From: Azael Avalos <coproscefalo@gmail.com>
To: Darren Hart <dvhart@infradead.org>,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Azael Avalos <coproscefalo@gmail.com>
Subject: [PATCH v3 4/5] toshiba_acpi: Remove TOS_FAILURE check from some functions
Date: Wed, 6 May 2015 09:35:12 -0600 [thread overview]
Message-ID: <1430926513-6264-5-git-send-email-coproscefalo@gmail.com> (raw)
In-Reply-To: <1430926513-6264-1-git-send-email-coproscefalo@gmail.com>
This patch removes the check for TOS_FAILURE whenever we are using
the tci_raw function call, as that code is only returned by the
{hci, sci}_{read, write} functions and never by the tci_raw, and
thus making that check irrelevant.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
---
drivers/platform/x86/toshiba_acpi.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 8a9dacc..2667192 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -366,7 +366,7 @@ static int sci_open(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to open SCI failed\n");
return 0;
}
@@ -404,7 +404,7 @@ static void sci_close(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to close SCI failed\n");
return;
}
@@ -452,7 +452,7 @@ static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to query Illumination support failed\n");
return 0;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -674,7 +674,7 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
u32 out[TCI_WORDS];
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get ECO led failed\n");
} else if (out[0] == TOS_NOT_INSTALLED) {
pr_info("ECO led not installed");
@@ -796,7 +796,7 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
return;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
sci_close(dev);
return;
@@ -810,7 +810,7 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
sci_close(dev);
return;
@@ -890,7 +890,7 @@ static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB S&C battery level failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -919,7 +919,7 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set USB S&C battery level failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -945,7 +945,7 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_RAPID_DSP;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED ||
@@ -973,7 +973,7 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_RAPID_DSP;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
--
2.3.6
next prev parent reply other threads:[~2015-05-06 15:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 15:35 [PATCH v3 0/5] toshiba_acpi: Driver cleanup Azael Avalos
2015-05-06 15:35 ` [PATCH v3 1/5] toshiba_acpi: Remove no longer needed hci_{read, write}2 functions Azael Avalos
2015-05-06 15:35 ` [PATCH v3 2/5] toshiba_acpi: Rename hci_{read, write}1 functions Azael Avalos
2015-05-06 15:35 ` [PATCH v3 3/5] toshiba_acpi: Comments cleanup Azael Avalos
2015-05-06 15:35 ` Azael Avalos [this message]
2015-05-06 15:35 ` [PATCH v3 5/5] toshiba_acpi: Bump driver version to 0.22 Azael Avalos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430926513-6264-5-git-send-email-coproscefalo@gmail.com \
--to=coproscefalo@gmail.com \
--cc=dvhart@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®