From: Songjun Wu <songjun.wu@atmel.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>,
<tiwai@suse.de>, <ckeepax@opensource.wolfsonmicro.com>,
<lars@metafoo.de>, <fabio.estevam@freescale.com>,
<manuel.lauss@gmail.com>, <patches@opensource.wolfsonmicro.com>,
<alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<voice.shen@atmel.com>
Cc: Songjun Wu <songjun.wu@atmel.com>
Subject: [RFC PATCH] ASoC: wm8731: let codec to manage clock by itself
Date: Thu, 12 Mar 2015 10:17:11 +0800 [thread overview]
Message-ID: <1426126631-27240-1-git-send-email-songjun.wu@atmel.com> (raw)
Enable WM8731 to support common clock framework.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
---
sound/soc/codecs/wm8731.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 098c143..8df1550 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -25,6 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/of_device.h>
#include <linux/mutex.h>
+#include <linux/clk.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -45,6 +46,7 @@ static const char *wm8731_supply_names[WM8731_NUM_SUPPLIES] = {
/* codec private data */
struct wm8731_priv {
struct regmap *regmap;
+ struct clk *mclk;
struct regulator_bulk_data supplies[WM8731_NUM_SUPPLIES];
const struct snd_pcm_hw_constraint_list *constraints;
unsigned int sysclk;
@@ -390,6 +392,8 @@ static int wm8731_set_dai_sysclk(struct snd_soc_dai *codec_dai,
switch (clk_id) {
case WM8731_SYSCLK_XTAL:
case WM8731_SYSCLK_MCLK:
+ if (wm8731->mclk && clk_set_rate(wm8731->mclk, freq))
+ return -EINVAL;
wm8731->sysclk_type = clk_id;
break;
default:
@@ -491,6 +495,8 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec,
switch (level) {
case SND_SOC_BIAS_ON:
+ if (wm8731->mclk)
+ clk_prepare_enable(wm8731->mclk);
break;
case SND_SOC_BIAS_PREPARE:
break;
@@ -509,6 +515,8 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec,
snd_soc_write(codec, WM8731_PWR, reg | 0x0040);
break;
case SND_SOC_BIAS_OFF:
+ if (wm8731->mclk)
+ clk_disable_unprepare(wm8731->mclk);
snd_soc_write(codec, WM8731_PWR, 0xffff);
regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies),
wm8731->supplies);
@@ -667,6 +675,19 @@ static int wm8731_spi_probe(struct spi_device *spi)
if (wm8731 == NULL)
return -ENOMEM;
+ wm8731->mclk = devm_clk_get(&spi->dev, "mclk");
+ if (IS_ERR(wm8731->mclk)) {
+ ret = PTR_ERR(wm8731->mclk);
+ if (ret == -ENOENT) {
+ wm8731->mclk = NULL;
+ dev_warn(&spi->dev, "Assuming static MCLK\n");
+ } else {
+ dev_err(&spi->dev, "Failed to get MCLK: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
mutex_init(&wm8731->lock);
wm8731->regmap = devm_regmap_init_spi(spi, &wm8731_regmap);
@@ -718,6 +739,19 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
if (wm8731 == NULL)
return -ENOMEM;
+ wm8731->mclk = devm_clk_get(&i2c->dev, "mclk");
+ if (IS_ERR(wm8731->mclk)) {
+ ret = PTR_ERR(wm8731->mclk);
+ if (ret == -ENOENT) {
+ wm8731->mclk = NULL;
+ dev_warn(&i2c->dev, "Assuming static MCLK\n");
+ } else {
+ dev_err(&i2c->dev, "Failed to get MCLK: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
mutex_init(&wm8731->lock);
wm8731->regmap = devm_regmap_init_i2c(i2c, &wm8731_regmap);
--
1.7.9.5
next reply other threads:[~2015-03-12 2:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-12 2:17 Songjun Wu [this message]
2015-03-16 14:53 ` Charles Keepax
2015-03-16 15:01 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2015-02-03 3:33 Bo Shen
2015-02-03 7:54 ` Manuel Lauss
2015-02-03 12:44 ` Mark Brown
2015-02-03 14:40 ` Manuel Lauss
2015-02-03 16:21 ` Mark Brown
2015-02-04 3:45 ` Bo Shen
2015-02-04 11:13 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426126631-27240-1-git-send-email-songjun.wu@atmel.com \
--to=songjun.wu@atmel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=fabio.estevam@freescale.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manuel.lauss@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®