mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wang Nan <wangnan0@huawei.com>
To: <rostedt@goodmis.org>, <masami.hiramatsu.pt@hitachi.com>,
	<mingo@elte.hu>, <linux@arm.linux.org.uk>, <tixy@linaro.org>
Cc: <lizefan@huawei.com>, <linux-kernel@vger.kernel.org>,
	<x86@kernel.org>, <linux-arm-kernel@lists.infradead.org>
Subject: [RFC PATCH v4 21/34] ftrace: sort ftrace entries earlier.
Date: Mon, 2 Mar 2015 22:24:59 +0800	[thread overview]
Message-ID: <1425306312-3437-22-git-send-email-wangnan0@huawei.com> (raw)
In-Reply-To: <1425306312-3437-1-git-send-email-wangnan0@huawei.com>

By extracting mcount sorting code and sort them earliler, futher patches
will be able to determine whether an address is on an ftrace entry or
not using bsearch().

ftrace_sort_mcount_area() will be called before, during and after
ftrace_init (when module insertion). Ensure it sort kernel mcount table
only once.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
---
 include/linux/ftrace.h |  2 ++
 init/main.c            |  1 +
 kernel/trace/ftrace.c  | 38 ++++++++++++++++++++++++++++++++++++--
 3 files changed, 39 insertions(+), 2 deletions(-)

diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 1da6029..8db315a 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -701,8 +701,10 @@ static inline void __ftrace_enabled_restore(int enabled)
 
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
 extern void ftrace_init(void);
+extern void ftrace_init_early(void);
 #else
 static inline void ftrace_init(void) { }
+static inline void ftrace_init_early(void) { }
 #endif
 
 /*
diff --git a/init/main.c b/init/main.c
index 679d49e..6d269ac 100644
--- a/init/main.c
+++ b/init/main.c
@@ -518,6 +518,7 @@ asmlinkage __visible void __init start_kernel(void)
 	boot_cpu_init();
 	page_address_init();
 	pr_notice("%s", linux_banner);
+	ftrace_init_early();
 	setup_arch(&command_line);
 	init_kprobes_early();
 	mm_init_cpumask(&init_mm);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 6c6cbb1..fa3cdd3 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -112,6 +112,7 @@ ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub;
 static struct ftrace_ops global_ops;
 static struct ftrace_ops control_ops;
+static bool kernel_mcount_sorted = false;
 
 static void ftrace_ops_recurs_func(unsigned long ip, unsigned long parent_ip,
 				   struct ftrace_ops *op, struct pt_regs *regs);
@@ -4743,6 +4744,32 @@ static void ftrace_swap_ips(void *a, void *b, int size)
 	*ipb = t;
 }
 
+static void ftrace_sort_mcount_area(unsigned long *start, unsigned long *end)
+{
+	extern unsigned long __start_mcount_loc[];
+	extern unsigned long __stop_mcount_loc[];
+
+	unsigned long count;
+	bool is_kernel_mcount;
+
+	count = end - start;
+	if (!count)
+		return;
+
+	is_kernel_mcount =
+		(start == __start_mcount_loc) &&
+		(end == __stop_mcount_loc);
+
+	if (is_kernel_mcount && kernel_mcount_sorted)
+		return;
+
+	sort(start, count, sizeof(*start),
+		ftrace_cmp_ips, ftrace_swap_ips);
+
+	if (is_kernel_mcount)
+		kernel_mcount_sorted = true;
+}
+
 static int ftrace_process_locs(struct module *mod,
 			       unsigned long *start,
 			       unsigned long *end)
@@ -4761,8 +4788,7 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, ftrace_swap_ips);
+	ftrace_sort_mcount_area(start, end);
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
@@ -4965,6 +4991,14 @@ void __init ftrace_init(void)
 	ftrace_disabled = 1;
 }
 
+void __init ftrace_init_early(void)
+{
+	extern unsigned long __start_mcount_loc[];
+	extern unsigned long __stop_mcount_loc[];
+
+	ftrace_sort_mcount_area(__start_mcount_loc, __stop_mcount_loc);
+}
+
 /* Do nothing if arch does not support this */
 void __weak arch_ftrace_update_trampoline(struct ftrace_ops *ops)
 {
-- 
1.8.4


  parent reply	other threads:[~2015-03-02 14:27 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-02 14:24 [RFC PATCH v4 00/34] Early kprobe: enable kprobes at very early booting stage Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 01/34] x86, traps: Enable DEBUG_STACK after cpu_init() for TRAP_DB/BP Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 02/34] x86, traps: separate set_intr_gate() and cleanup early_trap_init() Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 03/34] x86, traps: install gates using IST after cpu_init() Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 04/34] early kprobes: within_kprobe_blacklist_early() early Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 05/34] early kprobes: introduce kprobe_is_early for futher early kprobe use Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 06/34] early kprobes: enable kprobe smoke test for early kprobes Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 07/34] early kprobes: init kprobes at very early stage Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 08/34] early kprobes: ARM: add definition for vmlinux.lds use Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 09/34] early kprobes: x86: " Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 10/34] early kprobes: introduce early kprobes related code area Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 11/34] early kprobes: introduces macros for allocing early kprobe resources Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 12/34] early kprobes: allows __alloc_insn_slot() from early kprobes slots Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 13/34] early kprobes: alloc optimized kprobe before memory system is ready Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 14/34] early kprobes: use stop_machine() based x86 optimizer Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 15/34] early kprobes: use stop_machine() based optimization method for early kprobes Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 16/34] early kprobes: perhibit probing at early kprobe reserved area Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 17/34] early kprobes: run kprobes smoke test for early kprobes Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 18/34] early kprobes: add CONFIG_EARLY_KPROBES option Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 19/34] ftrace: don't update record flags if code modification fail Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 20/34] ftrace/x86: Ensure rec->flags no change when failure occures Wang Nan
2015-03-02 14:24 ` Wang Nan [this message]
2015-03-02 14:25 ` [RFC PATCH v4 22/34] ftrace: allow search ftrace addr before ftrace fully inited Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 23/34] ftrace: notify kprobe when ftrace is initialized Wang Nan
2015-03-03 16:29   ` Petr Mladek
2015-03-02 14:25 ` [RFC PATCH v4 24/34] early kprobes on ftrace: introduce x86 arch_fix_ftrace_early_kprobe() Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 25/34] ftrace: don't fire ftrace_bug if the instruction is taken by early kprobes Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 26/34] early kprobes on ftrace: x86: arch code for retrieving kprobed instruction Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 27/34] early kprobes on ftrace: kprobe_on_ftrace_get_old_insn() Wang Nan
2015-03-04  2:30   ` Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 28/34] ftrace: x86: get old instruction from early kprobes when make call Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 29/34] ftrace: x86: call kprobe_int3_handler() in ftrace int3 handler Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 30/34] early kprobes: convert early kprobes on ftrace to ftrace Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 31/34] early kprobes: enable early kprobes for x86 Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 32/34] early kprobes: enable 'ekprobe=' cmdline option for early kprobes Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 33/34] ftrace: enable make ftrace nop before ftrace_init() Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 34/34] early kprobes: enable optimization of kprobes on ftrace before ftrace is ready Wang Nan
2015-03-03  5:09 ` [PATCH 0/3] early kprobes: Fix bug in unregistering early kprobe before kprobe " Wang Nan
2015-03-03  5:09   ` [PATCH 1/3] early kprobes: make kprobes_on_ftrace_initialized public available Wang Nan
2015-03-03  5:09   ` [PATCH 2/3] ftrace/x86: don't return error if other makes a same code change Wang Nan
2015-03-03  5:09   ` [PATCH 3/3] early kprobes: x86: don't try to recover ftraced instruction before ftrace get ready Wang Nan
2015-03-03 17:06     ` Petr Mladek
2015-03-04  2:24       ` Wang Nan
2015-03-04  3:36         ` Masami Hiramatsu
2015-03-04  4:39           ` Wang Nan
2015-03-04  5:59             ` Masami Hiramatsu
2015-03-04 11:22               ` Wang Nan
2015-03-04 15:26                 ` Masami Hiramatsu
2015-03-05  1:53                   ` Wang Nan
2015-03-05  2:06                     ` Wang Nan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425306312-3437-22-git-send-email-wangnan0@huawei.com \
    --to=wangnan0@huawei.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=lizefan@huawei.com \
    --cc=masami.hiramatsu.pt@hitachi.com \
    --cc=mingo@elte.hu \
    --cc=rostedt@goodmis.org \
    --cc=tixy@linaro.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®