From: Wang Nan <wangnan0@huawei.com>
To: <paulus@samba.org>, <a.p.zijlstra@chello.nl>, <mingo@redhat.com>,
<acme@kernel.org>, <namhyung@kernel.org>, <jolsa@kernel.org>,
<adrian.hunter@intel.com>, <dsahern@gmail.com>,
<ast@plumgrid.com>, <daniel@iogearbox.net>,
<brendan.d.gregg@gmail.com>, <masami.hiramatsu.pt@hitachi.com>
Cc: <linux-kernel@vger.kernel.org>, <lizefan@huawei.com>,
<pi3orama@163.com>, <wangnan0@huawei.com>
Subject: [RFC PATCH v2 23/37] tools lib bpf: load bpf programs in object file into kernel.
Date: Fri, 15 May 2015 07:51:16 +0000 [thread overview]
Message-ID: <1431676290-1230-24-git-send-email-wangnan0@huawei.com> (raw)
In-Reply-To: <1431676290-1230-1-git-send-email-wangnan0@huawei.com>
This patch utilizes previous introduced bpf_load_program to load
programs in the ELF file into kernel. Result is stored in 'fd' field
in 'struct bpf_program'.
During loading, it allocs a log buffer and free it before return.
Note that that buffer is not passed to bpf_load_program() if the first
loading try is successful. Doesn't use a statically allocated log
buffer to avoid potention multi-thread problem.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
---
tools/lib/bpf/libbpf.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 5e25ea7..e8ef78e 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -95,6 +95,8 @@ struct bpf_program {
int map_idx;
} *reloc_desc;
int nr_reloc;
+
+ int fd;
};
struct bpf_object {
@@ -128,10 +130,24 @@ struct bpf_object {
};
#define obj_elf_valid(o) ((o)->elf.fd >= 0)
+static void bpf_unload_program(struct bpf_program *prog)
+{
+ if (!prog)
+ return;
+
+ if (prog->fd >= 0) {
+ close(prog->fd);
+ prog->fd = -1;
+ }
+}
+
static void bpf_clear_program(struct bpf_program *prog)
{
if (!prog)
return;
+
+ bpf_unload_program(prog);
+
if (prog->section_name) {
free(prog->section_name);
prog->section_name = NULL;
@@ -200,6 +216,7 @@ bpf_program_alloc(struct bpf_object *obj, void *data, size_t size,
memcpy(prog->insns, data,
prog->insns_cnt * sizeof(struct bpf_insn));
prog->idx = idx;
+ prog->fd = -1;
return prog;
out:
@@ -756,6 +773,59 @@ static int bpf_obj_collect_reloc(struct bpf_object *obj)
return 0;
}
+static int
+bpf_obj_load_prog(struct bpf_object *obj, struct bpf_program *prog)
+{
+ int fd, err;
+ char *log_buf;
+
+ log_buf = malloc(BPF_LOG_BUF_SIZE);
+ if (!log_buf)
+ pr_warning("Alloc log buffer for bpf loader error, "
+ "continue without log\n");
+
+ fd = bpf_load_program(BPF_PROG_TYPE_KPROBE, prog->insns,
+ prog->insns_cnt, obj->license,
+ obj->kern_version, log_buf,
+ BPF_LOG_BUF_SIZE);
+
+ if (fd >= 0) {
+ prog->fd = fd;
+ pr_debug("load bpf program '%s': fd = %d\n",
+ prog->section_name, prog->fd);
+ err = 0;
+ goto out;
+ }
+
+ err = -EINVAL;
+ pr_warning("load bpf program '%s' failed: %s\n",
+ prog->section_name, strerror(errno));
+
+ if (log_buf)
+ pr_warning("bpf: load: failed to load program '%s':\n"
+ "-- BEGIN DUMP LOG ---\n%s\n-- END LOG --\n",
+ prog->section_name, log_buf);
+
+out:
+ if (log_buf)
+ free(log_buf);
+ return err;
+}
+
+static int
+bpf_obj_load_progs(struct bpf_object *obj)
+{
+ size_t i;
+ int err;
+
+ for (i = 0; i < obj->nr_programs; i++) {
+ err = bpf_obj_load_prog(obj, &obj->programs[i]);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
static int bpf_obj_validate(struct bpf_object *obj)
{
if (obj->kern_version == 0) {
@@ -819,6 +889,13 @@ int bpf_unload_object(struct bpf_object *obj)
free(obj->maps_fds);
}
+ if (obj->programs) {
+ size_t i;
+
+ for (i = 0; i < obj->nr_programs; i++)
+ bpf_unload_program(&obj->programs[i]);
+ }
+
return 0;
}
@@ -831,6 +908,8 @@ int bpf_load_object(struct bpf_object *obj)
goto out;
if (bpf_obj_relocate(obj))
goto out;
+ if (bpf_obj_load_progs(obj))
+ goto out;
return 0;
out:
--
1.8.3.4
next prev parent reply other threads:[~2015-05-15 7:59 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 7:50 [RFC PATCH v2 00/37] perf tools: introduce 'perf bpf' command to load eBPF programs Wang Nan
2015-05-15 7:50 ` [RFC PATCH v2 01/37] tools perf: set vmlinux_path__nr_entries to 0 in vmlinux_path__exit Wang Nan
2015-05-15 7:50 ` [RFC PATCH v2 02/37] tools lib traceevent: install libtraceevent.a into libdir Wang Nan
2015-05-15 7:50 ` [RFC PATCH v2 03/37] tools build: Allow other override features to check Wang Nan
2015-05-15 7:50 ` [RFC PATCH v2 04/37] tools include: add __aligned_u64 to types.h Wang Nan
2015-05-20 12:23 ` [tip:perf/core] " tip-bot for Wang Nan
2015-05-15 7:50 ` [RFC PATCH v2 05/37] tools lib bpf: introduce 'bpf' library to tools Wang Nan
2015-05-15 7:50 ` [RFC PATCH v2 06/37] tools lib bpf: allow set printing function Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 07/37] tools lib bpf: defines basic interface Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 08/37] tools lib bpf: open eBPF object file and do basic validation Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 09/37] tools lib bpf: check swap according to EHDR Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 10/37] tools lib bpf: iterater over elf sections to collect information Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 11/37] tools lib bpf: collect version and license from ELF Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 12/37] tools lib bpf: collect map definitions Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 13/37] tools lib bpf: collect config section in object Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 14/37] tools lib bpf: collect symbol table in object files Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 15/37] tools lib bpf: collect bpf programs from " Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 16/37] tools lib bpf: collect relocation sections from object file Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 17/37] tools lib bpf: collect relocation instructions for each program Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 18/37] tools lib bpf: clean elf memory after loading Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 19/37] tools lib bpf: add bpf.c/h for common bpf operations Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 20/37] tools lib bpf: create maps needed by object file Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 21/37] tools lib bpf: relocation programs Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 22/37] tools lib bpf: introduce bpf_load_program to bpf.c Wang Nan
2015-05-15 7:51 ` Wang Nan [this message]
2015-05-15 7:51 ` [RFC PATCH v2 24/37] tools lib bpf: accessors of bpf_program Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 25/37] tools lib bpf: accessors for struct bpf_object Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 26/37] tools perf: Add new 'perf bpf' command Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 27/37] tools perf: make perf depend on libbpf Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 28/37] tools perf: add 'perf bpf record' subcommand Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 29/37] tools perf: add bpf-loader and open elf object files Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 30/37] tools perf: collect all bpf programs Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 31/37] tools perf: config probe points of eBPF programs during prepartion Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 32/37] tools perf bpf: probe at kprobe points Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 33/37] tools perf bpf: load eBPF object into kernel Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 34/37] tools perf: add a bpf_wrapper global flag Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 35/37] tools perf: add bpf_fd field to evsel and introduce new event syntax Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 36/37] tools perf: generate event argv Wang Nan
2015-05-15 7:51 ` [RFC PATCH v2 37/37] tools perf bpf: passes generated arguments to cmd_record Wang Nan
2015-05-15 8:03 ` [RFC PATCH v2 00/37] perf tools: introduce 'perf bpf' command to load eBPF programs Ingo Molnar
2015-05-15 8:40 ` Wangnan (F)
2015-05-15 8:48 ` Ingo Molnar
2015-05-15 9:42 ` Wangnan (F)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431676290-1230-24-git-send-email-wangnan0@huawei.com \
--to=wangnan0@huawei.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=ast@plumgrid.com \
--cc=brendan.d.gregg@gmail.com \
--cc=daniel@iogearbox.net \
--cc=dsahern@gmail.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=paulus@samba.org \
--cc=pi3orama@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®