianness in this
> > function.
> 
> the chip has little-endian data registers; i2c_read_block() just transfers 
> the data (no endianness conversion), so the data will still be 
> little-endian
You are right.
> 
> p.
> 

ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥