From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Liviu Dudau <Liviu.Dudau@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
"Jon Medhurst (Tixy)" <tixy@linaro.org>,
Arnd Bergmann <arnd@arndb.de>, Kevin Hilman <khilman@kernel.org>,
Olof Johansson <olof@lixom.net>
Subject: [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno
Date: Mon, 8 Jun 2015 11:40:00 +0100 [thread overview]
Message-ID: <1433760002-24120-7-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1433760002-24120-1-git-send-email-sudeep.holla@arm.com>
This patch adds support for the MHU mailbox peripheral used on Juno by
application processors to communicate with remote SCP handling most of
the CPU/system power management. It also adds the SRAM reserving the
shared memory and SCPI message protocol using that shared memory.
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 31 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/arm/juno-clocks.dtsi | 23 +++++++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index e3ee96036eca..f8069a98da25 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -17,6 +17,18 @@
};
};
+ mailbox: mhu@2b1f0000 {
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0x0 0x2b1f0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_lpri_rx",
+ "mhu_hpri_rx";
+ #mbox-cells = <1>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ };
+
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
@@ -44,6 +56,25 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
+ sram: sram@2e000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x2e000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x2e000000 0x8000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+ };
+
/include/ "juno-clocks.dtsi"
dma@7ff00000 {
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index 25352ed943e6..64af7370815a 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -42,3 +42,26 @@
clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
+
+ scpi {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 1>;
+ shmem = <&cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "vbig", "vlittle", "vgpu";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+ };
--
1.9.1
next prev parent reply other threads:[~2015-06-08 10:41 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-08 10:39 [PATCH v4 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol Sudeep Holla
2015-07-08 13:59 ` Sudeep Holla
2015-07-22 8:43 ` Liviu Dudau
2015-07-22 9:25 ` Sudeep Holla
2015-07-22 9:55 ` Mark Rutland
2015-07-22 15:56 ` Sudeep Holla
2015-07-22 16:23 ` Mark Rutland
2015-06-08 10:39 ` [PATCH v4 2/8] firmware: add support " Sudeep Holla
2015-06-11 11:54 ` Jassi Brar
2015-06-11 13:23 ` Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor) Sudeep Holla
2015-07-02 17:23 ` Stephen Boyd
2015-07-03 14:52 ` Sudeep Holla
2015-07-03 16:12 ` Sudeep Holla
2015-07-06 19:52 ` Stephen Boyd
2015-07-07 16:03 ` Sudeep Holla
2015-07-08 1:46 ` Stephen Boyd
2015-07-16 16:11 ` Sudeep Holla
2015-07-16 19:31 ` Stephen Boyd
2015-07-17 11:17 ` Sudeep Holla
2015-07-17 18:13 ` Stephen Boyd
2015-07-20 8:54 ` Sudeep Holla
2015-07-21 18:05 ` Stephen Boyd
2015-07-22 14:19 ` Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 4/8] clk: scpi: add support for cpufreq virtual device Sudeep Holla
2015-06-08 10:39 ` [PATCH v4 5/8] cpufreq: arm_big_little: add SCPI interface driver Sudeep Holla
2015-06-08 10:40 ` Sudeep Holla [this message]
2015-06-08 13:51 ` [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno Jon Medhurst (Tixy)
2015-06-08 14:32 ` Sudeep Holla
2015-06-08 14:35 ` Liviu Dudau
2015-07-22 13:28 ` Liviu Dudau
2015-07-22 15:40 ` Sudeep Holla
2015-07-22 16:06 ` Liviu Dudau
2015-07-22 16:16 ` Sudeep Holla
2015-06-08 10:40 ` [PATCH v4 7/8] arm64: dts: add CPU topology " Sudeep Holla
2015-07-22 13:31 ` Liviu Dudau
2015-06-08 10:40 ` [PATCH v4 8/8] arm64: dts: add clock support for all the cpus Sudeep Holla
2015-07-22 13:32 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433760002-24120-7-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=Liviu.Dudau@arm.com \
--cc=arnd@arndb.de \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=olof@lixom.net \
--cc=tixy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®