Linux version 2.4.20-pre11aa1 (bernd@sam.at.home) (gcc version 3.2 20021021 (Red Hat Linux 8.0 3.2-11)) #2 Sun Oct 27 23:33:49 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000004010000 (usable) BIOS-e820: 0000000004010000 - 0000000004020000 (ACPI data) BIOS-e820: 0000000004020000 - 0000000004040000 (reserved) BIOS-e820: 00000000fef80000 - 00000000ff000000 (reserved) BIOS-e820: 00000000fffe0000 - 00000000fffe6e00 (reserved) BIOS-e820: 00000000fffe6e00 - 00000000fffe7000 (ACPI NVS) BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved) 64MB LOWMEM available. On node 0 totalpages: 16400 zone(0): 4096 pages. zone(1): 12304 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=x ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.20pre11aa1 No local APIC present or hardware disabled Initializing CPU#0 Detected 333.276 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 665.19 BogoMIPS Memory: 62872k/65600k available (906k kernel code, 2340k reserved, 365k data, 84k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfd82b, last bus=21 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). aio_setup: num_physpages = 4100 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured Toshiba System Managment Mode driver v1.11 26/9/2001 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 80, VID=1179, DID=0102 PCI_IDE: chipset revision 52 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio hda: TOSHIBA MK4309MAT, ATA DISK drive hdc: CD-224E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c028b5e4, I/O limit 4095Mb (mask 0xffffffff) hda: 8452080 sectors (4327 MB), CHS=526/255/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 es1371: version v0.30 time 23:39:36 Oct 27 2002 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 84k freed Real Time Clock Driver v1.10e Adding Swap: 136544k swap-space (priority -1) hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hdc: DMA disabled inserting floppy driver for 2.4.20-pre11aa1 Floppy drive(s): fd0 is 1.44M DOR0=4 floppy interrupt on bizarre fdc 2 handler=00000000 FDC 0 is an 8272A parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Intel PCIC probe: not found. PCI: Enabling device 00:13.0 (0000 -> 0002) PCI: Enabling device 00:13.1 (0000 -> 0002) Yenta IRQ list 06b8, PCI irq11 Socket status: 30000007 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000007 cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean.