From: Alban Bedel <albeu@free.fr>
To: linux-mips@linux-mips.org
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Ralf Baechle <ralf@linux-mips.org>, Alban Bedel <albeu@free.fr>,
Andrew Bresticker <abrestic@chromium.org>,
Qais Yousef <qais.yousef@imgtec.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 12/14] MIPS: Add a basic dtsi for the AR9132
Date: Sat, 18 Apr 2015 18:13:25 +0200 [thread overview]
Message-ID: <1429373607-9226-1-git-send-email-albeu@free.fr> (raw)
In-Reply-To: <1429280669-2986-1-git-send-email-albeu@free.fr>
A basic dtsi for the AR9132 with support for the DDR controller, CPU
and MISC interrupt controller, GPIO controller, the UART and the
watchdog.
Signed-off-by: Alban Bedel <albeu@free.fr>
---
arch/mips/boot/dts/ar9132.dtsi | 119 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
create mode 100644 arch/mips/boot/dts/ar9132.dtsi
diff --git a/arch/mips/boot/dts/ar9132.dtsi b/arch/mips/boot/dts/ar9132.dtsi
new file mode 100644
index 0000000..ede58cd
--- /dev/null
+++ b/arch/mips/boot/dts/ar9132.dtsi
@@ -0,0 +1,119 @@
+/ {
+ compatible = "qca,ar9132";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ cpuintc: cpuintc {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: ddr-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart@18020000 {
+ compatible = "ns8250";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll 2>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9132-gpio",
+ "qca,ar9130-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9132-ppl",
+ "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll 2>;
+ clock-names = "wdt";
+ };
+
+ miscintc: miscintc@18060010 {
+ compatible = "qca,ar9132-misc-intc",
+ qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ };
+ };
+};
--
2.0.0
next prev parent reply other threads:[~2015-04-18 16:13 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-17 14:24 [PATH] MIPS: ath79: Add OF support and DTS for TL-WR1043ND Alban Bedel
2015-04-17 14:24 ` [PATCH 01/14] devicetree: Add bindings for the SoC of the ATH79 familly Alban Bedel
2015-04-17 14:24 ` [PATCH 02/14] MIPS: ath79: Add basic device tree support Alban Bedel
2015-04-18 7:05 ` Paul Bolle
2015-04-18 16:31 ` Alban
2015-04-20 9:50 ` Paul Bolle
2015-04-24 9:39 ` Alban
2015-04-17 14:24 ` [PATCH 03/14] devicetree: Add bindings for the ATH79 DDR controllers Alban Bedel
2015-04-17 14:24 ` [PATCH 04/14] devicetree: Add bindings for the ATH79 interrupt controllers Alban Bedel
2015-04-17 16:17 ` Sergei Shtylyov
2015-04-17 14:24 ` [PATCH 05/14] devicetree: Add bindings for the ATH79 MISC " Alban Bedel
2015-04-17 14:24 ` [PATCH 06/14] MIPS: ath79: Add OF support to the IRQ controllers Alban Bedel
2015-04-17 14:24 ` [PATCH 07/14] devicetree: Add bindings for the ATH79 PLL controllers Alban Bedel
2015-04-17 16:20 ` Sergei Shtylyov
2015-04-17 14:24 ` [PATCH 08/14] MIPS: ath79: Use the common clk API Alban Bedel
2015-04-17 14:24 ` [PATCH 09/14] MIPS: ath79: Add OF support to the clocks Alban Bedel
2015-04-17 14:24 ` [PATCH 10/14] devicetree: Add bindings for the ATH79 GPIO controllers Alban Bedel
2015-04-17 14:24 ` [PATCH 11/14] MIPS: ath79: Add OF support to the GPIO driver Alban Bedel
2015-04-17 14:53 ` Arnd Bergmann
2015-04-18 16:57 ` Alban
2015-04-18 16:13 ` Alban Bedel [this message]
2015-04-18 16:13 ` [PATCH 13/14] of: Add vendor prefix for TP-Link Technologies Co. Ltd Alban Bedel
2015-04-21 14:26 ` Rob Herring
2015-04-18 16:13 ` [PATCH 14/14] MIPS: Add basic support for the TL-WR1043ND version 1 Alban Bedel
2015-04-18 20:33 ` [PATH] MIPS: ath79: Add OF support and DTS for TL-WR1043ND Florian Fainelli
2015-04-19 11:50 ` Alban
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429373607-9226-1-git-send-email-albeu@free.fr \
--to=albeu@free.fr \
--cc=abrestic@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=qais.yousef@imgtec.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®