[PATCH v3 3/3] ARM: dts: dra7: Add scm_conf1 node and remove redundant nodes

[Roger Quadros <rogerq@ti.com>]

scm_conf1 maps the control register address space after the
padconf till the end.

Fix the scm_conf and pmx_core resource lengths. We need to add
4 bytes to include the last 32-bit register space.

Remove the redundant dra7_ctrl_core and dra7_ctrl_general nodes.
They are not used by anyone and no longer needed as they are
covered by scm_conf and scm_conf1.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 4a0718c..d07c34c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -141,7 +141,7 @@
 				dra7_pmx_core: pinmux@1400 {
 					compatible = "ti,dra7-padconf",
 						     "pinctrl-single";
-					reg = <0x1400 0x0464>;
+					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#interrupt-cells = <1>;
@@ -149,6 +149,13 @@
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x3fffffff>;
 				};
+
+				scm_conf1: scm_conf@1 {
+					compatible = "syscon";
+					reg = <0x1868 0x03e0>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -286,16 +293,6 @@
 				#thermal-sensor-cells = <1>;
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
-- 
2.1.4