From: Jon Hunter <jonathanh@nvidia.com>
To: Laxman Dewangan <ldewangan@nvidia.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.cz>
Cc: <linux-serial@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Jon Hunter <jonathanh@nvidia.com>
Subject: [PATCH 7/8] serial: tegra: Correct shutdown of UARTs
Date: Tue, 5 May 2015 15:17:58 +0100 [thread overview]
Message-ID: <1430835479-6613-8-git-send-email-jonathanh@nvidia.com> (raw)
In-Reply-To: <1430835479-6613-1-git-send-email-jonathanh@nvidia.com>
There are two issues in the shutdown path of the UARTs which are:
1. The function tegra_uart_shutdown() calls tegra_uart_flush_buffer()
to stop DMA TX transfers. However, tegra_uart_flush_buffer() is
called after the DMA channels have already been freed and so actually
does nothing.
2. The function that frees the DMA channels
(tegra_uart_dma_channel_free()), unmaps the dma buffer before
freeing the DMA channel and does not ensure the DMA has been
stopped.
Resolve this by fixing the code in tegra_uart_dma_channel_free() to
ensure the DMA is stopped, free the DMA channel and then unmap the DMA
buffer. Finally, remove the unnecessary call to tegra_uart_flush_buffer().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
drivers/tty/serial/serial-tegra.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 987c05665e62..96378da9aefc 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1020,24 +1020,23 @@ scrub:
static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
bool dma_to_memory)
{
- struct dma_chan *dma_chan;
-
if (dma_to_memory) {
+ dmaengine_terminate_all(tup->rx_dma_chan);
+ dma_release_channel(tup->rx_dma_chan);
dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
- dma_chan = tup->rx_dma_chan;
tup->rx_dma_chan = NULL;
tup->rx_dma_buf_phys = 0;
tup->rx_dma_buf_virt = NULL;
} else {
+ dmaengine_terminate_all(tup->tx_dma_chan);
+ dma_release_channel(tup->tx_dma_chan);
dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
UART_XMIT_SIZE, DMA_TO_DEVICE);
- dma_chan = tup->tx_dma_chan;
tup->tx_dma_chan = NULL;
tup->tx_dma_buf_phys = 0;
tup->tx_dma_buf_virt = NULL;
}
- dma_release_channel(dma_chan);
}
static int tegra_uart_startup(struct uart_port *u)
@@ -1104,8 +1103,6 @@ static void tegra_uart_shutdown(struct uart_port *u)
tegra_uart_dma_channel_free(tup, true);
tegra_uart_dma_channel_free(tup, false);
free_irq(u->irq, tup);
-
- tegra_uart_flush_buffer(u);
}
static void tegra_uart_enable_ms(struct uart_port *u)
--
1.9.1
next prev parent reply other threads:[~2015-05-05 16:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-05 14:17 [PATCH 0/8] serial: tegra: various fixes Jon Hunter
2015-05-05 14:17 ` [PATCH 1/8] serial: tegra: Correct delay after TX flush Jon Hunter
2015-05-05 14:17 ` [PATCH 2/8] serial: tegra: Add delay after enabling FIFO mode Jon Hunter
2015-05-05 14:17 ` [PATCH 3/8] serial: tegra: check the count and read if any from dma Jon Hunter
2015-05-05 14:17 ` [PATCH 4/8] serial: tegra: handle race condition on uart rx side Jon Hunter
2015-05-05 14:17 ` [PATCH 5/8] serial: tegra: Use unsigned types for RX and TX byte counts Jon Hunter
2015-05-05 14:17 ` [PATCH 6/8] serial: tegra: Fix cookie used by TX channel Jon Hunter
2015-05-05 14:17 ` Jon Hunter [this message]
2015-05-05 14:17 ` [PATCH 8/8] serial: tegra: Correct error handling on DMA setup Jon Hunter
2015-05-12 8:39 ` Alexandre Courbot
2015-05-12 9:51 ` Jon Hunter
2015-05-13 4:56 ` Alexandre Courbot
2015-05-13 8:23 ` Jon Hunter
2015-05-20 3:57 ` Alexandre Courbot
2015-05-20 9:51 ` Jon Hunter
2015-05-20 12:12 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430835479-6613-8-git-send-email-jonathanh@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome