From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754394AbbGXNQe (ORCPT ); Fri, 24 Jul 2015 09:16:34 -0400 Received: from mail.kmu-office.ch ([178.209.48.109]:51111 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753568AbbGXNQa (ORCPT ); Fri, 24 Jul 2015 09:16:30 -0400 From: Stefan Agner To: dwmw2@infradead.org, computersforpeace@gmail.com Cc: sebastian@breakpoint.cc, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, shawn.guo@linaro.org, kernel@pengutronix.de, boris.brezillon@free-electrons.com, marb@ixxat.de, aaron@tastycactus.com, bpringlemeir@gmail.com, linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Agner Subject: [PATCH v7 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610 Date: Fri, 24 Jul 2015 15:16:19 +0200 Message-Id: <1437743784-30163-1-git-send-email-stefan@agner.ch> X-Mailer: git-send-email 2.4.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This seventh revision simplifies the config symbols somewhat, but is otherwise just a rebase version on current l2-mtd/master. I reran the MTD tests, they still all succeed. Some more information and the full test log can be found in the cover letter of the last revision v6: http://thread.gmane.org/gmane.linux.kernel/1979868 Changes since v6: - Rebased ontop of l2-mtd/master (v4.2-rc1 based) - Removed HAVE_NAND_VF610_NFC and use depends on. This made "[PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller" unnecessary Changes since v5: - Removed fsl,mpc5125-nfc compatible string - Removed readl/writel_relaxed - Change interface of vf610_nfc_transfer_size to match other accessors Changes since v4: - Rebased ontop of l2-mtd/master (v4.1-rc4 based) - Eliminate unnecessary page read (NAND_CMD_SEQIN) since the driver does not support sub-page writes anyway (improves write performance) - Support ONFI by enabling READID command with offset and parameter page reads (CMD_PARAM) - Change to dedicated read_page/write_page function, enables raw writes - Use __LITTLE_ENDIAN to distingush between LE/BE relevant statements - Eliminated vf610_nfc_probe_dt in favor of common DT init code - Use wait_for_completion_timeout - Some style fixes (spaces, etc.) Changes since v3: - Make the driver selectable when COMPILE_TEST is set - Fix compile error due to superfluous ECC_STATUS configuration in initial patch (without ECC correction ECC_STATUS does not need to be configured) - Remove custom BBT pattern and switch to in-band BBT in the initial patch - Include two bug fixes, for details see the corresponding U-Boot patches: http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/215802 Changes since v2: - Updated binding documentation Changes since v1: - Nest nfc_config struct within the main nfc struct - Use assigned clock binding to specify NFC clock - Rebased ontop of MSCM IR patchset (driver parts have been merged) - Split out arch Kconfig in a separate config - Fix module license - Updated MAINTAINERS Changes since RFC (Bill Pringlemeir): - Renamed driver from fsl_nfc to vf610_nfc - Use readl/writel for all register in accessor functions - Optimized field accessor functions - Implemented PM (suspend/resume) functions - Implemented basic support for ECC strength/ECC step size from dt - Improved performance of count_written_bits by using hweight32 - Support ECC with 60-bytes to correct up to 32 bit errors - Changed to in-band BBT (NAND_BBT_NO_OOB) which also allows ECC modes which uses up to 60 bytes on 64 byte OOB - Removed custom (downstream) BBT pattern since BBT table won't be compatible anyway (due to the change above) Stefan Agner (5): mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others mtd: nand: vf610_nfc: add hardware BCH-ECC support mtd: nand: vf610_nfc: add device tree bindings ARM: dts: vf610twr: add NAND flash controller peripherial ARM: dts: vf-colibri: enable NAND flash controller .../devicetree/bindings/mtd/vf610-nfc.txt | 45 ++ MAINTAINERS | 6 + arch/arm/boot/dts/vf-colibri.dtsi | 32 + arch/arm/boot/dts/vf610-twr.dts | 44 ++ arch/arm/boot/dts/vfxxx.dtsi | 8 + drivers/mtd/nand/Kconfig | 11 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/vf610_nfc.c | 839 +++++++++++++++++++++ 8 files changed, 986 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/vf610-nfc.txt create mode 100644 drivers/mtd/nand/vf610_nfc.c -- 2.4.5