mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: fweisbec@gmail.com, riel@redhat.com, paulmck@linux.vnet.ibm.com
Subject: [PATCH] context_tracking: avoid extra checks on guest_enter and guest_exit
Date: Wed, 29 Apr 2015 11:21:07 +0200	[thread overview]
Message-ID: <1430299267-4740-1-git-send-email-pbonzini@redhat.com> (raw)

guest_enter and guest_exit must be called with interrupts disabled,
since they take the vtime_seqlock with write_seq{lock,unlock}.
Therefore, it is not necessary to check for exceptions, nor to
save/restore the IRQ state, when context tracking functions are
called by guest_enter and guest_exit.

Split the body of context_tracking_entry and context_tracking_exit
out to __-prefixed functions, and use them from KVM.

Rik van Riel has measured this to speed up a tight vmentry/vmexit
loop by about 2%.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 include/linux/context_tracking.h |  4 +--
 kernel/context_tracking.c        | 58 +++++++++++++++++++++++++---------------
 2 files changed, 38 insertions(+), 24 deletions(-)

diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h
index a20a2badbc5f..b4d88318d573 100644
--- a/include/linux/context_tracking.h
+++ b/include/linux/context_tracking.h
@@ -83,13 +83,13 @@ static inline void guest_enter(void)
 		current->flags |= PF_VCPU;
 
 	if (context_tracking_is_enabled())
-		context_tracking_enter(CONTEXT_GUEST);
+		__context_tracking_enter(CONTEXT_GUEST);
 }
 
 static inline void guest_exit(void)
 {
 	if (context_tracking_is_enabled())
-		context_tracking_exit(CONTEXT_GUEST);
+		__context_tracking_exit(CONTEXT_GUEST);
 
 	if (vtime_accounting_enabled())
 		vtime_guest_exit(current);
diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c
index ccdc188884d7..a298915e5d8f 100644
--- a/kernel/context_tracking.c
+++ b/kernel/context_tracking.c
@@ -47,25 +47,11 @@ void context_tracking_cpu_set(int cpu)
  * instructions to execute won't use any RCU read side critical section
  * because this function sets RCU in extended quiescent state.
  */
-void context_tracking_enter(enum ctx_state state)
+void __context_tracking_enter(enum ctx_state state)
 {
-	unsigned long flags;
-
-	/*
-	 * Some contexts may involve an exception occuring in an irq,
-	 * leading to that nesting:
-	 * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
-	 * This would mess up the dyntick_nesting count though. And rcu_irq_*()
-	 * helpers are enough to protect RCU uses inside the exception. So
-	 * just return immediately if we detect we are in an IRQ.
-	 */
-	if (in_interrupt())
-		return;
-
 	/* Kernel threads aren't supposed to go to userspace */
 	WARN_ON_ONCE(!current->mm);
 
-	local_irq_save(flags);
 	if ( __this_cpu_read(context_tracking.state) != state) {
 		if (__this_cpu_read(context_tracking.active)) {
 			/*
@@ -96,6 +82,27 @@ void context_tracking_enter(enum ctx_state state)
 		 */
 		__this_cpu_write(context_tracking.state, state);
 	}
+}
+NOKPROBE_SYMBOL(__context_tracking_enter);
+EXPORT_SYMBOL_GPL(__context_tracking_enter);
+
+void context_tracking_enter(enum ctx_state state)
+{
+	unsigned long flags;
+
+	/*
+	 * Some contexts may involve an exception occuring in an irq,
+	 * leading to that nesting:
+	 * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
+	 * This would mess up the dyntick_nesting count though. And rcu_irq_*()
+	 * helpers are enough to protect RCU uses inside the exception. So
+	 * just return immediately if we detect we are in an IRQ.
+	 */
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+	__context_tracking_enter(state);
 	local_irq_restore(flags);
 }
 NOKPROBE_SYMBOL(context_tracking_enter);
@@ -119,14 +126,8 @@ NOKPROBE_SYMBOL(context_tracking_user_enter);
  * This call supports re-entrancy. This way it can be called from any exception
  * handler without needing to know if we came from userspace or not.
  */
-void context_tracking_exit(enum ctx_state state)
+void __context_tracking_exit(enum ctx_state state)
 {
-	unsigned long flags;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
 	if (__this_cpu_read(context_tracking.state) == state) {
 		if (__this_cpu_read(context_tracking.active)) {
 			/*
@@ -141,6 +142,19 @@ void context_tracking_exit(enum ctx_state state)
 		}
 		__this_cpu_write(context_tracking.state, CONTEXT_KERNEL);
 	}
+}
+NOKPROBE_SYMBOL(__context_tracking_exit);
+EXPORT_SYMBOL_GPL(__context_tracking_exit);
+
+void context_tracking_exit(enum ctx_state state)
+{
+	unsigned long flags;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+	__context_tracking_exit(state);
 	local_irq_restore(flags);
 }
 NOKPROBE_SYMBOL(context_tracking_exit);
-- 
2.3.5


             reply	other threads:[~2015-04-29  9:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-29  9:21 Paolo Bonzini [this message]
2015-04-29 12:02 ` Rik van Riel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430299267-4740-1-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=fweisbec@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®