From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Mathias Nyman <mathias.nyman@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Felipe Balbi <balbi@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Roger Quadros <rogerq@ti.com>, <linux-usb@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 8 Jul 2015 17:41:07 +0800 [thread overview]
Message-ID: <1436348468-4126-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..cb63dc3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pwrap {
@@ -211,3 +221,8 @@
&uart0 {
status = "okay";
};
+
+&usb {
+ reg-vusb33-supply = <&mt6397_vusb_reg>;
+ reg-vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..452bd0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/power/mt8173-power.h>
#include "mt8173-pinfunc.h"
/ {
@@ -393,6 +394,32 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb: usb30@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ usb-phy = <&u3phy>;
+ usb3-lpm-capable;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_mac";
+ };
+
+ u3phy: usb-phy@11271000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11271000 0 0x3000>,
+ <0 0x11280000 0 0x20000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ usb-wakeup-ctrl = <&pericfg>;
+ wakeup-src = <1>;
+ u2port-num = <2>;
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>,
+ <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "wakeup_deb_p0",
+ "wakeup_deb_p1",
+ "u3phya_ref";
+ };
};
};
--
1.8.1.1.dirty
next prev parent reply other threads:[~2015-07-08 9:42 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 9:41 [PATCH v2 0/5] Mediatek xHCI support Chunfeng Yun
2015-07-08 9:41 ` [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-10 5:10 ` Sascha Hauer
2015-07-14 6:19 ` chunfeng yun
2015-07-14 7:45 ` Sascha Hauer
2015-07-15 12:33 ` chunfeng yun
2015-07-08 9:41 ` [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-10 8:31 ` Roger Quadros
2015-07-14 2:36 ` chunfeng yun
2015-07-14 2:50 ` chunfeng yun
2015-07-20 14:24 ` chunfeng yun
2015-07-08 9:41 ` [PATCH v2 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-07-10 6:42 ` Sascha Hauer
2015-07-20 15:41 ` chunfeng yun
2015-07-08 9:41 ` [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-13 14:52 ` John Crispin
2015-07-20 14:51 ` chunfeng yun
2015-07-08 9:41 ` Chunfeng Yun [this message]
2015-07-14 10:12 ` [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Daniel Kurtz
2015-07-20 14:39 ` chunfeng yun
2015-07-20 14:51 ` Yingjoe Chen
2015-07-20 14:59 ` Daniel Kurtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436348468-4126-6-git-send-email-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®