From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754193AbbFOKXT (ORCPT <rfc822;w@1wt.eu>);
	Mon, 15 Jun 2015 06:23:19 -0400
Received: from nasmtp01.atmel.com ([192.199.1.246]:56772 "EHLO
	DVREDG02.corp.atmel.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org
	with ESMTP id S1754025AbbFOKXM (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Mon, 15 Jun 2015 06:23:12 -0400
From: Josh Wu <josh.wu@atmel.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
        <linux-arm-kernel@lists.infradead.org>
CC: Josh Wu <josh.wu@atmel.com>, Russell King <linux@arm.linux.org.uk>,
        "Kumar Gala" <galak@codeaurora.org>,
        Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
        <linux-kernel@vger.kernel.org>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Alexandre Belloni <alexandre.belloni@free-electrons.com>,
        <devicetree@vger.kernel.org>, "Rob Herring" <robh+dt@kernel.org>,
        Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH 1/2] ARM: at91: dts: add isi & ov2640 dt nodes for at91sam9m10g45ek board
Date: Mon, 15 Jun 2015 18:27:17 +0800
Message-ID: <1434364038-8117-1-git-send-email-josh.wu@atmel.com>
X-Mailer: git-send-email 1.9.1
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Add the link for atmel-isi and ov2640 sensor node.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

 arch/arm/boot/dts/at91sam9g45.dtsi     |  4 +++
 arch/arm/boot/dts/at91sam9m10g45ek.dts | 45 ++++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index d260ba7..e707613 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1070,6 +1070,10 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isi>;
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			pwm0: pwm@fffb8000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1375d33..5062e18 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -63,6 +63,25 @@
 
 			i2c0: i2c@fff84000 {
 				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
 			};
 
 			i2c1: i2c@fff88000 {
@@ -101,6 +120,22 @@
 			};
 
 			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
@@ -155,6 +190,16 @@
 				status = "okay";
 			};
 
+			isi@fffb4000 {
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+					};
+				};
+			};
+
 			pwm0: pwm@fffb8000 {
 				status = "okay";
 
-- 
1.9.1