From: Thierry Reding <thierry.reding@gmail.com>
To: Benson Leung <bleung@chromium.org>,
Rhyland Klein <rklein@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Stephen Warren <swarren@wwwdotorg.org>,
Alexandre Courbot <gnurou@gmail.com>,
linux-clk@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] clk: tegra: Update struct tegra_clk_pll_params kerneldoc
Date: Wed, 6 May 2015 15:43:35 +0200 [thread overview]
Message-ID: <1430919815-22380-1-git-send-email-thierry.reding@gmail.com> (raw)
In-Reply-To: <CANLzEktaOSEFjszR6sRe4heQkp6H_eGi5aKEg8zeLCzaQMMVjQ@mail.gmail.com>
From: Thierry Reding <treding@nvidia.com>
Benson Leung pointed out that the kerneldoc for this structure has
become stale. Update the field descriptions to match the structure
content.
Reported-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
drivers/clk/tegra/clk.h | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index f3782dedbdfb..c47e633616be 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -157,7 +157,7 @@ struct div_nmp {
};
/**
- * struct clk_pll_params - PLL parameters
+ * struct tegra_clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
* @input_max: Maximum input frequency
@@ -168,12 +168,22 @@ struct div_nmp {
* @base_reg: PLL base reg offset
* @misc_reg: PLL misc reg offset
* @lock_reg: PLL lock reg offset
- * @lock_bit_idx: Bit index for PLL lock status
+ * @lock_mask: Bitmask for PLL lock status
* @lock_enable_bit_idx: Bit index to enable PLL lock
+ * @iddq_reg: PLL IDDQ register offset
+ * @iddq_bit_idx: Bit index to enable PLL IDDQ
+ * @aux_reg: AUX register offset
+ * @dyn_ramp_reg: Dynamic ramp control register offset
+ * @ext_misc_reg: Miscellaneous control register offsets
+ * @pmc_divnm_reg: n, m divider PMC override register offset (PLLM)
+ * @pmc_divp_reg: p divider PMC override register offset (PLLM)
+ * @flags: PLL flags
+ * @stepa_shift: Dynamic ramp step A field shift
+ * @stepb_shift: Dynamic ramp step B field shift
* @lock_delay: Delay in us if PLL lock is not used
+ * @div_nmp: offsets and widths on n, m and p fields
* @freq_table: array of frequencies supported by PLL
* @fixed_rate: PLL rate if it is fixed
- * @flags: PLL flags
*
* Flags:
* TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
--
2.3.5
next prev parent reply other threads:[~2015-05-06 13:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 16:38 [PATCH] clk: tegra: Fix comments for structure definitions Rhyland Klein
2015-04-22 9:40 ` Peter De Schrijver
2015-05-04 17:45 ` Benson Leung
2015-05-04 20:32 ` Benson Leung
2015-05-06 13:43 ` Thierry Reding [this message]
2015-05-06 16:13 ` [PATCH] clk: tegra: Update struct tegra_clk_pll_params kerneldoc Rhyland Klein
2015-05-06 17:49 ` Benson Leung
2015-05-07 15:23 ` [PATCH v2] " Thierry Reding
2015-05-07 15:41 ` Benson Leung
2015-05-20 3:39 ` Michael Turquette
2015-05-06 13:40 ` [PATCH] clk: tegra: Fix comments for structure definitions Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430919815-22380-1-git-send-email-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=bleung@chromium.org \
--cc=gnurou@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=pdeschrijver@nvidia.com \
--cc=rklein@nvidia.com \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome