[PATCH 2/2] regulator: max77843: Reduce duplication of regulator_desc initializers

[Krzysztof Kozlowski <k.kozlowski.k@gmail.com>]

Replace duplicated SAFEOUT regulators initializers in array of struct
'regulator_desc' arrays with macro. Generated object is the same but
SAFEOUT is described only once.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 drivers/regulator/max77843.c | 48 +++++++++++++++++---------------------------
 1 file changed, 18 insertions(+), 30 deletions(-)

diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
index c132ef527cdd..e4e7687ccd7e 100644
--- a/drivers/regulator/max77843.c
+++ b/drivers/regulator/max77843.c
@@ -112,37 +112,25 @@ static struct regulator_ops max77843_regulator_ops = {
 	.set_voltage_sel        = regulator_set_voltage_sel_regmap,
 };
 
+#define	MAX77843_SAFEOUT(num)	{ \
+	.name		= "SAFEOUT" # num, \
+	.id		= MAX77843_SAFEOUT ## num, \
+	.ops		= &max77843_regulator_ops, \
+	.of_match	= of_match_ptr("SAFEOUT" # num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table), \
+	.volt_table	= max77843_safeout_voltage_table, \
+	.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL, \
+	.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \
+	.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL, \
+	.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
+}
+
 static const struct regulator_desc max77843_supported_regulators[] = {
-	[MAX77843_SAFEOUT1] = {
-		.name		= "SAFEOUT1",
-		.id		= MAX77843_SAFEOUT1,
-		.ops		= &max77843_regulator_ops,
-		.of_match	= of_match_ptr("SAFEOUT1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table),
-		.volt_table	= max77843_safeout_voltage_table,
-		.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
-		.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
-	},
-	[MAX77843_SAFEOUT2] = {
-		.name           = "SAFEOUT2",
-		.id             = MAX77843_SAFEOUT2,
-		.ops            = &max77843_regulator_ops,
-		.of_match	= of_match_ptr("SAFEOUT2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type           = REGULATOR_VOLTAGE,
-		.owner          = THIS_MODULE,
-		.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table),
-		.volt_table	= max77843_safeout_voltage_table,
-		.enable_reg     = MAX77843_SYS_REG_SAFEOUTCTRL,
-		.enable_mask    = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
-		.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
-	},
+	[MAX77843_SAFEOUT1] = MAX77843_SAFEOUT(1),
+	[MAX77843_SAFEOUT2] = MAX77843_SAFEOUT(2),
 	[MAX77843_CHARGER] = {
 		.name		= "CHARGER",
 		.id		= MAX77843_CHARGER,
-- 
2.1.0