From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Kukjin Kim <kgene@kernel.org>,
Russell King <linux@arm.linux.org.uk>,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: [PATCH 2/4] ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos boards
Date: Fri, 15 May 2015 21:49:00 +0900 [thread overview]
Message-ID: <1431694142-32141-3-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1431694142-32141-1-git-send-email-k.kozlowski.k@gmail.com>
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max7693: charger, fuel gauge (max17042),
used on: Trats2,
- s5m/s2mps: RTC, clock,
used on: Arndale, Arndale Octa, Gear 1, Gear 2
This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.
The I2C_GPIO is necessary for MAX77693 on Trats2 because the device is
wired to Exynos4412 over GPIO.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/configs/multi_v7_defconfig | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d524d2e9633c..6a6a292c5bf8 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -280,6 +280,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DIGICOLOR=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_EXYNOS5=y
+CONFIG_I2C_GPIO=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_S3C2410=y
@@ -328,7 +329,11 @@ CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_BATTERY_SBS=y
+CONFIG_BATTERY_MAX17040=y
+CONFIG_BATTERY_MAX17042=y
+CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_TPS65090=y
+CONFIG_CHARGER_MAX77693=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
@@ -357,8 +362,10 @@ CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX8907=y
+CONFIG_MFD_MAX77693=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
@@ -374,9 +381,11 @@ CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
+CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_S2MPS11=y
@@ -529,6 +538,7 @@ CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_S5M=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_MV_XOR=y
@@ -558,6 +568,7 @@ CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
--
2.1.4
next prev parent reply other threads:[~2015-05-15 12:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 12:48 [PATCH 0/4] ARM: multi_v7_defconfig: Stuff for Exynos Krzysztof Kozlowski
2015-05-15 12:48 ` [PATCH 1/4] ARM: multi_v7_defconfig: Enable CPU idle " Krzysztof Kozlowski
2015-05-15 12:49 ` Krzysztof Kozlowski [this message]
2015-05-15 12:49 ` [PATCH 3/4] ARM: multi_v7_defconfig: Enable TMU " Krzysztof Kozlowski
2015-05-15 12:49 ` [PATCH 4/4] ARM: multi_v7_defconfig: Enable OHCI on Exynos Krzysztof Kozlowski
2015-05-15 14:12 ` [PATCH 0/4] ARM: multi_v7_defconfig: Stuff for Exynos Javier Martinez Canillas
2015-05-16 0:33 ` Krzysztof Kozłowski
2015-05-17 8:09 [PATCH v6 00/13] ARM: dts: exynos4: labels for overriding nodes Krzysztof Kozlowski
2015-05-17 8:09 ` [PATCH 2/4] ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos boards Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431694142-32141-3-git-send-email-k.kozlowski.k@gmail.com \
--to=k.kozlowski.k@gmail.com \
--cc=arnd@arndb.de \
--cc=javier.martinez@collabora.co.uk \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®