mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Abhijeet Dharmapurikar <adharmap@codeaurora.org>,
	Stephen Boyd <sboyd@codeaurora.org>, Phong Vo <pvo@apm.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Tin Huynh <tnhuynh@apm.com>, Y Vo <yvo@apm.com>,
	Thomas Gleixner <tglx@linutronix.de>, Toan Le <toanle@apm.com>,
	Bjorn Andersson <bjorn@kryo.se>,
	Jason Cooper <jason@lakedaemon.net>,
	Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/3] irqchip: GICv3: Add support for irq_{get,set}_irqchip_state
Date: Wed, 18 Mar 2015 11:01:24 +0000	[thread overview]
Message-ID: <1426676484-21812-4-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1426676484-21812-1-git-send-email-marc.zyngier@arm.com>

Add the required hooks for the internal state of an interrupt
to be exposed to other subsystems.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 drivers/irqchip/irq-gic-v3.c | 83 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 70 insertions(+), 13 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index fd8850d..4f2fb62 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -195,6 +195,19 @@ static void gic_enable_redist(bool enable)
 /*
  * Routines to disable, enable, EOI and route interrupts
  */
+static int gic_peek_irq(struct irq_data *d, u32 offset)
+{
+	u32 mask = 1 << (gic_irq(d) % 32);
+	void __iomem *base;
+
+	if (gic_irq_in_rdist(d))
+		base = gic_data_rdist_sgi_base();
+	else
+		base = gic_data.dist_base;
+
+	return !!(readl_relaxed(base + offset + (gic_irq(d) / 32) * 4) & mask);
+}
+
 static void gic_poke_irq(struct irq_data *d, u32 offset)
 {
 	u32 mask = 1 << (gic_irq(d) % 32);
@@ -223,6 +236,61 @@ static void gic_unmask_irq(struct irq_data *d)
 	gic_poke_irq(d, GICD_ISENABLER);
 }
 
+static int gic_irq_set_irqchip_state(struct irq_data *d,
+				     enum irqchip_irq_state which, bool val)
+{
+	u32 reg;
+
+	if (d->hwirq >= gic_data.irq_nr) /* PPI/SPI only */
+		return -EINVAL;
+
+	switch (which) {
+	case IRQCHIP_STATE_PENDING:
+		reg = val ? GICD_ISPENDR : GICD_ICPENDR;
+		break;
+
+	case IRQCHIP_STATE_ACTIVE:
+		reg = val ? GICD_ISACTIVER : GICD_ICACTIVER;
+		break;
+
+	case IRQCHIP_STATE_MASKED:
+		reg = val ? GICD_ICENABLER : GICD_ISENABLER;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	gic_poke_irq(d, reg);
+	return 0;
+}
+
+static int gic_irq_get_irqchip_state(struct irq_data *d,
+				     enum irqchip_irq_state which, bool *val)
+{
+	if (d->hwirq >= gic_data.irq_nr) /* PPI/SPI only */
+		return -EINVAL;
+
+	switch (which) {
+	case IRQCHIP_STATE_PENDING:
+		*val = gic_peek_irq(d, GICD_ISPENDR);
+		break;
+
+	case IRQCHIP_STATE_ACTIVE:
+		*val = gic_peek_irq(d, GICD_ISACTIVER);
+		break;
+
+	case IRQCHIP_STATE_MASKED:
+		*val = !gic_peek_irq(d, GICD_ISENABLER);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void gic_eoi_irq(struct irq_data *d)
 {
 	gic_write_eoir(gic_irq(d));
@@ -418,19 +486,6 @@ static void gic_cpu_init(void)
 }
 
 #ifdef CONFIG_SMP
-static int gic_peek_irq(struct irq_data *d, u32 offset)
-{
-	u32 mask = 1 << (gic_irq(d) % 32);
-	void __iomem *base;
-
-	if (gic_irq_in_rdist(d))
-		base = gic_data_rdist_sgi_base();
-	else
-		base = gic_data.dist_base;
-
-	return !!(readl_relaxed(base + offset + (gic_irq(d) / 32) * 4) & mask);
-}
-
 static int gic_secondary_init(struct notifier_block *nfb,
 			      unsigned long action, void *hcpu)
 {
@@ -601,6 +656,8 @@ static struct irq_chip gic_chip = {
 	.irq_eoi		= gic_eoi_irq,
 	.irq_set_type		= gic_set_type,
 	.irq_set_affinity	= gic_set_affinity,
+	.irq_get_irqchip_state	= gic_irq_get_irqchip_state,
+	.irq_set_irqchip_state	= gic_irq_set_irqchip_state,
 };
 
 #define GIC_ID_NR		(1U << gic_data.rdists.id_bits)
-- 
2.1.4


  parent reply	other threads:[~2015-03-18 11:01 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-18 11:01 [PATCH v4 0/3] genirq: Saving/restoring the irqchip state of an irq line Marc Zyngier
2015-03-18 11:01 ` [PATCH v4 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored Marc Zyngier
2015-04-08 17:48   ` Bjorn Andersson
2015-04-13 16:18     ` Srinivas Kandagatla
2015-04-13 16:21       ` Marc Zyngier
2015-04-08 21:30   ` [tip:irq/core] " tip-bot for Marc Zyngier
2015-03-18 11:01 ` [PATCH v4 2/3] irqchip: GIC: Add support for irq_{get,set}_irqchip_state Marc Zyngier
2015-04-08 21:31   ` [tip:irq/core] irqchip: GIC: Add support for irq_[get, set] _irqchip_state() tip-bot for Marc Zyngier
2015-05-13  2:25   ` [PATCH v4 2/3] irqchip: GIC: Add support for irq_{get,set}_irqchip_state Feng Kan
2015-05-13 11:58     ` Linus Walleij
2015-05-13 15:44       ` Feng Kan
2015-05-14 10:32         ` Linus Walleij
2015-05-14 20:14           ` Feng Kan
2015-05-19  8:40             ` Linus Walleij
2015-05-19 10:01               ` Marc Zyngier
2015-05-19 15:01                 ` Linus Walleij
2015-05-19 21:45                 ` Feng Kan
2015-05-20  7:58                   ` Marc Zyngier
2015-03-18 11:01 ` Marc Zyngier [this message]
2015-04-08 21:31   ` [tip:irq/core] irqchip: GICv3: Add support for irq_[get, set] _irqchip_state() tip-bot for Marc Zyngier
2015-04-13 14:12 ` [PATCH v4 0/3] genirq: Saving/restoring the irqchip state of an irq line Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426676484-21812-4-git-send-email-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=adharmap@codeaurora.org \
    --cc=arnd@arndb.de \
    --cc=bjorn@kryo.se \
    --cc=jason@lakedaemon.net \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pvo@apm.com \
    --cc=sboyd@codeaurora.org \
    --cc=tglx@linutronix.de \
    --cc=tnhuynh@apm.com \
    --cc=toanle@apm.com \
    --cc=yvo@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®