From: Borislav Petkov <bp@alien8.de>
To: Ingo Molnar <mingo@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 11/20] x86/mm/pat: Extend set_page_memtype() to support Write-Through type
Date: Thu, 4 Jun 2015 18:55:19 +0200 [thread overview]
Message-ID: <1433436928-31903-12-git-send-email-bp@alien8.de> (raw)
In-Reply-To: <1433436928-31903-1-git-send-email-bp@alien8.de>
From: Toshi Kani <toshi.kani@hp.com>
As set_memory_wb() calls free_ram_pages_type(), which then calls
set_page_memtype() with -1, _PGMT_DEFAULT is used for tracking the WB
type. _PGMT_WB is defined but unused. Thus, rename _PGMT_DEFAULT to
_PGMT_WB to clarify the usage, and release the slot used by _PGMT_WB.
Furthermore, change free_ram_pages_type() to call set_page_memtype()
with _PGMT_WB, and get_page_memtype() to return _PAGE_CACHE_MODE_WB for
_PGMT_WB.
Then, define _PGMT_WT in the freed slot. This allows set_page_memtype()
to track the WT type.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: arnd@arndb.de
Cc: Elliott@hp.com
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: stefan.bader@canonical.com
Cc: x86-ml <x86@kernel.org>
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433187393-22688-9-git-send-email-toshi.kani@hp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/mm/pat.c | 59 +++++++++++++++++++++++++++----------------------------
1 file changed, 29 insertions(+), 30 deletions(-)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 076187c76d7a..188e3e07eeeb 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -70,18 +70,22 @@ __setup("debugpat", pat_debug_setup);
#ifdef CONFIG_X86_PAT
/*
- * X86 PAT uses page flags WC and Uncached together to keep track of
- * memory type of pages that have backing page struct. X86 PAT supports 3
- * different memory types, _PAGE_CACHE_MODE_WB, _PAGE_CACHE_MODE_WC and
- * _PAGE_CACHE_MODE_UC_MINUS and fourth state where page's memory type has not
- * been changed from its default (value of -1 used to denote this).
- * Note we do not support _PAGE_CACHE_MODE_UC here.
+ * X86 PAT uses page flags arch_1 and uncached together to keep track of
+ * memory type of pages that have backing page struct.
+ *
+ * X86 PAT supports 4 different memory types:
+ * - _PAGE_CACHE_MODE_WB
+ * - _PAGE_CACHE_MODE_WC
+ * - _PAGE_CACHE_MODE_UC_MINUS
+ * - _PAGE_CACHE_MODE_WT
+ *
+ * _PAGE_CACHE_MODE_WB is the default type.
*/
-#define _PGMT_DEFAULT 0
+#define _PGMT_WB 0
#define _PGMT_WC (1UL << PG_arch_1)
#define _PGMT_UC_MINUS (1UL << PG_uncached)
-#define _PGMT_WB (1UL << PG_uncached | 1UL << PG_arch_1)
+#define _PGMT_WT (1UL << PG_uncached | 1UL << PG_arch_1)
#define _PGMT_MASK (1UL << PG_uncached | 1UL << PG_arch_1)
#define _PGMT_CLEAR_MASK (~_PGMT_MASK)
@@ -89,14 +93,14 @@ static inline enum page_cache_mode get_page_memtype(struct page *pg)
{
unsigned long pg_flags = pg->flags & _PGMT_MASK;
- if (pg_flags == _PGMT_DEFAULT)
- return -1;
+ if (pg_flags == _PGMT_WB)
+ return _PAGE_CACHE_MODE_WB;
else if (pg_flags == _PGMT_WC)
return _PAGE_CACHE_MODE_WC;
else if (pg_flags == _PGMT_UC_MINUS)
return _PAGE_CACHE_MODE_UC_MINUS;
else
- return _PAGE_CACHE_MODE_WB;
+ return _PAGE_CACHE_MODE_WT;
}
static inline void set_page_memtype(struct page *pg,
@@ -113,11 +117,12 @@ static inline void set_page_memtype(struct page *pg,
case _PAGE_CACHE_MODE_UC_MINUS:
memtype_flags = _PGMT_UC_MINUS;
break;
- case _PAGE_CACHE_MODE_WB:
- memtype_flags = _PGMT_WB;
+ case _PAGE_CACHE_MODE_WT:
+ memtype_flags = _PGMT_WT;
break;
+ case _PAGE_CACHE_MODE_WB:
default:
- memtype_flags = _PGMT_DEFAULT;
+ memtype_flags = _PGMT_WB;
break;
}
@@ -401,8 +406,10 @@ static int pat_pagerange_is_ram(resource_size_t start, resource_size_t end)
/*
* For RAM pages, we use page flags to mark the pages with appropriate type.
- * The page flags are limited to three types, WB, WC and UC-. WT and WP requests
- * fail with -EINVAL, and UC gets redirected to UC-.
+ * The page flags are limited to four types, WB (default), WC, WT and UC-.
+ * WP request fails with -EINVAL, and UC gets redirected to UC-. Setting
+ * a new memory type is only allowed for a page mapped with the default WB
+ * type.
*
* Here we do two passes:
* - Find the memtype of all the pages in the range, look for any conflicts.
@@ -415,8 +422,7 @@ static int reserve_ram_pages_type(u64 start, u64 end,
struct page *page;
u64 pfn;
- if ((req_type == _PAGE_CACHE_MODE_WT) ||
- (req_type == _PAGE_CACHE_MODE_WP)) {
+ if (req_type == _PAGE_CACHE_MODE_WP) {
if (new_type)
*new_type = _PAGE_CACHE_MODE_UC_MINUS;
return -EINVAL;
@@ -433,7 +439,7 @@ static int reserve_ram_pages_type(u64 start, u64 end,
page = pfn_to_page(pfn);
type = get_page_memtype(page);
- if (type != -1) {
+ if (type != _PAGE_CACHE_MODE_WB) {
pr_info("x86/PAT: reserve_ram_pages_type failed [mem %#010Lx-%#010Lx], track 0x%x, req 0x%x\n",
start, end - 1, type, req_type);
if (new_type)
@@ -460,7 +466,7 @@ static int free_ram_pages_type(u64 start, u64 end)
for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
page = pfn_to_page(pfn);
- set_page_memtype(page, -1);
+ set_page_memtype(page, _PAGE_CACHE_MODE_WB);
}
return 0;
}
@@ -601,7 +607,7 @@ int free_memtype(u64 start, u64 end)
* Only to be called when PAT is enabled
*
* Returns _PAGE_CACHE_MODE_WB, _PAGE_CACHE_MODE_WC, _PAGE_CACHE_MODE_UC_MINUS
- * or _PAGE_CACHE_MODE_UC
+ * or _PAGE_CACHE_MODE_WT.
*/
static enum page_cache_mode lookup_memtype(u64 paddr)
{
@@ -613,16 +619,9 @@ static enum page_cache_mode lookup_memtype(u64 paddr)
if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
struct page *page;
- page = pfn_to_page(paddr >> PAGE_SHIFT);
- rettype = get_page_memtype(page);
- /*
- * -1 from get_page_memtype() implies RAM page is in its
- * default state and not reserved, and hence of type WB
- */
- if (rettype == -1)
- rettype = _PAGE_CACHE_MODE_WB;
- return rettype;
+ page = pfn_to_page(paddr >> PAGE_SHIFT);
+ return get_page_memtype(page);
}
spin_lock(&memtype_lock);
--
2.3.5
next prev parent reply other threads:[~2015-06-04 17:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 16:55 [PATCH 00/20] tip queue 2015-06-04 Borislav Petkov
2015-06-04 16:55 ` [PATCH 01/20] x86/mm/pat: Untangle pat_init() Borislav Petkov
2015-06-07 17:39 ` [tip:x86/mm] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 02/20] x86/mm/pat: Emulate PAT when it is disabled Borislav Petkov
2015-06-07 17:39 ` [tip:x86/mm] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 03/20] x86/mm/pat: Remove pat_enabled() checks Borislav Petkov
2015-06-07 17:40 ` [tip:x86/mm] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 04/20] x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Borislav Petkov
2015-06-04 16:55 ` [PATCH 05/20] x86/mm/pat: Change reserve_memtype() for Write-Through type Borislav Petkov
2015-06-07 17:40 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 06/20] x86/mm: Teach is_new_memtype_allowed() about " Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 07/20] x86/mm, asm-generic: Add ioremap_wt() for creating Write-Through mappings Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 08/20] arch/*/io.h: Add ioremap_wt() to all architectures Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 09/20] video/fbdev, asm/io.h: Remove ioremap_writethrough() Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 10/20] x86/mm/pat: Add pgprot_writethrough() Borislav Petkov
2015-06-07 17:42 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` Borislav Petkov [this message]
2015-06-07 17:42 ` [tip:x86/mm] x86/mm/pat: Extend set_page_memtype() to support Write-Through type tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 12/20] x86/mm: Add set_memory_wt() for " Borislav Petkov
2015-06-07 17:42 ` [tip:x86/mm] x86/mm/pat: " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 13/20] drivers/block/pmem: Map NVDIMM in Write-Through mode Borislav Petkov
2015-06-07 17:43 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 14/20] x86/mce: Add Local MCE definitions Borislav Petkov
2015-06-07 17:43 ` [tip:x86/core] " tip-bot for Ashok Raj
2015-06-04 16:55 ` [PATCH 15/20] x86/mce: Add infrastructure to support Local MCE Borislav Petkov
2015-06-07 17:43 ` [tip:x86/core] " tip-bot for Ashok Raj
2015-06-04 16:55 ` [PATCH 16/20] x86/mce: Handle Local MCE events Borislav Petkov
2015-06-07 17:44 ` [tip:x86/core] " tip-bot for Ashok Raj
2015-06-04 16:55 ` [PATCH 17/20] x86: Kill CONFIG_X86_HT Borislav Petkov
2015-06-07 17:44 ` [tip:x86/core] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 18/20] x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers Borislav Petkov
2015-06-07 17:44 ` [tip:x86/core] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 19/20] x86/microcode: Disable builtin microcode loading on 32-bit for now Borislav Petkov
2015-06-07 17:45 ` [tip:x86/microcode] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 20/20] x86/microcode: Correct variables type Borislav Petkov
2015-06-07 17:45 ` [tip:x86/microcode] x86/microcode: Correct CPU family related variable types tip-bot for Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433436928-31903-12-git-send-email-bp@alien8.de \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®