mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Scott Shu <scott.shu@mediatek.com>
To: <yingjoe.chen@mediatek.com>
Cc: <srv_wsdupstream@mediatek.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
	<matthias.bgg@gmail.com>, <linux@arm.linux.org.uk>,
	<rchintakuntla@cavium.com>, Scott Shu <scott.shu@mediatek.com>
Subject: [PATCH 3/6] ARM: mediatek: add smp bringup code for MT6580
Date: Thu, 18 Jun 2015 11:35:21 +0800	[thread overview]
Message-ID: <1434598524-43846-4-git-send-email-scott.shu@mediatek.com> (raw)
In-Reply-To: <1434598524-43846-1-git-send-email-scott.shu@mediatek.com>

Add support for cpu enable-method "mediatek,mt6580-smp" for booting
secondary CPUs on MT6580.
---
 arch/arm/mach-mediatek/platsmp.c | 107 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 12fefb3..2985913 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -21,10 +21,15 @@
 #include <linux/of_address.h>
 #include <linux/string.h>
 #include <linux/threads.h>
+#include <linux/delay.h>
+#include <asm/cacheflush.h>
+#include "generic.h"
 
 #define MTK_MAX_CPU		8
 #define MTK_SMP_REG_SIZE	0x1000
 
+static DEFINE_SPINLOCK(boot_lock);
+
 struct mtk_smp_boot_info {
 	unsigned long smp_base;
 	unsigned int jump_reg;
@@ -57,6 +62,101 @@ static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
 static void __iomem *mtk_smp_base;
 static const struct mtk_smp_boot_info *mtk_smp_info;
 
+static void __cpuinit write_pen_release(int val)
+{
+	pen_release = val;
+	/* Make sure this is visible to other CPUs */
+	smp_wmb();
+	sync_cache_w(&pen_release);
+}
+
+static int mt6580_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	write_pen_release(cpu);
+
+	/*
+	 * CPU power on control by SPM
+	 */
+	spm_cpu_mtcmos_on(cpu);
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		/* Read barrier */
+		smp_rmb();
+
+		if (pen_release == -1)
+			break;
+
+		usleep_range(10, 1000);
+	}
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return (pen_release != -1 ? -EINVAL : 0);
+}
+
+static void mt6580_secondary_init(unsigned int cpu)
+{
+	/*
+	 * Let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+#define MT6580_INFRACFG_AO	0x10001000
+#define SW_ROM_PD		BIT(31)
+
+static void __init mt6580_smp_prepare_cpus(unsigned int max_cpus)
+{
+	static void __iomem *infracfg_ao_base;
+
+	infracfg_ao_base = ioremap(MT6580_INFRACFG_AO, 0x1000);
+
+	if (!infracfg_ao_base)
+		pr_err("%s: Unable to map I/O memory\n", __func__);
+
+	/* Enable bootrom power down mode */
+	writel_relaxed(readl(infracfg_ao_base + 0x804) | SW_ROM_PD,
+		       infracfg_ao_base + 0x804);
+
+	/* Write the address of slave startup into boot address
+	   register for bootrom power down mode */
+	writel_relaxed(virt_to_phys(secondary_startup_arm),
+		       infracfg_ao_base + 0x800);
+
+	iounmap(infracfg_ao_base);
+
+	/* Initial spm cpu mtcmos memory map */
+	spm_cpu_mtcmos_init();
+}
+
 static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (!mtk_smp_base)
@@ -143,3 +243,10 @@ static struct smp_operations mt65xx_smp_ops __initdata = {
 	.smp_boot_secondary = mtk_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(mt65xx_smp, "mediatek,mt65xx-smp", &mt65xx_smp_ops);
+
+static struct smp_operations mt6580_smp_ops __initdata = {
+	.smp_prepare_cpus = mt6580_smp_prepare_cpus,
+	.smp_secondary_init = mt6580_secondary_init,
+	.smp_boot_secondary = mt6580_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt6580_smp, "mediatek,mt6580-smp", &mt6580_smp_ops);
-- 
1.8.1.1.dirty


  parent reply	other threads:[~2015-06-18  3:36 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Scott Shu <srv_scott.shu@mediatek.com>
2015-06-18  3:35 ` [PATCH 0/6] This series adds SMP support for the MediaTek MT6580 Scott Shu
2015-06-18  3:35   ` [PATCH 1/6] Document: bindings: DT: Add SMP enable method for MT6580 SoC platform Scott Shu
2015-06-18  3:35   ` [PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver Scott Shu
2015-06-18  3:35   ` Scott Shu [this message]
2015-06-18  3:35   ` [PATCH 4/6] ARM: Mediatek: enable GPT6 on boot up to make arch timer working for MT6580 Scott Shu
2015-06-18  3:35   ` [PATCH 5/6] ARM: dts: mt6580: Add device nodes to the MT6580 dtsi file Scott Shu
2015-06-18  3:35   ` [PATCH 6/6] ARM: dts: mt6580: enable basic SMP bringup for mt6580 Scott Shu
2015-06-18 18:01 ` [RESEND PATCH 0/6] This series adds SMP support for the MediaTek MT6580 Scott Shu
2015-06-18 18:01   ` [RESEND PATCH 1/6] Document: bindings: DT: Add SMP enable method for MT6580 SoC platform Scott Shu
2015-06-29  3:03     ` Yingjoe Chen
2015-07-11 10:38       ` Yingjoe Chen
2015-07-17 22:04         ` Matthias Brugger
2015-06-18 18:01   ` [RESEND PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver Scott Shu
2015-06-23  5:53     ` Sascha Hauer
2015-07-03  5:58       ` Scott Shu
2015-07-24  2:02       ` Scott Shu
2015-07-24  5:50         ` Sascha Hauer
2015-07-25  9:13           ` Scott Shu
2015-07-27 10:22             ` Matthias Brugger
2015-06-18 18:01   ` [RESEND PATCH 3/6] ARM: mediatek: add smp bringup code for MT6580 Scott Shu
2015-06-18 18:01   ` [RESEND PATCH 4/6] ARM: Mediatek: enable GPT6 on boot up to make arch timer working " Scott Shu
2015-06-18 18:01   ` [RESEND PATCH 5/6] ARM: dts: mt6580: Add device nodes to the MT6580 dtsi file Scott Shu
2015-06-18 18:01   ` [RESEND PATCH 6/6] ARM: dts: mt6580: enable basic SMP bringup for mt6580 Scott Shu
2015-06-18 18:23   ` [RESEND PATCH 0/6] This series adds SMP support for the MediaTek MT6580 Alexey Klimov
2015-07-24 12:59   ` Matthias Brugger
2015-07-24 13:10     ` Scott Shu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434598524-43846-4-git-send-email-scott.shu@mediatek.com \
    --to=scott.shu@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=rchintakuntla@cavium.com \
    --cc=robh+dt@kernel.org \
    --cc=srv_wsdupstream@mediatek.com \
    --cc=yingjoe.chen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®