From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Liviu Dudau <Liviu.Dudau@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
"Jon Medhurst (Tixy)" <tixy@linaro.org>,
Arnd Bergmann <arnd@arndb.de>, Kevin Hilman <khilman@kernel.org>,
Olof Johansson <olof@lixom.net>
Subject: [PATCH v3 0/5] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support
Date: Wed, 27 May 2015 10:53:13 +0100 [thread overview]
Message-ID: <1432720398-5701-1-git-send-email-sudeep.holla@arm.com> (raw)
Hi,
This patch series adds support for:
1. SCPI(System Control and Power Interface) mailbox protocol driver.
It uses ARM MHU mailbox controller driver on Juno but can work with
any mailbox controllers using standard mailbox APIs
2. Add support for clocks provided by SCP firmware through the SCPI
interface
3. Using the existing arm_big_little cpufreq driver and the newly
added SCPI clock driver, it also adds support for CPU DVFS on
ARM64 JUNO development platforms.
The SCPI protocol document is available @[1],[2]
I am not sure which tree would be appropriate to merge this. The
clock and cpufreq drivers depend on the SCPI protocol header.
Changes v2->v3:
- Minor fix in SCPI driver and added Tixy's reviewed-by tag
- Updated scpi clock driver to incorporate all the comments from
Stephen
- Added Viresh's ack
Changes v1->v2:
- Updated the token handling in scpi driver as per Tixy's
suggestion along with other review comments
- Removed multiple drivers in scpi clock as Lorenzo suggested
- Added free_opp_table in scpi-cpufreq as Viresh suggested
- Separated the DT binding document
- Moved SCPI protocol driver to drivers/firmware
Regards,
Sudeep
[1] http://community.arm.com/servlet/JiveServlet/download/8401-45-18326/DUI0922B_scp_message_interface.pdf
[2] https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=DUI0922B_scp_message_interface.pdf
v1: https://lkml.org/lkml/2015/4/27/232
v2: https://lkml.org/lkml/2015/5/14/470
Sudeep Holla (5):
Documentation: add DT binding for ARM System Control and Power
Interface(SCPI) protocol
firmware: add support for ARM System Control and Power Interface(SCPI)
protocol
clk: add support for clocks provided by SCP(System Control Processor)
clk: scpi: add support for cpufreq virtual device
cpufreq: arm_big_little: add SCPI interface driver
Documentation/devicetree/bindings/arm/arm,scpi.txt | 121 ++++
drivers/clk/Kconfig | 10 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-scpi.c | 299 +++++++++
drivers/cpufreq/Kconfig.arm | 9 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/scpi-cpufreq.c | 124 ++++
drivers/firmware/Kconfig | 19 +
drivers/firmware/Makefile | 1 +
drivers/firmware/arm_scpi.c | 709 +++++++++++++++++++++
include/linux/scpi_protocol.h | 62 ++
11 files changed, 1356 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/arm,scpi.txt
create mode 100644 drivers/clk/clk-scpi.c
create mode 100644 drivers/cpufreq/scpi-cpufreq.c
create mode 100644 drivers/firmware/arm_scpi.c
create mode 100644 include/linux/scpi_protocol.h
--
1.9.1
next reply other threads:[~2015-05-27 9:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 9:53 Sudeep Holla [this message]
2015-05-27 9:53 ` [PATCH v3 1/5] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol Sudeep Holla
2015-05-27 13:37 ` Mark Rutland
2015-05-27 14:52 ` Sudeep Holla
2015-05-27 9:53 ` [PATCH v3 2/5] firmware: add support " Sudeep Holla
2015-05-27 9:53 ` [PATCH v3 3/5] clk: add support for clocks provided by SCP(System Control Processor) Sudeep Holla
2015-06-04 20:20 ` Stephen Boyd
2015-06-05 9:36 ` Sudeep Holla
2015-06-05 17:10 ` Sudeep Holla
2015-06-06 1:12 ` Stephen Boyd
2015-05-27 9:53 ` [PATCH v3 4/5] clk: scpi: add support for cpufreq virtual device Sudeep Holla
2015-06-04 21:19 ` Stephen Boyd
2015-06-05 9:13 ` Sudeep Holla
2015-05-27 9:53 ` [PATCH v3 5/5] cpufreq: arm_big_little: add SCPI interface driver Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432720398-5701-1-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=Liviu.Dudau@arm.com \
--cc=arnd@arndb.de \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=olof@lixom.net \
--cc=tixy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®