mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: <linux-arch@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <arnd@arndb.de>, <arc-linux-dev@synopsys.com>,
	Vineet Gupta <Vineet.Gupta1@synopsys.com>
Subject: [PATCH 08/28] ARCv2: MMUv4: support aliasing icache config
Date: Tue, 9 Jun 2015 17:18:08 +0530	[thread overview]
Message-ID: <1433850508-26317-9-git-send-email-vgupta@synopsys.com> (raw)
In-Reply-To: <1433850508-26317-1-git-send-email-vgupta@synopsys.com>

This is also default for AXS103 release

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
 arch/arc/include/asm/cache.h |  4 +---
 arch/arc/mm/cache.c          | 14 +++++++++++++-
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index e54977a7d006..d21c76d6b054 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -60,7 +60,7 @@ extern void read_decode_cache_bcr(void);
 #define ARC_REG_IC_IVIC		0x10
 #define ARC_REG_IC_CTRL		0x11
 #define ARC_REG_IC_IVIL		0x19
-#if defined(CONFIG_ARC_MMU_V3)
+#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4)
 #define ARC_REG_IC_PTAG		0x1E
 #endif
 
@@ -74,9 +74,7 @@ extern void read_decode_cache_bcr(void);
 #define ARC_REG_DC_IVDL		0x4A
 #define ARC_REG_DC_FLSH		0x4B
 #define ARC_REG_DC_FLDL		0x4C
-#if defined(CONFIG_ARC_MMU_V3)
 #define ARC_REG_DC_PTAG		0x5C
-#endif
 
 /* Bit val in DC_CTRL */
 #define DC_CTRL_INV_MODE_FLUSH  0x40
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 7a898f57d84b..0eaaee60fd0b 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -21,6 +21,9 @@
 #include <asm/cachectl.h>
 #include <asm/setup.h>
 
+void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr,
+			       unsigned long sz, const int cacheop);
+
 char *arc_cache_mumbojumbo(int c, char *buf, int len)
 {
 	int n = 0;
@@ -414,7 +417,7 @@ __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
 	unsigned long flags;
 
 	local_irq_save(flags);
-	__cache_line_loop(paddr, vaddr, sz, OP_INV_IC);
+	(*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC);
 	local_irq_restore(flags);
 }
 
@@ -746,6 +749,15 @@ void arc_cache_init(void)
 		if (ic->ver != CONFIG_ARC_MMU_VER)
 			panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
 			      ic->ver, CONFIG_ARC_MMU_VER);
+
+		/*
+		 * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
+		 * pair to provide vaddr/paddr respectively, just as in MMU v3
+		 */
+		if (is_isa_arcv2() && ic->alias)
+			_cache_line_loop_ic_fn = __cache_line_loop_v3;
+		else
+			_cache_line_loop_ic_fn = __cache_line_loop;
 	}
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
-- 
1.9.1


  parent reply	other threads:[~2015-06-09 11:50 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-09 11:48 [PATCH 00/28] ARCv2 port to Linux - (B) ISA / Core / platform support Vineet Gupta
2015-06-09 11:48 ` [PATCH 01/28] ARCv2: [intc] HS38 core interrupt controller Vineet Gupta
2015-06-09 11:48 ` [PATCH 02/28] ARCv2: Support for ARCv2 ISA and HS38x cores Vineet Gupta
2015-06-09 11:48 ` [PATCH 03/28] ARCv2: STAR 9000793984: Handle return from intr to Delay Slot Vineet Gupta
2015-06-09 11:48 ` [PATCH 04/28] ARCv2: STAR 9000808988: signals involving " Vineet Gupta
2015-06-09 11:48 ` [PATCH 05/28] ARCv2: STAR 9000814690: Really Re-enable interrupts to avoid deadlocks Vineet Gupta
2015-06-09 11:48 ` [PATCH 06/28] ARCv2: MMUv4: TLB programming Model changes Vineet Gupta
2015-06-09 11:48 ` [PATCH 07/28] ARCv2: MMUv4: cache programming model changes Vineet Gupta
2015-06-09 11:48 ` Vineet Gupta [this message]
2015-06-09 11:48 ` [PATCH 09/28] ARCv2: optimised string/mem lib routines Vineet Gupta
2015-06-09 11:48 ` [PATCH 10/28] ARCv2: Adhere to Zero Delay loop restriction Vineet Gupta
2015-06-09 11:48 ` [PATCH 11/28] ARCv2: extable: Enable sorting at build time Vineet Gupta
2015-06-24  5:51   ` Vineet Gupta
2015-06-29 20:38     ` David Daney
2015-06-30  4:41       ` Vineet Gupta
2015-06-09 11:48 ` [PATCH 12/28] ARCv2: clocksource: Introduce 64bit local RTC counter Vineet Gupta
2015-06-09 11:48 ` [PATCH 13/28] ARC: make plat_smp_ops weak to allow over-rides Vineet Gupta
2015-06-09 11:48 ` [PATCH 14/28] ARCv2: SMP: ARConnect debug/robustness Vineet Gupta
2015-06-09 11:48 ` [PATCH 15/28] ARCv2: SMP: clocksource: Enable Global Real Time counter Vineet Gupta
2015-06-09 11:48 ` [PATCH 16/28] ARCv2: SMP: intc: IDU 2nd level intc for dynamic IRQ distribution Vineet Gupta
2015-06-09 11:48 ` [PATCH 17/28] ARC: add compiler barrier to LLSC based cmpxchg Vineet Gupta
2015-06-09 12:23   ` Peter Zijlstra
2015-06-09 11:48 ` [PATCH 18/28] ARC: add smp barriers around atomics per memory-barrriers.txt Vineet Gupta
2015-06-09 12:30   ` Peter Zijlstra
2015-06-10  9:17     ` Vineet Gupta
2015-06-10 10:53       ` Peter Zijlstra
2015-06-11 13:03         ` Vineet Gupta
2015-06-12 12:15   ` [PATCH v2] ARC: add smp barriers around atomics per Documentation/atomic_ops.txt Vineet Gupta
2015-06-12 13:04     ` Peter Zijlstra
2015-06-12 13:16       ` Vineet Gupta
2015-06-09 11:48 ` [PATCH 19/28] arch: conditionally define smp_{mb,rmb,wmb} Vineet Gupta
2015-06-09 12:32   ` Peter Zijlstra
2015-06-09 11:48 ` [PATCH 20/28] ARCv2: barriers Vineet Gupta
2015-06-09 12:40   ` Peter Zijlstra
2015-06-10  9:34     ` Vineet Gupta
2015-06-10 10:58       ` Peter Zijlstra
2015-06-10 13:01         ` Will Deacon
2015-06-11 12:13           ` Vineet Gupta
2015-06-11 13:39             ` Will Deacon
2015-06-19 13:13               ` Vineet Gupta
2015-06-22 13:36                 ` Will Deacon
2015-06-23  7:58                   ` [PATCH v2 " Vineet Gupta
2015-06-23  8:49                     ` Will Deacon
2015-06-23  9:03                       ` Vineet Gupta
2015-06-23  9:26                         ` Will Deacon
2015-06-23  9:52                           ` [PATCH v3 22/28] " Vineet Gupta
2015-06-23 16:28                             ` Will Deacon
2015-06-23  9:25                     ` [PATCH v2 20/28] " Peter Zijlstra
2015-06-23  8:02                   ` [PATCH " Vineet Gupta
2015-06-09 11:48 ` [PATCH 21/28] ARC: Reduce bitops lines of code using macros Vineet Gupta
2015-06-12 12:20   ` [PATCH v2] " Vineet Gupta
2015-06-12 13:05     ` Peter Zijlstra
2015-06-09 11:48 ` [PATCH 22/28] ARCv2: STAR 9000837815 workaround hardware exclusive transactions livelock Vineet Gupta
2015-06-09 12:35   ` Peter Zijlstra
2015-06-10 10:01     ` Vineet Gupta
2015-06-10 11:02       ` Peter Zijlstra
2015-06-19  9:55         ` [PATCH v2 " Vineet Gupta
2015-06-19  9:59           ` Will Deacon
2015-06-19 10:09             ` Vineet Gupta
2015-06-23  7:59             ` Vineet Gupta
2015-06-09 11:48 ` [PATCH 23/28] ARCv2: SLC: Handle explcit flush for DMA ops (w/o IO-coherency) Vineet Gupta
2015-06-09 11:48 ` [PATCH 24/28] ARCv2: All bits in place, allow ARCv2 builds Vineet Gupta
2015-06-09 11:48 ` [PATCH 25/28] ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores Vineet Gupta
2015-06-09 11:48 ` [PATCH 26/28] ARC: [axs101] Prepare for AXS103 Vineet Gupta
2015-06-09 11:48 ` [PATCH 27/28] ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores Vineet Gupta
2015-06-09 11:48 ` [PATCH 28/28] ARCv2: [vdk] dts files and defconfig for HS38 VDK Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433850508-26317-9-git-send-email-vgupta@synopsys.com \
    --to=vineet.gupta1@synopsys.com \
    --cc=arc-linux-dev@synopsys.com \
    --cc=arnd@arndb.de \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome