From: Denys Vlasenko <dvlasenk@redhat.com>
To: Ingo Molnar <mingo@kernel.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Steven Rostedt <rostedt@goodmis.org>,
Borislav Petkov <bp@alien8.de>, "H. Peter Anvin" <hpa@zytor.com>,
Andy Lutomirski <luto@amacapital.net>,
Oleg Nesterov <oleg@redhat.com>,
Frederic Weisbecker <fweisbec@gmail.com>,
Alexei Starovoitov <ast@plumgrid.com>,
Will Drewry <wad@chromium.org>, Kees Cook <keescook@chromium.org>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] x86/asm/entry/32: Open-code CLEAR_RREGS. No code changes.
Date: Tue, 2 Jun 2015 21:04:01 +0200 [thread overview]
Message-ID: <1433271842-9139-1-git-send-email-dvlasenk@redhat.com> (raw)
This macro is small, has only four callsites, and one of them is
slightly different using a conditional parameter.
A few saved lines aren't worth the resulting obfuscation.
Generated machine code is identical.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Ingo Molnar <mingo@kernel.org>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Alexei Starovoitov <ast@plumgrid.com>
CC: Will Drewry <wad@chromium.org>
CC: Kees Cook <keescook@chromium.org>
CC: x86@kernel.org
CC: linux-kernel@vger.kernel.org
---
These two patches are on top of "Simplify zeroing of pt_regs->r8..r11" patch.
arch/x86/ia32/ia32entry.S | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 2801cbe..86cbfe6 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -29,15 +29,6 @@
.section .entry.text, "ax"
- /* clobbers %rax */
- .macro CLEAR_RREGS _r9=rax
- xorl %eax,%eax
- movq %rax,R11(%rsp)
- movq %rax,R10(%rsp)
- movq %\_r9,R9(%rsp)
- movq %rax,R8(%rsp)
- .endm
-
/*
* Reload arg registers from stack in case ptrace changed them.
* We don't reload %eax because syscall_trace_enter() returned
@@ -243,7 +234,11 @@ sysexit_from_sys_call:
TRACE_IRQS_OFF
testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jz \exit
- CLEAR_RREGS
+ xorl %eax, %eax
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
jmp int_with_check
.endm
@@ -267,7 +262,11 @@ sysenter_tracesys:
jz sysenter_auditsys
#endif
SAVE_EXTRA_REGS
- CLEAR_RREGS
+ xorl %eax, %eax
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
@@ -407,7 +406,11 @@ cstar_tracesys:
#endif
xchgl %r9d,%ebp
SAVE_EXTRA_REGS
- CLEAR_RREGS r9
+ xorl %eax, %eax
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %r9, R9(%rsp)
+ movq %rax, R8(%rsp)
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 1 /* reload args from stack in case ptrace changed it */
@@ -422,7 +425,11 @@ ia32_badarg:
jmp ia32_sysret
ia32_ret_from_sys_call:
- CLEAR_RREGS
+ xorl %eax, %eax
+ movq %rax, R11(%rsp)
+ movq %rax, R10(%rsp)
+ movq %rax, R9(%rsp)
+ movq %rax, R8(%rsp)
jmp int_ret_from_sys_call
/*
--
1.8.1.4
next reply other threads:[~2015-06-02 19:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-02 19:04 Denys Vlasenko [this message]
2015-06-02 19:04 ` [PATCH 2/2] x86/asm/entry/32: Open-code LOAD_ARGS32. " Denys Vlasenko
2015-06-02 19:27 ` Borislav Petkov
2015-06-07 8:31 ` [tip:x86/asm] x86/asm/entry/32: Open-code LOAD_ARGS32 tip-bot for Denys Vlasenko
2015-06-02 19:34 ` [PATCH 1/2] x86/asm/entry/32: Open-code CLEAR_RREGS. No code changes Steven Rostedt
2015-06-02 20:25 ` Denys Vlasenko
2015-06-03 7:04 ` Ingo Molnar
2015-06-07 8:31 ` [tip:x86/asm] x86/asm/entry/32: Open-code CLEAR_RREGS tip-bot for Denys Vlasenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433271842-9139-1-git-send-email-dvlasenk@redhat.com \
--to=dvlasenk@redhat.com \
--cc=ast@plumgrid.com \
--cc=bp@alien8.de \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@kernel.org \
--cc=oleg@redhat.com \
--cc=rostedt@goodmis.org \
--cc=torvalds@linux-foundation.org \
--cc=wad@chromium.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®