mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Anda-Maria Nicolae <anda-maria.nicolae@intel.com>
To: sre@kernel.org, dbaryshkov@gmail.com, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	dwmw2@infradead.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 2/3] Documentation: devicetree: Add Richtek RT9455 bindings
Date: Mon, 25 May 2015 13:22:22 +0300	[thread overview]
Message-ID: <1432549343-5756-3-git-send-email-anda-maria.nicolae@intel.com> (raw)
In-Reply-To: <1432549343-5756-1-git-send-email-anda-maria.nicolae@intel.com>

Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@intel.com>
---
 .../devicetree/bindings/power/rt9455_charger.txt   |   46 ++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/rt9455_charger.txt

diff --git a/Documentation/devicetree/bindings/power/rt9455_charger.txt b/Documentation/devicetree/bindings/power/rt9455_charger.txt
new file mode 100644
index 0000000..bb46842
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rt9455_charger.txt
@@ -0,0 +1,46 @@
+Binding for Richtek rt9455 battery charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "richtek,rt9455"
+
+- reg:					integer, i2c address of the device.
+- richtek,output-charge-current:	integer, output current in uA, from the
+					charger to the battery.
+- richtek,end-of-charge-percentage:	integer, percent of the output charge current.
+					When the current in constant-voltage phase drops
+					below output_charge_current x end-of-charge-percentage,
+					charge is terminated.
+- richtek,battery-regulation-voltage:	integer, maximum battery voltage in uV.
+- richtek,boost-output-voltage:		integer, maximum voltage in uV, provided to consumer
+					devices, when the charger is in boost mode.
+
+Optional properties:
+- richtek,min-input-voltage-regulation: integer, input voltage threshold in uA, used to
+					determine when to decrease voltage level when
+					the over current of the input power source occurs.
+					This prevents input voltage drop due to insufficient
+					current provided by the power source.
+- richtek,avg-input-current-regulation: integer, input current in uA, the charger should
+					drain from the power source.
+
+Example:
+
+rt9455@22 {
+	compatible = "richtek,rt9455";
+	reg = <0x22>;
+
+	interrupt-parent = <&gpio1>;
+	interrupts = <0 1>;
+
+	interrupt-gpio = <&gpio1 0 1>;
+	reset-gpio = <&gpio1 1 1>;
+
+	richtek,output-charge-current	    = <500000>;
+	richtek,end-of-charge-percentage    = <10>;
+	richtek,battery-regulation-voltage  = <4200000>;
+	richtek,boost-output-voltage	    = <5050000>;
+
+	richtek,min-input-voltage-regulation = <4500000>;
+	richtek,avg-input-current-regulation = <500000>;
+};
-- 
1.7.9.5


  parent reply	other threads:[~2015-05-25 10:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-25 10:22 [PATCH 0/3] Add support for Richtek RT9455 battery charger Anda-Maria Nicolae
2015-05-25 10:22 ` [PATCH 1/3] of: Add vendor prefix for Richtek Technology Corporation Anda-Maria Nicolae
2015-05-25 10:22 ` Anda-Maria Nicolae [this message]
2015-05-25 10:22 ` [PATCH 3/3] power_supply: Add support for Richtek RT9455 battery charger Anda-Maria Nicolae
2015-05-29  2:42 ` [PATCH 0/3] " Sebastian Reichel
2015-05-29 14:25 [PATCH v7 " Anda-Maria Nicolae
2015-05-29 14:25 ` [PATCH 2/3] Documentation: devicetree: Add Richtek RT9455 bindings Anda-Maria Nicolae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432549343-5756-3-git-send-email-anda-maria.nicolae@intel.com \
    --to=anda-maria.nicolae@intel.com \
    --cc=dbaryshkov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®