mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>,
	Nitin Gupta <ngupta@vflare.org>,
	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
	linux-kernel@vger.kernel.org,
	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: [PATCH 3/8] zram: factor out device reset from reset_store()
Date: Thu, 26 Feb 2015 23:10:38 +0900	[thread overview]
Message-ID: <1424959843-20409-4-git-send-email-sergey.senozhatsky@gmail.com> (raw)
In-Reply-To: <1424959843-20409-1-git-send-email-sergey.senozhatsky@gmail.com>

Device reset currently consists of two steps:
a) holding ->bd_mutex we ensure that there are no device users
(bdev->bd_openers)

b) and internal part (executed under bdev->bd_mutex and partially
under zram->init_lock) that resets the device - frees allocated
memory and returns the device back to its initial (un-init) state.

Dynamic device removal requires the same amount of work and checks.
We can reuse internal cleanup part (b) zram_reset_device(), but step (a)
is done in sysfs ATTR reset_store() handler.

Rename step (b) from zram_reset_device() to zram_reset_device_internal()
and factor out step (a) to zram_reset_device(). Both reset_store() and
dynamic device removal will use zram_reset_device().

For readability let's keep them separated.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---
 drivers/block/zram/zram_drv.c | 135 +++++++++++++++++++++---------------------
 1 file changed, 67 insertions(+), 68 deletions(-)

diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index d5e502b..92087da 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -729,48 +729,6 @@ static void zram_bio_discard(struct zram *zram, u32 index,
 	}
 }
 
-static void zram_reset_device(struct zram *zram)
-{
-	struct zram_meta *meta;
-	struct zcomp *comp;
-	u64 disksize;
-
-	down_write(&zram->init_lock);
-
-	zram->limit_pages = 0;
-
-	if (!init_done(zram)) {
-		up_write(&zram->init_lock);
-		return;
-	}
-
-	meta = zram->meta;
-	comp = zram->comp;
-	disksize = zram->disksize;
-	/*
-	 * Refcount will go down to 0 eventually and r/w handler
-	 * cannot handle further I/O so it will bail out by
-	 * check zram_meta_get.
-	 */
-	zram_meta_put(zram);
-	/*
-	 * We want to free zram_meta in process context to avoid
-	 * deadlock between reclaim path and any other locks.
-	 */
-	wait_event(zram->io_done, atomic_read(&zram->refcount) == 0);
-
-	/* Reset stats */
-	memset(&zram->stats, 0, sizeof(zram->stats));
-	zram->disksize = 0;
-	zram->max_comp_streams = 1;
-	set_capacity(zram->disk, 0);
-
-	up_write(&zram->init_lock);
-	/* I/O operation under all of CPU are done so let's free */
-	zram_meta_free(meta, disksize);
-	zcomp_destroy(comp);
-}
-
 static ssize_t disksize_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t len)
 {
@@ -829,16 +787,54 @@ out_free_meta:
 	return err;
 }
 
-static ssize_t reset_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t len)
+/* internal device reset part -- cleanup allocated memory and
+ * return back to initial state */
+static void zram_reset_device_internal(struct zram *zram)
 {
-	int ret;
-	unsigned short do_reset;
-	struct zram *zram;
-	struct block_device *bdev;
+	struct zram_meta *meta;
+	struct zcomp *comp;
+	u64 disksize;
 
-	zram = dev_to_zram(dev);
-	bdev = bdget_disk(zram->disk, 0);
+	down_write(&zram->init_lock);
+
+	zram->limit_pages = 0;
+
+	if (!init_done(zram)) {
+		up_write(&zram->init_lock);
+		return;
+	}
+
+	meta = zram->meta;
+	comp = zram->comp;
+	disksize = zram->disksize;
+	/*
+	 * Refcount will go down to 0 eventually and r/w handler
+	 * cannot handle further I/O so it will bail out by
+	 * check zram_meta_get.
+	 */
+	zram_meta_put(zram);
+	/*
+	 * We want to free zram_meta in process context to avoid
+	 * deadlock between reclaim path and any other locks.
+	 */
+	wait_event(zram->io_done, atomic_read(&zram->refcount) == 0);
+
+	/* Reset stats */
+	memset(&zram->stats, 0, sizeof(zram->stats));
+	zram->disksize = 0;
+	zram->max_comp_streams = 1;
+	set_capacity(zram->disk, 0);
+
+	up_write(&zram->init_lock);
+	/* I/O operation under all of CPU are done so let's free */
+	zram_meta_free(meta, disksize);
+	zcomp_destroy(comp);
+}
+
+static int zram_reset_device(struct zram *zram)
+{
+	int ret = 0;
+	struct block_device *bdev = bdget_disk(zram->disk, 0);
 
 	if (!bdev)
 		return -ENOMEM;
@@ -850,31 +846,34 @@ static ssize_t reset_store(struct device *dev,
 		goto out;
 	}
 
-	ret = kstrtou16(buf, 10, &do_reset);
-	if (ret)
-		goto out;
-
-	if (!do_reset) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	/* Make sure all pending I/O is finished */
 	fsync_bdev(bdev);
-	zram_reset_device(zram);
-
-	mutex_unlock(&bdev->bd_mutex);
-	revalidate_disk(zram->disk);
-	bdput(bdev);
-
-	return len;
-
+	zram_reset_device_internal(zram);
 out:
 	mutex_unlock(&bdev->bd_mutex);
 	bdput(bdev);
 	return ret;
 }
 
+static ssize_t reset_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	int ret;
+	unsigned short do_reset;
+	struct zram *zram;
+
+	zram = dev_to_zram(dev);
+	ret = kstrtou16(buf, 10, &do_reset);
+	if (ret)
+		return ret;
+
+	if (!do_reset)
+		return -EINVAL;
+
+	ret = zram_reset_device(zram);
+	return ret ? ret : len;
+}
+
 static void __zram_make_request(struct zram *zram, struct bio *bio)
 {
 	int offset, rw;
@@ -1167,7 +1166,7 @@ static void zram_remove(struct zram *zram)
 	sysfs_remove_group(&disk_to_dev(zram->disk)->kobj,
 			&zram_disk_attr_group);
 
-	zram_reset_device(zram);
+	zram_reset_device_internal(zram);
 	idr_remove(&zram_index_idr, zram->disk->first_minor);
 	blk_cleanup_queue(zram->disk->queue);
 	del_gendisk(zram->disk);
-- 
2.3.1.167.g7f4ba4b


  parent reply	other threads:[~2015-02-26 14:10 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26 14:10 [PATCH 0/8] introduce dynamic device creation/removal Sergey Senozhatsky
2015-02-26 14:10 ` [PATCH 1/8] zram: cosmetic ZRAM_ATTR_RO code formatting tweak Sergey Senozhatsky
2015-02-26 14:10 ` [PATCH 2/8] zram: use idr instead of `zram_devices' array Sergey Senozhatsky
2015-02-26 14:10 ` Sergey Senozhatsky [this message]
2015-02-26 14:10 ` [PATCH 4/8] zram: add dynamic device add/remove functionality Sergey Senozhatsky
2015-02-26 14:10 ` [PATCH 5/8] zram: return zram device_id value from zram_add() Sergey Senozhatsky
2015-02-26 14:10 ` [PATCH 6/8] zram: allow automatic new zram device_id assignment Sergey Senozhatsky
2015-02-26 14:10 ` [PATCH 7/8] zram: remove max_num_devices limitation Sergey Senozhatsky
2015-02-26 14:10 ` [PATCH 8/8] zram: report every added and removed device Sergey Senozhatsky
2015-02-27 22:51 ` [PATCH 0/8] introduce dynamic device creation/removal Andrew Morton
2015-02-28  1:33   ` Sergey Senozhatsky
2015-02-28  1:50     ` Sergey Senozhatsky
2015-02-28  3:34   ` Sergey Senozhatsky
2015-02-28  4:29     ` Andrew Morton
2015-03-02 14:18   ` Alan Cox
2015-03-03 12:49 [PATCHv3 " Sergey Senozhatsky
2015-03-03 12:49 ` [PATCH 3/8] zram: factor out device reset from reset_store() Sergey Senozhatsky
2015-03-05  2:28   ` Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424959843-20409-4-git-send-email-sergey.senozhatsky@gmail.com \
    --to=sergey.senozhatsky@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=jmarchan@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=minchan@kernel.org \
    --cc=ngupta@vflare.org \
    --cc=sergey.senozhatsky.work@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®