From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754849AbbEPHaW (ORCPT <rfc822;w@1wt.eu>);
	Sat, 16 May 2015 03:30:22 -0400
Received: from mailgw01.mediatek.com ([210.61.82.183]:33876 "EHLO
	mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org
	with ESMTP id S1752893AbbEPHaU (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Sat, 16 May 2015 03:30:20 -0400
X-Listener-Flag: 11101
From: Yingjoe Chen <yingjoe.chen@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
CC: <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
        <srv_heupstream@mediatek.com>,
        Yingjoe Chen <yingjoe.chen@mediatek.com>
Subject: [PATCH] ARM: dts: mt8127: correct uart instance address
Date: Sat, 16 May 2015 15:30:11 +0800
Message-ID: <1431761411-29516-1-git-send-email-yingjoe.chen@mediatek.com>
X-Mailer: git-send-email 1.8.1.1.dirty
MIME-Version: 1.0
Content-Type: text/plain
X-MTK: N
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org


This is based on v4.1-rc1

------------8<-------------------------------------------
The instance address for uart nodes are incorrect. Correct them.

Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
---
 arch/arm/boot/dts/mt8127.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index aaa7862..ca3402e 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -107,7 +107,7 @@
 			      <0 0x10216000 0 0x2000>;
 		};
 
-		uart0: serial@11006000 {
+		uart0: serial@11002000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
@@ -115,7 +115,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@11007000 {
+		uart1: serial@11003000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
@@ -123,7 +123,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@11008000 {
+		uart2: serial@11004000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
@@ -131,7 +131,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@11009000 {
+		uart3: serial@11005000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-- 
1.8.1.1.dirty