From: Valentin Rothberg <valentinrothberg@gmail.com>
To: gregkh@linuxfoundation.org, jslaby@suse.cz,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
realmz6@gmail.com, sonic.zhang@analog.com
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Subject: [PATCH] serial: bfin: ctsrts: enfore Kconfig naming convention
Date: Sun, 12 Apr 2015 17:54:35 +0200 [thread overview]
Message-ID: <1428854075-6241-1-git-send-email-valentinrothberg@gmail.com> (raw)
The CONFIG_ prefix is reserved for Kconfig options in Make and CPP
syntax; static analysis tools rely on this convention. This patch
enforces this behavior for SERIAL_BFIN_{HARD_}CTSRTS.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
---
I found this issue with ./scripts/checkkconfigsymbols.py
---
arch/blackfin/include/asm/bfin_serial.h | 8 ++++----
drivers/tty/serial/bfin_uart.c | 24 ++++++++++++------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index d00d732784b1..b550ada7321b 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -22,9 +22,9 @@
defined(CONFIG_BFIN_UART2_CTSRTS) || \
defined(CONFIG_BFIN_UART3_CTSRTS)
# if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE)
-# define CONFIG_SERIAL_BFIN_HARD_CTSRTS
+# define SERIAL_BFIN_HARD_CTSRTS
# else
-# define CONFIG_SERIAL_BFIN_CTSRTS
+# define SERIAL_BFIN_CTSRTS
# endif
#endif
@@ -50,8 +50,8 @@ struct bfin_serial_port {
#elif ANOMALY_05000363
unsigned int anomaly_threshold;
#endif
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
int cts_pin;
int rts_pin;
#endif
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 155781ece050..ae3cf94b146b 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -74,8 +74,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
static void bfin_serial_reset_irda(struct uart_port *port);
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -110,7 +110,7 @@ static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id)
struct bfin_serial_port *uart = dev_id;
struct uart_port *uport = &uart->port;
unsigned int status = bfin_serial_get_mctrl(uport);
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
UART_CLEAR_SCTS(uart);
if (uport->hw_stopped) {
@@ -700,7 +700,7 @@ static int bfin_serial_startup(struct uart_port *port)
# endif
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
if (request_irq(gpio_to_irq(uart->cts_pin),
bfin_serial_mctrl_cts_int,
@@ -718,7 +718,7 @@ static int bfin_serial_startup(struct uart_port *port)
gpio_direction_output(uart->rts_pin, 0);
}
#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0) {
if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
0, "BFIN_UART_MODEM_STATUS", uart)) {
@@ -766,13 +766,13 @@ static void bfin_serial_shutdown(struct uart_port *port)
free_irq(uart->tx_irq, uart);
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0)
free_irq(gpio_to_irq(uart->cts_pin), uart);
if (uart->rts_pin >= 0)
gpio_free(uart->rts_pin);
#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0)
free_irq(uart->status_irq, uart);
#endif
@@ -788,7 +788,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned int ier, lcr = 0;
unsigned long timeout;
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
if (old == NULL && uart->cts_pin != -1)
termios->c_cflag |= CRTSCTS;
else if (uart->cts_pin == -1)
@@ -1110,8 +1110,8 @@ bfin_serial_console_setup(struct console *co, char *options)
int baud = 57600;
int bits = 8;
int parity = 'n';
-# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+# if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
int flow = 'r';
# else
int flow = 'n';
@@ -1322,8 +1322,8 @@ static int bfin_serial_probe(struct platform_device *pdev)
init_timer(&(uart->rx_dma_timer));
#endif
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL)
uart->cts_pin = -1;
--
2.1.0
next reply other threads:[~2015-04-12 15:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-12 15:54 Valentin Rothberg [this message]
2015-04-14 2:38 ` Sonic Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428854075-6241-1-git-send-email-valentinrothberg@gmail.com \
--to=valentinrothberg@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=realmz6@gmail.com \
--cc=sonic.zhang@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome