From: Yakir Yang <ykk@rock-chips.com>
To: djkurtz@chromium.org, dianders@chromium.org,
linux-rockchip@lists.infradead.org
Cc: David Airlie <airlied@linux.ie>,
Philipp Zabel <p.zabel@pengutronix.de>,
Russell King <rmk+kernel@arm.linux.org.uk>,
Yakir Yang <ykk@rock-chips.com>,
Andy Yan <andy.yan@rock-chips.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Fabio Estevam <fabio.estevam@freescale.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
mmind00@googlemail.com, marcheu@chromium.org,
mark.yao@rock-chips.com
Subject: [PATCH v4 11/15] drm: bridge/dw_hdmi: add enable/disable to dw_hdmi_audio callbacks
Date: Sat, 28 Feb 2015 21:52:25 -0500 [thread overview]
Message-ID: <1425178345-2380-1-git-send-email-ykk@rock-chips.com> (raw)
In-Reply-To: <1425175834-24661-1-git-send-email-ykk@rock-chips.com>
Add enable and disable callbacks to dw_hdmi_audio interface so that
dw_hdmi_audio can enable and disable the dw_hdmi audio.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v4:
- Rename "hdmi_audio_*" to "dw_hdmi_audio_*"
Changes in v3:
- Delete hdmi_audio_config interface and modify audio clock control functions
Changes in v2:
- Add audio config interfaces to dw_hdmi driver
drivers/gpu/drm/bridge/dw_hdmi.c | 62 ++++++++++++++++++++++++++++++++++++----
1 file changed, 56 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 16b8098..54185e2 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/hdmi.h>
+#include <linux/mutex.h>
#include <linux/of_device.h>
#include <drm/drm_of.h>
@@ -147,6 +148,11 @@ struct dw_hdmi {
void __iomem *regs;
unsigned int sample_rate;
+
+ /* this audio mutex works for audio clock control */
+ struct mutex audio_mutex;
+ bool audio_enable;
+
int ratio;
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
@@ -1245,6 +1251,53 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi)
hdmi->phy_enabled = false;
}
+static void dw_dw_hdmi_audio_clk_enable(struct dw_hdmi *hdmi)
+{
+ hdmi_modb(hdmi, 0, HDMI_MC_CLKDIS_AUDCLK_DISABLE, HDMI_MC_CLKDIS);
+}
+
+static void dw_dw_hdmi_audio_clk_disable(struct dw_hdmi *hdmi)
+{
+ hdmi_modb(hdmi, HDMI_MC_CLKDIS_AUDCLK_DISABLE,
+ HDMI_MC_CLKDIS_AUDCLK_DISABLE, HDMI_MC_CLKDIS);
+}
+
+static void dw_hdmi_audio_restore(struct dw_hdmi *hdmi)
+{
+ mutex_lock(&hdmi->audio_mutex);
+
+ if (hdmi->audio_enable)
+ dw_dw_hdmi_audio_clk_enable(hdmi);
+ else
+ dw_dw_hdmi_audio_clk_disable(hdmi);
+
+ mutex_unlock(&hdmi->audio_mutex);
+}
+
+static void dw_hdmi_audio_enable(struct dw_hdmi *hdmi)
+{
+ mutex_lock(&hdmi->audio_mutex);
+
+ if (!hdmi->audio_enable) {
+ hdmi->audio_enable = true;
+ dw_dw_hdmi_audio_clk_enable(hdmi);
+ }
+
+ mutex_unlock(&hdmi->audio_mutex);
+}
+
+static void dw_hdmi_audio_disable(struct dw_hdmi *hdmi)
+{
+ mutex_lock(&hdmi->audio_mutex);
+
+ if (hdmi->audio_enable) {
+ hdmi->audio_enable = false;
+ dw_dw_hdmi_audio_clk_disable(hdmi);
+ }
+
+ mutex_unlock(&hdmi->audio_mutex);
+}
+
/* HDMI Initialization Step B.4 */
static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi)
{
@@ -1275,11 +1328,6 @@ static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi)
}
}
-static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi)
-{
- hdmi_modb(hdmi, 0, HDMI_MC_CLKDIS_AUDCLK_DISABLE, HDMI_MC_CLKDIS);
-}
-
/* Workaround to clear the overflow condition */
static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
{
@@ -1375,7 +1423,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
/* HDMI Initialization Step E - Configure audio */
hdmi_clk_regenerator_update_pixel_clock(hdmi);
- hdmi_enable_audio_clk(hdmi);
+ dw_hdmi_audio_restore(hdmi);
/* HDMI Initialization Step F - Configure AVI InfoFrame */
hdmi_config_AVI(hdmi);
@@ -1770,6 +1818,8 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
hdmi->sample_rate = 48000;
hdmi->ratio = 100;
hdmi->encoder = encoder;
+ hdmi->audio_enable = false;
+ mutex_init(&hdmi->audio_mutex);
of_property_read_u32(np, "reg-io-width", &val);
--
2.1.2
next prev parent reply other threads:[~2015-03-01 2:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-01 2:10 [PATCH v4 0/15] Those patches is used for dw_hdmi audio support Yakir Yang
2015-03-01 2:18 ` [PATCH v4 01/15] drm: bridge/dw_hdmi: add irq control to suspend/resume Yakir Yang
2015-03-01 2:28 ` [PATCH v4 02/15] drm: bridge/dw_hdmi: wrap irq control in fucntions Yakir Yang
2015-03-12 10:24 ` Philipp Zabel
2015-03-12 14:31 ` yakir
2015-03-12 14:41 ` Philipp Zabel
2015-03-01 2:32 ` [PATCH v4 03/15] drm: rockchip/dw_hdmi_rockchip: add resume/suspend support Yakir Yang
2015-03-12 10:24 ` Philipp Zabel
2015-03-12 14:32 ` yakir
2015-03-01 2:35 ` [PATCH v4 04/15] drm: bridge/dw_hdmi: add identification registers parse and record Yakir Yang
2015-03-12 10:29 ` Philipp Zabel
2015-03-01 2:38 ` [PATCH v4 05/15] drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts() Yakir Yang
2015-03-01 2:40 ` [PATCH v4 06/15] drm: bridge/dw_hdmi: adjust n/cts setting order Yakir Yang
2015-03-01 2:43 ` [PATCH v4 07/15] drm: bridge/dw_hdmi: set ncts_atomic_write & cts_manual Yakir Yang
2015-03-01 2:45 ` [PATCH v4 08/15] drm: bridge/dw_hdmi: add audio support for more display resolutions Yakir Yang
2015-03-01 2:47 ` [PATCH v4 09/15] drm: bridge/dw_hdmi: enable audio support for No-CEA " Yakir Yang
2015-03-01 2:49 ` [PATCH v4 10/15] drm: bridge/dw_hdmi: add audio sample channel status setting Yakir Yang
2015-03-01 2:52 ` Yakir Yang [this message]
2015-03-01 2:57 ` [PATCH v4 12/15] drm: bridge/dw_hdmi: creat dw-hdmi-audio platform device Yakir Yang
2015-03-01 2:59 ` [PATCH v4 13/15] ASoC: codec/dw-hdmi-audio: add codec driver for dw hdmi audio Yakir Yang
2015-03-02 9:15 ` Paul Bolle
2015-03-02 11:31 ` Yakir Yang
2015-03-26 18:11 ` Mark Brown
2015-03-01 3:04 ` [PATCH v4 14/15] ASoC: rockchip/rockchip-hdmi-audio: add sound driver for " Yakir Yang
2015-03-02 9:07 ` Paul Bolle
2015-03-02 11:32 ` Yakir Yang
2015-03-26 18:16 ` Mark Brown
2015-03-27 1:16 ` yakir
2015-03-27 1:19 ` Mark Brown
2015-03-01 3:07 ` [PATCH v4 15/15] dt-bindings: Add documentation for Rockchip dw-hdmi-audio Yakir Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425178345-2380-1-git-send-email-ykk@rock-chips.com \
--to=ykk@rock-chips.com \
--cc=airlied@linux.ie \
--cc=andy.yan@rock-chips.com \
--cc=dianders@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@freescale.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=marcheu@chromium.org \
--cc=mark.yao@rock-chips.com \
--cc=mmind00@googlemail.com \
--cc=p.zabel@pengutronix.de \
--cc=rmk+kernel@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®