From: "Andreas Färber" <afaerber@suse.de>
To: linux-samsung-soc@vger.kernel.org
Cc: "Kukjin Kim" <kgene@kernel.org>, 김학주 <ruppi.kim@hardkernel.com>,
"Tomasz Figa" <tomasz.figa@gmail.com>,
"Humberto Naves" <hsnaves@gmail.com>,
"Jan Kiszka" <jan.kiszka@siemens.com>,
"Johann Pfefferl" <johann.pfefferl@siemens.com>,
"Ben Gamari" <bgamari.foss@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Andreas Färber" <afaerber@suse.de>
Subject: [PATCH v4 2/5] ARM: dts: Prepare exynos5410-odroidxu device tree
Date: Sun, 15 Mar 2015 23:00:31 +0100 [thread overview]
Message-ID: <1426456834-6308-3-git-send-email-afaerber@suse.de> (raw)
In-Reply-To: <1426456834-6308-1-git-send-email-afaerber@suse.de>
Derived from exynos5410-smdk5410.dts.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2 -> v3: Unchanged
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5410-odroidxu.dts | 78 +++++++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b8dcec..b040737edcbc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -103,6 +103,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5250-snow.dtb \
exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
+ exynos5410-odroidxu.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..97310bb727e2
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,78 @@
+/*
+ * Hardkernel ODROID-XU device tree source
+ *
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Based on exynos5410-smdk5410.dts:
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+ model = "ODROID-XU based on EXYNOS5410";
+ compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ fin_pll: xxti {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ firmware@02037000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02037000 0x1000>;
+ };
+
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ cap-mmc-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ bus-width = <8>;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ bus-width = <4>;
+ disable-wp;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--
2.3.1
next prev parent reply other threads:[~2015-03-15 22:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-15 22:00 [PATCH v4 0/5] ARM: EXYNOS: ODROID-XU DT and LEDs Andreas Färber
2015-03-15 22:00 ` [PATCH v4 1/5] ARM: dts: Clean up exynos5410-smdk5410 indentation Andreas Färber
2015-03-16 7:24 ` Javier Martinez Canillas
2015-06-02 12:58 ` Krzysztof Kozlowski
2015-03-15 22:00 ` Andreas Färber [this message]
2015-03-16 7:56 ` [PATCH v4 2/5] ARM: dts: Prepare exynos5410-odroidxu device tree Javier Martinez Canillas
2015-03-16 10:27 ` Andreas Färber
2015-03-16 10:58 ` Javier Martinez Canillas
2015-03-17 2:10 ` Kukjin Kim
2015-06-02 12:43 ` Krzysztof Kozlowski
2015-03-15 22:00 ` [PATCH v4 3/5] pinctrl: exynos: add exynos5410 SoC specific data Andreas Färber
2015-03-23 17:22 ` Tomasz Figa
2015-06-02 12:46 ` Krzysztof Kozlowski
2015-03-15 22:00 ` [PATCH v4 4/5] ARM: dts: add pinctrl support to Exynos5410 Andreas Färber
2015-06-02 12:59 ` Krzysztof Kozlowski
2015-03-15 22:00 ` [PATCH v4 5/5] ARM: dts: Add LEDs to exynos5410-odroidxu Andreas Färber
2015-03-16 8:02 ` Javier Martinez Canillas
2015-06-02 13:02 ` Krzysztof Kozlowski
2015-06-02 13:38 ` Andreas Färber
2015-06-02 23:55 ` Krzysztof Kozlowski
2015-03-31 19:48 ` [PATCH v4 0/5] ARM: EXYNOS: ODROID-XU DT and LEDs Ben Gamari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426456834-6308-3-git-send-email-afaerber@suse.de \
--to=afaerber@suse.de \
--cc=bgamari.foss@gmail.com \
--cc=hsnaves@gmail.com \
--cc=jan.kiszka@siemens.com \
--cc=johann.pfefferl@siemens.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=ruppi.kim@hardkernel.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®