mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rhyland Klein <rklein@nvidia.com>
To: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Mike Turquette <mturquette@linaro.org>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Alexandre Courbot <gnurou@gmail.com>,
	Bill Huang <bilhuang@nvidia.com>,
	Paul Walmsley <pwalmsley@nvidia.com>, Jim Lin <jilin@nvidia.com>,
	Benson Leung <bleung@chromium.org>,
	linux-clk@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 17/21] clk: tegra: pll: Add logic for SS
Date: Tue, 12 May 2015 13:24:00 -0400	[thread overview]
Message-ID: <1431451444-23155-19-git-send-email-rklein@nvidia.com> (raw)
In-Reply-To: <1431451444-23155-1-git-send-email-rklein@nvidia.com>

From: Bill Huang <bilhuang@nvidia.com>

Add some logic for Spread Spectrum control. It is used in conjuncture
with SDM fractional dividers. SSC has to be disabled when we configure
the divider settings.

Signed-off-by: Bill Huang <bilhuang@nvidia.com>
---
v5:
  - Reorderd Patch so set_defaults logic is present already

 drivers/clk/tegra/clk-pll.c |   25 ++++++++++++++++++++++++-
 drivers/clk/tegra/clk.h     |    4 ++++
 2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 36aa2a95fac0..727fedff824d 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -648,6 +648,26 @@ static void _update_pll_cpcon(struct tegra_clk_pll *pll,
 	pll_writel_misc(val, pll);
 }
 
+static void pll_clk_start_ss(struct tegra_clk_pll *pll)
+{
+	if (pll->params->defaults_set && pll->params->ssc_ctrl_en_mask) {
+		u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll);
+
+		val |= pll->params->ssc_ctrl_en_mask;
+		pll_writel(val, pll->params->ssc_ctrl_reg, pll);
+	}
+}
+
+static void pll_clk_stop_ss(struct tegra_clk_pll *pll)
+{
+	if (pll->params->defaults_set && pll->params->ssc_ctrl_en_mask) {
+		u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll);
+
+		val &= ~pll->params->ssc_ctrl_en_mask;
+		pll_writel(val, pll->params->ssc_ctrl_reg, pll);
+	}
+}
+
 static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 			unsigned long rate)
 {
@@ -666,8 +686,10 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 			return 0;
 	}
 
-	if (state)
+	if (state) {
+		pll_clk_stop_ss(pll);
 		_clk_pll_disable(hw);
+	}
 
 	if (!pll->params->defaults_set && pll->params->set_defaults)
 		pll->params->set_defaults(pll);
@@ -680,6 +702,7 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 	if (state) {
 		_clk_pll_enable(hw);
 		ret = clk_pll_wait_for_lock(pll);
+		pll_clk_start_ss(pll);
 	}
 
 	return ret;
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 38b4c95cfb2f..32ce32a056ca 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -184,6 +184,8 @@ struct tegra_clk_pll;
  * @sdm_din_mask:		Mask of SDM divider bits
  * @sdm_ctrl_reg:		Register offset where SDM enable is
  * @sdm_ctrl_en_mask:		Mask of SDM enable bit
+ * @ssc_ctrl_reg:		Register offset where SSC settings are
+ * @ssc_ctrl_en_mask:		Mask of SSC enable bit
  * @aux_reg:			AUX register offset
  * @dyn_ramp_reg:		Dynamic ramp control register offset
  * @ext_misc_reg:		Miscellaneous control register offsets
@@ -251,6 +253,8 @@ struct tegra_clk_pll_params {
 	u32		sdm_din_mask;
 	u32		sdm_ctrl_reg;
 	u32		sdm_ctrl_en_mask;
+	u32		ssc_ctrl_reg;
+	u32		ssc_ctrl_en_mask;
 	u32		aux_reg;
 	u32		dyn_ramp_reg;
 	u32		ext_misc_reg[MAX_PLL_MISC_REG_COUNT];
-- 
1.7.9.5


  parent reply	other threads:[~2015-05-12 17:28 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-12 17:23 [PATCH v5 00/21] Tegra210 Clock Support Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 01/21] clk: tegra: Update struct tegra_clk_pll_params kerneldoc Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 01/21] FROMLIST: " Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 02/21] clk: tegra: Modify tegra_audio_clk_init to accept more plls Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 03/21] clk: tegra: periph: add new periph clks and muxes for Tegra210 Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 04/21] clk: tegra: pll: add tegra_pll_wait_for_lock to clk header Rhyland Klein
2015-05-12 21:52   ` Benson Leung
2015-05-12 17:23 ` [PATCH v5 05/21] clk: tegra: pll: simplify clk_enable_path Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 06/21] clk: tegra: pll: update warning msg Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 07/21] clk: tegra: pll-params: change misc_reg count from 3 -> 6 Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 08/21] clk: tegra: pll: Don't unconditionally set LOCK flags Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 09/21] clk: tegra: pll: Add logic for handling SDM data Rhyland Klein
2015-05-18 22:35   ` Benson Leung
2015-05-12 17:23 ` [PATCH v5 10/21] clk: tegra: pll: Add logic for out-of-table rates for T210 Rhyland Klein
2015-05-13  0:01   ` Benson Leung
2015-05-12 17:23 ` [PATCH v5 11/21] clk: tegra: pll: Add code to handle if resets are supported by PLL Rhyland Klein
2015-05-12 17:23 ` [PATCH v5 12/21] clk: tegra: pll: Add specialized logic for T210 Rhyland Klein
2015-05-13 20:59   ` Benson Leung
2015-05-20 17:24     ` Rhyland Klein
2015-05-20 17:26       ` Benson Leung
2015-05-12 17:23 ` [PATCH v5 13/21] clk: tegra: pll: Add support for PLLMB " Rhyland Klein
2015-05-13 22:04   ` Benson Leung
2015-05-12 17:23 ` [PATCH v5 14/21] clk: tegra: pll: Adjust vco_min if SDM present Rhyland Klein
2015-05-13 22:11   ` Benson Leung
2015-06-04 18:52   ` Stephen Boyd
2015-05-12 17:23 ` [PATCH v5 15/21] clk: tegra: pll: Add dyn_ramp callback Rhyland Klein
2015-05-13 22:20   ` Benson Leung
2015-05-12 17:23 ` [PATCH v5 16/21] clk: tegra: pll: Add Set_default logic Rhyland Klein
2015-05-14  0:04   ` Benson Leung
2015-05-20 17:20     ` Rhyland Klein
2015-05-12 17:24 ` Rhyland Klein [this message]
2015-05-14  0:25   ` [PATCH v5 17/21] clk: tegra: pll: Add logic for SS Benson Leung
2015-05-20 17:19     ` Rhyland Klein
2015-05-12 17:24 ` [PATCH v5 18/21] clk: tegra: pll: Fix _pll_ramp_calc_pll logic and _calc_dynamic_ramp_rate Rhyland Klein
2015-05-14  0:29   ` Benson Leung
2015-05-12 17:24 ` [PATCH v5 19/21] clk: tegra: Add Super Gen5 Logic Rhyland Klein
2015-05-13 20:36   ` Benson Leung
2015-05-14 19:37   ` Benson Leung
2015-05-25  8:19     ` Bill Huang
2015-05-12 17:24 ` [PATCH v5 20/21] clk: tegra210: add support for Tegra210 clocks Rhyland Klein
2015-05-14 20:23   ` Benson Leung
2015-05-20 17:17     ` Rhyland Klein
2015-05-20  9:47   ` Jim Lin
2015-05-20 17:16     ` Rhyland Klein
2015-05-12 17:24 ` [PATCH v5 21/21] clk: tegra: pll: Fix issues with rates for VCO PLLs Rhyland Klein
2015-05-14 20:02   ` Benson Leung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431451444-23155-19-git-send-email-rklein@nvidia.com \
    --to=rklein@nvidia.com \
    --cc=bilhuang@nvidia.com \
    --cc=bleung@chromium.org \
    --cc=gnurou@gmail.com \
    --cc=jilin@nvidia.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=pdeschrijver@nvidia.com \
    --cc=pwalmsley@nvidia.com \
    --cc=sboyd@codeaurora.org \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome