From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753223AbbGaJq4 (ORCPT ); Fri, 31 Jul 2015 05:46:56 -0400 Received: from down.free-electrons.com ([37.187.137.238]:33688 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751451AbbGaJkI (ORCPT ); Fri, 31 Jul 2015 05:40:08 -0400 From: Alexandre Belloni To: Nicolas Ferre Cc: Boris Brezillon , Maxime Ripard , Jean-Christophe Plagniol-Villard , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni Subject: [PATCH 07/23] ARM: at91/dt: at91sam9261: use slow clock where necessary Date: Fri, 31 Jul 2015 11:39:43 +0200 Message-Id: <1438335599-3301-8-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The watchdog, the reset controller, the real-time timer, the shutdown controller and the timer counter need the slow clock, add it where necessary. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9261.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index b2c44a07a3d0..ce1e3e94a40c 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -119,8 +119,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>, <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; usb1: gadget@fffa4000 { @@ -820,11 +820,13 @@ rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&slow_xtal>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&slow_xtal>; }; pit: timer@fffffd30 { @@ -846,6 +848,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; status = "disabled"; }; -- 2.1.4