mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Toshi Kani <toshi.kani@hp.com>
To: akpm@linux-foundation.org, hpa@zytor.com, tglx@linutronix.de,
	mingo@redhat.com
Cc: linux-mm@kvack.org, x86@kernel.org, linux-kernel@vger.kernel.org,
	dave.hansen@intel.com, Elliott@hp.com, pebolle@tiscali.nl,
	Toshi Kani <toshi.kani@hp.com>
Subject: [PATCH v3 5/5] mtrr, mm, x86: Enhance MTRR checks for KVA huge page mapping
Date: Fri, 13 Mar 2015 15:33:41 -0600	[thread overview]
Message-ID: <1426282421-25385-6-git-send-email-toshi.kani@hp.com> (raw)
In-Reply-To: <1426282421-25385-1-git-send-email-toshi.kani@hp.com>

This patch adds an additional argument, 'uniform', to
mtrr_type_lookup(), which returns 1 when a given range is
covered uniformly by MTRRs, i.e. the range is fully covered
by a single MTRR entry or the default type.

pud_set_huge() and pmd_set_huge() are changed to check the
new 'uniform' flag to see if it is safe to create a huge page
mapping to the range.  This allows them to create a huge page
mapping to a range covered by a single MTRR entry of any
memory type.  It also detects a non-optimal request properly.
They continue to check with the WB type since the WB type has
no effect even if a request spans multiple MTRR entries.

pmd_set_huge() logs a warning message to a non-optimal request
so that driver writers will be aware of such a case.  Drivers
should make a mapping request aligned to a single MTRR entry
when the range is covered by MTRRs.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
---
 arch/x86/include/asm/mtrr.h        |    5 +++--
 arch/x86/kernel/cpu/mtrr/generic.c |   35 +++++++++++++++++++++++++++--------
 arch/x86/mm/pat.c                  |    4 ++--
 arch/x86/mm/pgtable.c              |   25 +++++++++++++++----------
 4 files changed, 47 insertions(+), 22 deletions(-)

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index f768f62..5b4d467 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -31,7 +31,7 @@
  * arch_phys_wc_add and arch_phys_wc_del.
  */
 # ifdef CONFIG_MTRR
-extern u8 mtrr_type_lookup(u64 addr, u64 end);
+extern u8 mtrr_type_lookup(u64 addr, u64 end, u8 *uniform);
 extern void mtrr_save_fixed_ranges(void *);
 extern void mtrr_save_state(void);
 extern int mtrr_add(unsigned long base, unsigned long size,
@@ -50,11 +50,12 @@ extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
 extern int amd_special_default_mtrr(void);
 extern int phys_wc_to_mtrr_index(int handle);
 #  else
-static inline u8 mtrr_type_lookup(u64 addr, u64 end)
+static inline u8 mtrr_type_lookup(u64 addr, u64 end, u8 *uniform)
 {
 	/*
 	 * Return no-MTRRs:
 	 */
+	*uniform = 1;
 	return 0xff;
 }
 #define mtrr_save_fixed_ranges(arg) do {} while (0)
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 271b19c..6d6a540 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -143,19 +143,22 @@ static u8 mtrr_type_lookup_fixed(u64 start, u64 end)
  * Return Value:
  * memory type - Matched memory type or the default memory type (unmatched)
  *
- * Output Argument:
+ * Output Arguments:
  * repeat - Set to 1 when [start:end] spanned across MTRR range and type
  *	    returned corresponds only to [start:*partial_end].  Caller has
  *	    to lookup again for [*partial_end:end].
+ * uniform - Set to 1 when MTRR covers the region uniformly, i.e. the region
+ *	     is fully covered by a single MTRR entry or the default type.
  */
 static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
-				    int *repeat)
+				    int *repeat, u8 *uniform)
 {
 	int i;
 	u64 base, mask;
 	u8 prev_match, curr_match;
 
 	*repeat = 0;
+	*uniform = 1;
 
 	/* Make end inclusive end, instead of exclusive */
 	end--;
@@ -203,6 +206,7 @@ static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
 
 			end = *partial_end - 1; /* end is inclusive */
 			*repeat = 1;
+			*uniform = 0;
 		}
 
 		if (!start_state)
@@ -214,6 +218,7 @@ static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
 			continue;
 		}
 
+		*uniform = 0;
 		if (check_type_overlap(&prev_match, &curr_match))
 			return curr_match;
 	}
@@ -230,13 +235,19 @@ static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
  * Return Values:
  * memory type - The effective MTRR type for the region
  * 0xFF - MTRR is disabled
+ *
+ * Output Argument:
+ * uniform - Set to 1 when MTRR covers the region uniformly, i.e. the region
+ *	     is fully covered by a single MTRR entry or the default type.
  */
-u8 mtrr_type_lookup(u64 start, u64 end)
+u8 mtrr_type_lookup(u64 start, u64 end, u8 *uniform)
 {
-	u8 type, prev_type;
+	u8 type, prev_type, is_uniform, dummy;
 	int repeat;
 	u64 partial_end;
 
+	*uniform = 1;
+
 	if (!mtrr_state_set)
 		return 0xFF;
 
@@ -248,14 +259,17 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 	 * the variable ranges.
 	 */
 	type = mtrr_type_lookup_fixed(start, end);
-	if (type != 0xFF)
+	if (type != 0xFF) {
+		*uniform = 0;
 		return type;
+	}
 
 	/*
 	 * Look up the variable ranges.  Look of multiple ranges matching
 	 * this address and pick type as per MTRR precedence.
 	 */
-	type = mtrr_type_lookup_variable(start, end, &partial_end, &repeat);
+	type = mtrr_type_lookup_variable(start, end, &partial_end,
+					 &repeat, &is_uniform);
 
 	/*
 	 * Common path is with repeat = 0.
@@ -266,16 +280,21 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 	while (repeat) {
 		prev_type = type;
 		start = partial_end;
+		is_uniform = 0;
+
 		type = mtrr_type_lookup_variable(start, end, &partial_end,
-						 &repeat);
+						 &repeat, &dummy);
 
-		if (check_type_overlap(&prev_type, &type))
+		if (check_type_overlap(&prev_type, &type)) {
+			*uniform = 0;
 			return type;
+		}
 	}
 
 	if (mtrr_tom2 && (start >= (1ULL<<32)) && (end < mtrr_tom2))
 		return MTRR_TYPE_WRBACK;
 
+	*uniform = is_uniform;
 	return type;
 }
 
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 35af677..372ad42 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -267,9 +267,9 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end,
 	 * request is for WB.
 	 */
 	if (req_type == _PAGE_CACHE_MODE_WB) {
-		u8 mtrr_type;
+		u8 mtrr_type, uniform;
 
-		mtrr_type = mtrr_type_lookup(start, end);
+		mtrr_type = mtrr_type_lookup(start, end, &uniform);
 		if (mtrr_type != MTRR_TYPE_WRBACK)
 			return _PAGE_CACHE_MODE_UC_MINUS;
 
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 4891fa1..3d6edea 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -567,17 +567,18 @@ void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
  * pud_set_huge - setup kernel PUD mapping
  *
  * MTRR can override PAT memory types with 4KB granularity.  Therefore,
- * it does not set up a huge page when the range is covered by a non-WB
- * type of MTRR.  0xFF indicates that MTRR are disabled.
+ * it only sets up a huge page when the range is mapped uniformly by MTRR
+ * (i.e. the range is fully covered by a single MTRR entry or the default
+ * type) or the MTRR memory type is WB.
  *
  * Return 1 on success, and 0 when no PUD was set.
  */
 int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
 {
-	u8 mtrr;
+	u8 mtrr, uniform;
 
-	mtrr = mtrr_type_lookup(addr, addr + PUD_SIZE);
-	if ((mtrr != MTRR_TYPE_WRBACK) && (mtrr != 0xFF))
+	mtrr = mtrr_type_lookup(addr, addr + PUD_SIZE, &uniform);
+	if ((!uniform) && (mtrr != MTRR_TYPE_WRBACK))
 		return 0;
 
 	prot = pgprot_4k_2_large(prot);
@@ -593,18 +594,22 @@ int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
  * pmd_set_huge - setup kernel PMD mapping
  *
  * MTRR can override PAT memory types with 4KB granularity.  Therefore,
- * it does not set up a huge page when the range is covered by a non-WB
- * type of MTRR.  0xFF indicates that MTRR are disabled.
+ * it only sets up a huge page when the range is mapped uniformly by MTRR
+ * (i.e. the range is fully covered by a single MTRR entry or the default
+ * type) or the MTRR memory type is WB.
  *
  * Return 1 on success, and 0 when no PMD was set.
  */
 int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
 {
-	u8 mtrr;
+	u8 mtrr, uniform;
 
-	mtrr = mtrr_type_lookup(addr, addr + PMD_SIZE);
-	if ((mtrr != MTRR_TYPE_WRBACK) && (mtrr != 0xFF))
+	mtrr = mtrr_type_lookup(addr, addr + PMD_SIZE, &uniform);
+	if ((!uniform) && (mtrr != MTRR_TYPE_WRBACK)) {
+		pr_warn("pmd_set_huge: requesting [mem %#010llx-%#010llx], which spans more than a single MTRR entry\n",
+				addr, addr + PMD_SIZE);
 		return 0;
+	}
 
 	prot = pgprot_4k_2_large(prot);
 

      parent reply	other threads:[~2015-03-13 21:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-13 21:33 [PATCH v3 0/5] mtrr, mm, x86: Enhance MTRR checks for huge I/O mapping Toshi Kani
2015-03-13 21:33 ` [PATCH v3 1/5] mm, x86: Document return values of mapping funcs Toshi Kani
2015-03-13 21:33 ` [PATCH v3 2/5] mtrr, x86: Fix MTRR lookup to handle inclusive entry Toshi Kani
2015-03-16  7:49   ` Ingo Molnar
2015-03-16 21:03     ` Kani, Toshimitsu
2015-03-13 21:33 ` [PATCH v3 3/5] mtrr, x86: Fix MTRR state checks in mtrr_type_lookup() Toshi Kani
2015-03-16  7:51   ` Ingo Molnar
2015-03-16 21:08     ` Kani, Toshimitsu
2015-03-13 21:33 ` [PATCH v3 4/5] mtrr, x86: Clean up mtrr_type_lookup() Toshi Kani
2015-03-16  7:58   ` Ingo Molnar
2015-03-16 21:24     ` Kani, Toshimitsu
2015-03-23 19:27       ` Toshi Kani
2015-03-13 21:33 ` Toshi Kani [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426282421-25385-6-git-send-email-toshi.kani@hp.com \
    --to=toshi.kani@hp.com \
    --cc=Elliott@hp.com \
    --cc=akpm@linux-foundation.org \
    --cc=dave.hansen@intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mingo@redhat.com \
    --cc=pebolle@tiscali.nl \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®