From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753520AbbG0MpG (ORCPT ); Mon, 27 Jul 2015 08:45:06 -0400 Received: from down.free-electrons.com ([37.187.137.238]:53198 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751308AbbG0MpD (ORCPT ); Mon, 27 Jul 2015 08:45:03 -0400 From: Maxime Ripard To: Linus Walleij Cc: Hans de Goede , Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Maxime Ripard Subject: [PATCH v2 1/2] pinctrl: sunxi: Add custom irq_domain_ops Date: Mon, 27 Jul 2015 14:41:57 +0200 Message-Id: <1438000918-9026-2-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.4.6 In-Reply-To: <1438000918-9026-1-git-send-email-maxime.ripard@free-electrons.com> References: <1438000918-9026-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The current interrupt parsing code was working by accident, because the default was actually parsing the first node of interrupts. While that was mostly working (and the flags were actually ignored), this binding has never been documented, and doesn't work with SoCs that have multiple interrupt banks anyway. Add a proper interrupt xlate function, that uses the same description than the GPIOs ( ), that will make things less confusing. The EINT number will still be used as the hwirq number, but won't be exposed through the DT. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede --- .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 37 +++++++++++++++++++++- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 35 ++++++++++++++++++-- 2 files changed, 69 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 9462ab7ddd1f..3c821cda1ad0 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -48,7 +48,7 @@ Optional subnode-properties: Examples: -pinctrl@01c20800 { +pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; @@ -68,3 +68,38 @@ pinctrl@01c20800 { allwinner,pull = <0>; }; }; + + +GPIO and interrupt controller +----------------------------- + +This hardware also acts as a GPIO controller and an interrupt +controller. + +Consumers that would want to refer to one or the other (or both) +should provide through the usual *-gpios and interrupts properties a +cell with 3 arguments, first the number of the bank, then the pin +inside that bank, and finally the flags for the GPIO/interrupts. + +Example: + +xio: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&pio>; + interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; +}; diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index 7f7e7bb4f22c..fb4669c0ce0e 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -711,6 +711,37 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = { IRQCHIP_EOI_IF_HANDLED, }; +static int sunxi_pinctrl_irq_of_xlate(struct irq_domain *d, + struct device_node *node, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + struct sunxi_desc_function *desc; + int pin, base; + + if (intsize < 3) + return -EINVAL; + + base = PINS_PER_BANK * intspec[0]; + pin = base + intspec[1]; + + desc = sunxi_pinctrl_desc_find_function_by_pin(d->host_data, + pin, "irq"); + if (!desc) + return -EINVAL; + + *out_hwirq = desc->irqbank * PINS_PER_BANK + desc->irqnum; + *out_type = intspec[2]; + + return 0; +} + +static struct irq_domain_ops sunxi_pinctrl_irq_domain_ops = { + .xlate = sunxi_pinctrl_irq_of_xlate, +}; + static void sunxi_pinctrl_irq_handler(unsigned __irq, struct irq_desc *desc) { unsigned int irq = irq_desc_get_irq(desc); @@ -986,8 +1017,8 @@ int sunxi_pinctrl_init(struct platform_device *pdev, pctl->domain = irq_domain_add_linear(node, pctl->desc->irq_banks * IRQ_PER_BANK, - &irq_domain_simple_ops, - NULL); + &sunxi_pinctrl_irq_domain_ops, + pctl); if (!pctl->domain) { dev_err(&pdev->dev, "Couldn't register IRQ domain\n"); ret = -ENOMEM; -- 2.4.6