From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>,
<linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH] regulator: Defer lookup of supply to regulator_get
Date: Tue, 24 Mar 2015 18:56:05 -0700 [thread overview]
Message-ID: <1427248565-9680-1-git-send-email-bjorn.andersson@sonymobile.com> (raw)
Instead of resolving regulator supplies during registration move this to
the time of a consumer retrieving a handle. The benefit is that it's
possible for one driver to register regulators with internal
dependencies out of order.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/core.c | 92 ++++++++++++++++++++++++----------------
include/linux/regulator/driver.h | 1 +
2 files changed, 57 insertions(+), 36 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f245214..52ddb73 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1325,6 +1325,54 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
return NULL;
}
+static int regulator_resolve_supply(struct regulator_dev *rdev)
+{
+ struct regulator_dev *r;
+ struct device *dev = rdev->dev.parent;
+ int ret;
+
+ /* No supply to resovle? */
+ if (!rdev->supply_name)
+ return 0;
+
+ /* Supply already resolved? */
+ if (rdev->supply)
+ return 0;
+
+ r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
+ if (ret == -ENODEV) {
+ /*
+ * No supply was specified for this regulator and
+ * there will never be one.
+ */
+ return 0;
+ }
+
+ if (!r) {
+ dev_err(dev, "Failed to resolve %s-supply for %s\n",
+ rdev->supply_name, rdev->desc->name);
+ return -EPROBE_DEFER;
+ }
+
+ /* Recursively resolve the supply of the supply */
+ ret = regulator_resolve_supply(r);
+ if (ret < 0)
+ return ret;
+
+ ret = set_supply(rdev, r);
+ if (ret < 0)
+ return ret;
+
+ /* Cascade always-on state to supply */
+ if (_regulator_is_enabled(rdev)) {
+ ret = regulator_enable(rdev->supply);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
/* Internal regulator request function */
static struct regulator *_regulator_get(struct device *dev, const char *id,
bool exclusive, bool allow_dummy)
@@ -1394,6 +1442,12 @@ found:
goto out;
}
+ ret = regulator_resolve_supply(rdev);
+ if (ret < 0) {
+ regulator = ERR_PTR(ret);
+ goto out;
+ }
+
if (!try_module_get(rdev->owner))
goto out;
@@ -3545,7 +3599,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
struct regulator_dev *rdev;
struct device *dev;
int ret, i;
- const char *supply = NULL;
if (regulator_desc == NULL || cfg == NULL)
return ERR_PTR(-EINVAL);
@@ -3659,41 +3712,10 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto scrub;
if (init_data && init_data->supply_regulator)
- supply = init_data->supply_regulator;
+ rdev->supply_name = init_data->supply_regulator;
else if (regulator_desc->supply_name)
- supply = regulator_desc->supply_name;
-
- if (supply) {
- struct regulator_dev *r;
-
- r = regulator_dev_lookup(dev, supply, &ret);
+ rdev->supply_name = regulator_desc->supply_name;
- if (ret == -ENODEV) {
- /*
- * No supply was specified for this regulator and
- * there will never be one.
- */
- ret = 0;
- goto add_dev;
- } else if (!r) {
- dev_err(dev, "Failed to find supply %s\n", supply);
- ret = -EPROBE_DEFER;
- goto scrub;
- }
-
- ret = set_supply(rdev, r);
- if (ret < 0)
- goto scrub;
-
- /* Enable supply if rail is enabled */
- if (_regulator_is_enabled(rdev)) {
- ret = regulator_enable(rdev->supply);
- if (ret < 0)
- goto scrub;
- }
- }
-
-add_dev:
/* add consumers devices */
if (init_data) {
for (i = 0; i < init_data->num_consumer_supplies; i++) {
@@ -3720,8 +3742,6 @@ unset_supplies:
unset_regulator_supplies(rdev);
scrub:
- if (rdev->supply)
- _regulator_put(rdev->supply);
regulator_ena_gpio_free(rdev);
kfree(rdev->constraints);
wash:
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 0f86a182..a15c59d 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -371,6 +371,7 @@ struct regulator_dev {
struct device dev;
struct regulation_constraints *constraints;
struct regulator *supply; /* for tree */
+ const char *supply_name;
struct regmap *regmap;
struct delayed_work disable_work;
--
1.8.2.2
next reply other threads:[~2015-03-25 1:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-25 1:56 Bjorn Andersson [this message]
2015-03-25 4:50 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427248565-9680-1-git-send-email-bjorn.andersson@sonymobile.com \
--to=bjorn.andersson@sonymobile.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®