From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752726AbbGaJmn (ORCPT ); Fri, 31 Jul 2015 05:42:43 -0400 Received: from down.free-electrons.com ([37.187.137.238]:33735 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751974AbbGaJkT (ORCPT ); Fri, 31 Jul 2015 05:40:19 -0400 From: Alexandre Belloni To: Nicolas Ferre Cc: Boris Brezillon , Maxime Ripard , Jean-Christophe Plagniol-Villard , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni Subject: [PATCH 12/23] ARM: at91/dt: at91sam9x5: use slow clock where necessary Date: Fri, 31 Jul 2015 11:39:48 +0200 Message-Id: <1438335599-3301-13-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary, The LCD PWM will be handled later. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9x5.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index b6c8df8d380e..1709a071c5ae 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -376,11 +376,13 @@ rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; }; shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffe30 { @@ -418,16 +420,16 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, ; + clock-names = "t0_clk", "slow_clk"; }; dma0: dma-controller@ffffec00 { @@ -1173,6 +1175,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1183,6 +1186,7 @@ compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; -- 2.1.4