[PATCH] USB: ftdi_sio: Use jtag quirk for SNAP Connect E10

[Doug Goldstein <cardoe@cardoe.com>]

This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order
to avoid attaching a TTY to the JTAG port as this board is based on the
CALAO Systems reference design and needs the same fix up.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
CC: stable <stable@vger.kernel.org>
---
 drivers/usb/serial/ftdi_sio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3086dec..27076d7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1884,7 +1884,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 	struct usb_device *udev = serial->dev;
 
 	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")) ||
+		(udev->product && !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
-- 
2.0.5