Re: [LINUX PATCH v13 0/2] Add arm pl353 smc memory and nand driver for xilinx zynq soc

[Michal Simek <michal.simek@xilinx.com>]

On 06. 12. 18 13:47, Naga Sureshkumar Relli wrote:
> The following patches add arm pl353 static memory controller driver and NAND
> driver for Xilinx Zynq SoC. The arm pl353 smc supports two interfaces
> i.e nand and NOR/SRAM memory interfaces. The current implementation supports
> only a single SMC instance and nand specific configuration.
> 
> Xilinx Zynq TRM link:
> http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
> 
> ARM pl353 smc TRM link:
> http://infocenter.arm.com/help/topic/com.arm.doc.ddi0380g/DDI0380G_smc_pl350_series_r2p1_trm.pdf
> 
> Tested Micron MT29F2G08ABAEAWP (On-die capable) and AMD/Spansion S34ML01G1.
> This latest series make use of ->exec_op().
> 
> Naga Sureshkumar Relli (2):
>   dt-bindings: memory: Add pl353 smc controller devicetree binding
>     information
>   memory: pl353: Add driver for arm pl353 static memory controller
> 
>  .../bindings/memory-controllers/pl353-smc.txt      |  47 +++
>  drivers/memory/Kconfig                             |   9 +
>  drivers/memory/Makefile                            |   1 +
>  drivers/memory/pl353-smc.c                         | 464 +++++++++++++++++++++
>  include/linux/pl353-smc.h                          |  30 ++
>  5 files changed, 551 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
>  create mode 100644 drivers/memory/pl353-smc.c
>  create mode 100644 include/linux/pl353-smc.h
> 

Applied both to zynq/soc branch.

Thanks,
Michal