From: Roger Quadros <rogerq@ti.com>
To: <balbi@ti.com>
Cc: <tony@atomide.com>, <Joao.Pinto@synopsys.com>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 4/9] usb: dwc3: core: Adapt to named interrupts
Date: Wed, 8 Jul 2015 13:36:35 +0300 [thread overview]
Message-ID: <1436351795-28556-1-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1436351524-28385-1-git-send-email-rogerq@ti.com>
From: Felipe Balbi <balbi@ti.com>
Add support to use interrupt names,
Following are the interrupt names
Peripheral Interrupt - peripheral
HOST Interrupt - host
OTG Interrupt - otg
[Roger Q]
- If any of these are missing we use the
first available IRQ resource so that we don't
break with older DTBs.
- Use gadget_irq in gadget driver.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/dwc3/core.c | 12 ++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
drivers/usb/dwc3/gadget.c | 2 +-
3 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a7498e0..7b33d7b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -941,6 +941,18 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->xhci_resources[1].flags = res->flags;
dwc->xhci_resources[1].name = res->name;
+ dwc->otg_irq = platform_get_irq_byname(pdev, "otg");
+ if (!dwc->otg_irq)
+ dwc->otg_irq = res->start;
+
+ dwc->gadget_irq = platform_get_irq_byname(pdev, "peripheral");
+ if (!dwc->gadget_irq)
+ dwc->gadget_irq = res->start;
+
+ dwc->xhci_irq = platform_get_irq_byname(pdev, "host");
+ if (!dwc->xhci_irq)
+ dwc->xhci_irq = res->start;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 9c1c094..c3431b2 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -742,6 +742,9 @@ struct dwc3_scratchpad_array {
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
+ * @xhci_irq: IRQ number for XHCI IRQs
+ * @gadget_irq: IRQ number for Peripheral IRQs
+ * @otg_irq: IRQ number for OTG IRQs
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
@@ -846,6 +849,10 @@ struct dwc3 {
enum usb_dr_mode dr_mode;
+ int gadget_irq;
+ int xhci_irq;
+ int otg_irq;
+
/* used for suspend/resume */
u32 dcfg;
u32 gctl;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 333a7c0..cf6b945 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1531,7 +1531,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
int irq;
u32 reg;
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+ irq = dwc->gadget_irq;
ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
IRQF_SHARED, "dwc3", dwc);
if (ret) {
--
2.1.4
next prev parent reply other threads:[~2015-07-08 10:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 10:31 [PATCH v3 0/9] usb: dwc3: add dual-role support Roger Quadros
2015-07-08 10:31 ` [PATCH v3 1/9] " Roger Quadros
2015-07-08 10:31 ` [PATCH v3 2/9] usb: dwc3: core.h: add some register definitions Roger Quadros
2015-07-08 10:36 ` [PATCH v3 3/9] usb: dwc3: dwc3-omap: Make the wrapper interrupt shared Roger Quadros
2015-07-08 10:36 ` Roger Quadros [this message]
2015-07-08 13:06 ` [PATCH v3 4/9] usb: dwc3: core: Adapt to named interrupts Sergei Shtylyov
2015-07-08 14:43 ` Roger Quadros
2015-07-08 10:36 ` [PATCH v3 5/9] usb: dwc3: core: make dual-role work with OTG irq Roger Quadros
2015-07-08 10:36 ` [PATCH v3 6/9] usb: dwc3: save/restore OTG registers during suspend/resume Roger Quadros
2015-07-08 10:37 ` [PATCH v3 7/9] usb: dwc3: gadget: Fix suspend/resume during dual-role mode Roger Quadros
2015-07-08 10:37 ` [PATCH v3 8/9] usb: dwc3: core: Prevent otg events from disabling themselves Roger Quadros
2015-07-08 10:37 ` [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros
2015-07-08 13:11 ` Sergei Shtylyov
2015-07-08 14:44 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436351795-28556-1-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=Joao.Pinto@synopsys.com \
--cc=balbi@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®