mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: 함명주 <myungjoo.ham@samsung.com>
To: "Mark Brown" <broonie@opensource.wolfsonmicro.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	박경민 <kyungmin.park@samsung.com>
Cc: "patches@opensource.wolfsonmicro.com" 
	<patches@opensource.wolfsonmicro.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Extcon: Arizona: Add driver for Wolfson Arizona class devices
Date: Mon, 25 Jun 2012 04:48:23 +0000 (GMT)	[thread overview]
Message-ID: <14300735.10471340599701741.JavaMail.weblogic@epv6ml01> (raw)

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=euc-kr, Size: 4163 bytes --]

> Most Wolfson Arizona class audio hub CODECs include a flexible ultra low
> power accessory detection subsystem. This driver exposes initial support
> for this subsystem via the Extcon framework, implementing support for
> ultra low power detection of headphone and headset with the ability to
> detect the polarity of a headset.
> 
> The functionality of the devices is much richer and more flexible than
> the current driver, future patches will extend the features of the
> driver to more fully exploit this.
> 
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---

Hello,

> +static void arizona_start_mic(struct arizona_extcon_info *info)
> +{
> +	struct arizona *arizona = info->arizona;
> +	bool change;
> +	int ret;
> +
> +	info->detecting = true;
> +	info->mic = false;
> +	info->jack_flips = 0;
> +
> +	/* Microphone detection can't use idle mode */
> +	pm_runtime_get(info->dev);

Is it alright to use asynchronous get here?
(sync not required?)

> +
> +	ret = regulator_enable(info->micvdd);
> +	if (ret != 0) {
> +		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
> +			ret);
> +	}
> +
> +	if (info->micd_reva) {
> +		regmap_write(arizona->regmap, 0x80, 0x3);
> +		regmap_write(arizona->regmap, 0x294, 0);
> +		regmap_write(arizona->regmap, 0x80, 0x0);
> +	}
> +
> +	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
> +				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
> +				 &change);
> +	if (!change) {
> +		regulator_disable(info->micvdd);
> +		pm_runtime_put_autosuspend(info->dev);
> +	}
> +}
> +

[]

> +static int __devinit arizona_extcon_probe(struct platform_device *pdev)
> +{
> +	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
> +	struct arizona_pdata *pdata;
> +	struct arizona_extcon_info *info;
> +	int ret, mode;
> +
> +	pdata = dev_get_platdata(arizona->dev);
> +
> +	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> +	if (!info) {
> +		dev_err(&pdev->dev, "failed to allocate memory\n");
> +		ret = -ENOMEM;
> +		goto err;
> +	}
> +
> +	info->micvdd = devm_regulator_get(arizona->dev, "MICVDD");
> +	if (IS_ERR(info->micvdd)) {
> +		ret = PTR_ERR(info->micvdd);
> +		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
> +		goto err;
> +	}
> +
> +	mutex_init(&info->lock);
> +	info->arizona = arizona;
> +	info->dev = &pdev->dev;
> +	info->detecting = true;
> +	platform_set_drvdata(pdev, info);
> +
> +	switch (arizona->type) {
> +	case WM5102:
> +		switch (arizona->rev) {
> +		case 0:
> +			info->micd_reva = true;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	info->edev.name = "Headset Jack";
> +	info->edev.supported_cable = arizona_cable;
> +	info->edev.mutually_exclusive = arizona_exclusions;
> +
> +	ret = extcon_dev_register(&info->edev, arizona->dev);
> +	if (ret < 0) {
> +		dev_err(arizona->dev, "extcon_dev_regster() failed: %d\n",
> +			ret);
> +		goto err;
> +	}
> +
> +	if (pdata->num_micd_configs) {
> +		info->micd_modes = pdata->micd_configs;
> +		info->micd_num_modes = pdata->num_micd_configs;
> +	} else {
> +		info->micd_modes = micd_default_modes;
> +		info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
> +	}
> +
> +	if (arizona->pdata.micd_pol_gpio > 0) {
> +		if (info->micd_modes[0].gpio)
> +			mode = GPIOF_OUT_INIT_HIGH;
> +		else
> +			mode = GPIOF_OUT_INIT_LOW;
> +
> +		ret = devm_gpio_request_one(&pdev->dev,
> +					    arizona->pdata.micd_pol_gpio,
> +					    mode,
> +					    "MICD polarity");
> +		if (ret != 0) {
> +			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
> +				arizona->pdata.micd_pol_gpio, ret);
> +			goto err_register;
> +		}
> +	}
> +
> +	arizona_extcon_set_mode(info, 0);
> +
> +	pm_runtime_enable(&pdev->dev);
> +	pm_runtime_idle(&pdev->dev);
> +	pm_runtime_get_sync(&pdev->dev);
> +
> +	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE,
> +				  "JACKDET rise", arizona_jackdet, info);

Is this arizone_request_irq using threaded irq? (it's fine if so)


Cheers!
MyungJoo.
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

             reply	other threads:[~2012-06-25  4:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-25  4:48 함명주 [this message]
2012-06-25  8:51 ` Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2012-06-28  2:08 MyungJoo Ham
2012-06-28 10:17 ` Mark Brown
2012-06-24 11:09 Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14300735.10471340599701741.JavaMail.weblogic@epv6ml01 \
    --to=myungjoo.ham@samsung.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome