From: Ian Abbott <abbotti@mev.co.uk>
To: <driverdev-devel@linuxdriverproject.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Ian Abbott <abbotti@mev.co.uk>,
H Hartley Sweeten <hartleys@visionengravers.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 7/7] staging: comedi: comedi_fops: extend spin-lock scope in comedi_event()
Date: Fri, 27 Mar 2015 15:13:06 +0000 [thread overview]
Message-ID: <1427469186-11222-8-git-send-email-abbotti@mev.co.uk> (raw)
In-Reply-To: <1427469186-11222-1-git-send-email-abbotti@mev.co.uk>
`comedi_event()` is called from low-level drivers to handle comedi
asynchronous command event flags. As a safety check, it checks the
subdevice's "run" flags to make sure an asynchronous command is running.
It can also change the run flags to mark the command as no longer
running (possibly also marking it as terminated with an error).
Checking the runflags and modifying them involves two uses of the
subdevice's spin-lock. It seems better to do it with a single use of
the spin-lock. This also avoids possible interactions with
`do_become_nonbusy()`.
Acquire the subdevice's spin-lock at the start of `comedi_event()` and
release it near the end, before a possible call to `kill_fasync()` (but
after it's parameter values have been determined).
Add and make use of few new inline helper functions:
* `__comedi_clear_subdevice_runflags()` -- clears some run flags without
using the spin-lock
* `__comedi_set_subdevice_runflags()` -- sets some run flags without
using the spin-lock
* `__comedi_get_subdevice_runflags()` -- a spin-lockless version of
`comedi_get_subdevice_runflags()
* `__comedi_is_subdevice_running()` -- a spin-lockless version of
* `comedi_is_subdevice_running()`
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/comedi_fops.c | 70 +++++++++++++++++++++++-------------
1 file changed, 46 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 7ae605f..e78ddbe 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -601,24 +601,41 @@ static struct attribute *comedi_dev_attrs[] = {
};
ATTRIBUTE_GROUPS(comedi_dev);
+static void __comedi_clear_subdevice_runflags(struct comedi_subdevice *s,
+ unsigned bits)
+{
+ s->runflags &= ~bits;
+}
+
+static void __comedi_set_subdevice_runflags(struct comedi_subdevice *s,
+ unsigned bits)
+{
+ s->runflags |= bits;
+}
+
static void comedi_update_subdevice_runflags(struct comedi_subdevice *s,
unsigned mask, unsigned bits)
{
unsigned long flags;
spin_lock_irqsave(&s->spin_lock, flags);
- s->runflags &= ~mask;
- s->runflags |= (bits & mask);
+ __comedi_clear_subdevice_runflags(s, mask);
+ __comedi_set_subdevice_runflags(s, bits & mask);
spin_unlock_irqrestore(&s->spin_lock, flags);
}
+static unsigned __comedi_get_subdevice_runflags(struct comedi_subdevice *s)
+{
+ return s->runflags;
+}
+
static unsigned comedi_get_subdevice_runflags(struct comedi_subdevice *s)
{
unsigned long flags;
unsigned runflags;
spin_lock_irqsave(&s->spin_lock, flags);
- runflags = s->runflags;
+ runflags = __comedi_get_subdevice_runflags(s);
spin_unlock_irqrestore(&s->spin_lock, flags);
return runflags;
}
@@ -648,6 +665,13 @@ bool comedi_is_subdevice_running(struct comedi_subdevice *s)
}
EXPORT_SYMBOL_GPL(comedi_is_subdevice_running);
+static bool __comedi_is_subdevice_running(struct comedi_subdevice *s)
+{
+ unsigned runflags = __comedi_get_subdevice_runflags(s);
+
+ return comedi_is_runflags_running(runflags);
+}
+
static bool comedi_is_subdevice_idle(struct comedi_subdevice *s)
{
unsigned runflags = comedi_get_subdevice_runflags(s);
@@ -2646,40 +2670,38 @@ static const struct file_operations comedi_fops = {
void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct comedi_async *async = s->async;
- unsigned runflags = 0;
- unsigned runflags_mask = 0;
- unsigned int events = async->events;
+ unsigned int events;
+ int si_code = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&s->spin_lock, flags);
+ events = async->events;
async->events = 0;
- if (!comedi_is_subdevice_running(s))
+ if (!__comedi_is_subdevice_running(s)) {
+ spin_unlock_irqrestore(&s->spin_lock, flags);
return;
+ }
if (events & COMEDI_CB_CANCEL_MASK)
- runflags_mask |= COMEDI_SRF_RUNNING;
+ __comedi_clear_subdevice_runflags(s, COMEDI_SRF_RUNNING);
/*
- * Remember if an error event has occurred, so an error
- * can be returned the next time the user does a read().
+ * Remember if an error event has occurred, so an error can be
+ * returned the next time the user does a read() or write().
*/
- if (events & COMEDI_CB_ERROR_MASK) {
- runflags_mask |= COMEDI_SRF_ERROR;
- runflags |= COMEDI_SRF_ERROR;
- }
- if (runflags_mask) {
- /*
- * Changes COMEDI_SRF_ERROR and COMEDI_SRF_RUNNING together
- * atomically.
- */
- comedi_update_subdevice_runflags(s, runflags_mask, runflags);
- }
+ if (events & COMEDI_CB_ERROR_MASK)
+ __comedi_set_subdevice_runflags(s, COMEDI_SRF_ERROR);
if (async->cb_mask & events) {
- int si_code;
-
wake_up_interruptible(&async->wait_head);
si_code = async->cmd.flags & CMDF_WRITE ? POLL_OUT : POLL_IN;
- kill_fasync(&dev->async_queue, SIGIO, si_code);
}
+
+ spin_unlock_irqrestore(&s->spin_lock, flags);
+
+ if (si_code)
+ kill_fasync(&dev->async_queue, SIGIO, si_code);
}
EXPORT_SYMBOL_GPL(comedi_event);
--
2.1.4
next prev parent reply other threads:[~2015-03-27 15:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-27 15:12 [PATCH 0/7] staging: comedi: comedi_fops: some runflag and event handling changes Ian Abbott
2015-03-27 15:13 ` [PATCH 1/7] staging: comedi: comedi_fops: rename comedi_set_subdevice_runflags() Ian Abbott
2015-03-27 15:13 ` [PATCH 2/7] staging: comedi: comedi_fops: eliminate a use of subdevice spin-lock Ian Abbott
2015-03-27 15:13 ` [PATCH 3/7] staging: comedi: comedi_fops: simplify comedi_is_subdevice_idle() Ian Abbott
2015-03-27 15:13 ` [PATCH 4/7] staging: comedi: comedi_fops: remove unnecessary s->async use Ian Abbott
2015-03-27 15:13 ` [PATCH 5/7] staging: comedi: comedi_fops: always clear events Ian Abbott
2015-03-27 15:13 ` [PATCH 6/7] staging: comedi: comedi_fops: send SIGIO according to command direction Ian Abbott
2015-03-27 15:13 ` Ian Abbott [this message]
2015-03-30 16:47 ` [PATCH 7/7] staging: comedi: comedi_fops: extend spin-lock scope in comedi_event() Hartley Sweeten
2015-03-31 9:42 ` Ian Abbott
2015-03-31 16:13 ` Hartley Sweeten
2015-04-01 9:10 ` Ian Abbott
2015-03-30 17:13 ` [PATCH 0/7] staging: comedi: comedi_fops: some runflag and event handling changes Hartley Sweeten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427469186-11222-8-git-send-email-abbotti@mev.co.uk \
--to=abbotti@mev.co.uk \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=hartleys@visionengravers.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®