From: Javi Merino <javi.merino@arm.com>
To: akpm@linux-foundation.org
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, emil.l.velikov@gmail.com,
jepler@unpythonic.net, daniel@ffwll.ch,
Javi Merino <javi.merino@arm.com>,
Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Alex Elder <elder@linaro.org>
Subject: [PATCH v2 2/4] clk: bcm/kona: use DIV_ROUND_CLOSEST_ULL()
Date: Tue, 24 Mar 2015 14:03:43 +0000 [thread overview]
Message-ID: <1427205825-5444-3-git-send-email-javi.merino@arm.com> (raw)
In-Reply-To: <1427205825-5444-1-git-send-email-javi.merino@arm.com>
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal
implementation and use the kernel one.
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
---
drivers/clk/bcm/clk-kona.c | 28 +++++++---------------------
drivers/clk/bcm/clk-kona.h | 1 -
2 files changed, 7 insertions(+), 22 deletions(-)
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index 05abae89262e..a0ef4f75d457 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -15,6 +15,7 @@
#include "clk-kona.h"
#include <linux/delay.h>
+#include <linux/kernel.h>
/*
* "Policies" affect the frequencies of bus clocks provided by a
@@ -51,21 +52,6 @@ static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val)
/* Divider and scaling helpers */
-/*
- * Implement DIV_ROUND_CLOSEST() for 64-bit dividend and both values
- * unsigned. Note that unlike do_div(), the remainder is discarded
- * and the return value is the quotient (not the remainder).
- */
-u64 do_div_round_closest(u64 dividend, unsigned long divisor)
-{
- u64 result;
-
- result = dividend + ((u64)divisor >> 1);
- (void)do_div(result, divisor);
-
- return result;
-}
-
/* Convert a divider into the scaled divisor value it represents. */
static inline u64 scaled_div_value(struct bcm_clk_div *div, u32 reg_div)
{
@@ -87,7 +73,7 @@ u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths)
combined = (u64)div_value * BILLION + billionths;
combined <<= div->u.s.frac_width;
- return do_div_round_closest(combined, BILLION);
+ return DIV_ROUND_CLOSEST_ULL(combined, BILLION);
}
/* The scaled minimum divisor representable by a divider */
@@ -731,7 +717,7 @@ static unsigned long clk_recalc_rate(struct ccu_data *ccu,
scaled_rate = scale_rate(pre_div, parent_rate);
scaled_rate = scale_rate(div, scaled_rate);
scaled_div = divider_read_scaled(ccu, pre_div);
- scaled_parent_rate = do_div_round_closest(scaled_rate,
+ scaled_parent_rate = DIV_ROUND_CLOSEST_ULL(scaled_rate,
scaled_div);
} else {
scaled_parent_rate = scale_rate(div, parent_rate);
@@ -743,7 +729,7 @@ static unsigned long clk_recalc_rate(struct ccu_data *ccu,
* rate.
*/
scaled_div = divider_read_scaled(ccu, div);
- result = do_div_round_closest(scaled_parent_rate, scaled_div);
+ result = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate, scaled_div);
return (unsigned long)result;
}
@@ -790,7 +776,7 @@ static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
scaled_rate = scale_rate(pre_div, parent_rate);
scaled_rate = scale_rate(div, scaled_rate);
scaled_pre_div = divider_read_scaled(ccu, pre_div);
- scaled_parent_rate = do_div_round_closest(scaled_rate,
+ scaled_parent_rate = DIV_ROUND_CLOSEST_ULL(scaled_rate,
scaled_pre_div);
} else {
scaled_parent_rate = scale_rate(div, parent_rate);
@@ -802,7 +788,7 @@ static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
* the best we can do.
*/
if (!divider_is_fixed(div)) {
- best_scaled_div = do_div_round_closest(scaled_parent_rate,
+ best_scaled_div = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate,
rate);
min_scaled_div = scaled_div_min(div);
max_scaled_div = scaled_div_max(div);
@@ -815,7 +801,7 @@ static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
}
/* OK, figure out the resulting rate */
- result = do_div_round_closest(scaled_parent_rate, best_scaled_div);
+ result = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate, best_scaled_div);
if (scaled_div)
*scaled_div = best_scaled_div;
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index 2537b3072910..6849a64baf6d 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -503,7 +503,6 @@ extern struct clk_ops kona_peri_clk_ops;
/* Externally visible functions */
-extern u64 do_div_round_closest(u64 dividend, unsigned long divisor);
extern u64 scaled_div_max(struct bcm_clk_div *div);
extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
u32 billionths);
--
1.9.1
next prev parent reply other threads:[~2015-03-24 14:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-24 14:03 [PATCH v2 0/4] Consolidate DIV_ROUND_CLOSEST_ULL() Javi Merino
2015-03-24 14:03 ` [PATCH v2 1/4] kernel.h: Implement DIV_ROUND_CLOSEST_ULL Javi Merino
2015-03-24 14:29 ` Jeff Epler
2015-03-24 14:03 ` Javi Merino [this message]
2015-03-24 18:03 ` [PATCH v2 2/4] clk: bcm/kona: use DIV_ROUND_CLOSEST_ULL() Alex Elder
2015-03-24 14:03 ` [PATCH v2 3/4] cpuidle: menu: " Javi Merino
2015-03-24 20:22 ` Rafael J. Wysocki
2015-03-25 11:40 ` Rafael J. Wysocki
2015-03-24 14:03 ` [PATCH v2 4/4] media: cxd2820r: " Javi Merino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427205825-5444-3-git-send-email-javi.merino@arm.com \
--to=javi.merino@arm.com \
--cc=akpm@linux-foundation.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=elder@linaro.org \
--cc=emil.l.velikov@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jepler@unpythonic.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®