mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: arm@kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Olof Johansson <olof@lixom.net>,
	Kevin Hilman <khilman@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Liviu Dudau <liviu.dudau@arm.com>,
	Punit Agrawal <punit.agrawal@arm.com>,
	"Jon Medhurst (Tixy)" <tixy@linaro.org>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH v6 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno
Date: Fri, 31 Jul 2015 18:43:09 +0100	[thread overview]
Message-ID: <1438364591-1144-7-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1438364591-1144-1-git-send-email-sudeep.holla@arm.com>

This patch adds support for the MHU mailbox peripheral used on Juno by
application processors to communicate with remote SCP handling most of
the CPU/system power management. It also adds the SRAM reserving the
shared memory and SCPI message protocol using that shared memory.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 54 ++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index e3ee96036eca..c624208edef6 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -17,6 +17,18 @@
 		};
 	};
 
+	mailbox: mhu@2b1f0000 {
+		compatible = "arm,mhu", "arm,primecell";
+		reg = <0x0 0x2b1f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mhu_lpri_rx",
+				  "mhu_hpri_rx";
+		#mbox-cells = <1>;
+		clocks = <&soc_refclk100mhz>;
+		clock-names = "apb_pclk";
+	};
+
 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		reg = <0x0 0x2c010000 0 0x1000>,
@@ -44,6 +56,48 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	sram: sram@2e000000 {
+		compatible = "arm,juno-sram-ns", "mmio-sram";
+		reg = <0x0 0x2e000000 0x0 0x8000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2e000000 0x8000>;
+
+		cpu_scp_lpri: scp-shmem@0 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x0 0x200>;
+		};
+
+		cpu_scp_hpri: scp-shmem@200 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x200 0x200>;
+		};
+	};
+
+	scpi {
+		compatible = "arm,scpi";
+		mboxes = <&mailbox 1>;
+		shmem = <&cpu_scp_hpri>;
+
+		clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>, <1>, <2>;
+				clock-output-names = "atlclk", "aplclk","gpuclk";
+			};
+			scpi_clk: scpi_clocks@3 {
+				compatible = "arm,scpi-variable-clocks";
+				#clock-cells = <1>;
+				clock-indices = <3>, <4>;
+				clock-output-names = "pxlclk0", "pxlclk1";
+			};
+		};
+	};
+
 	/include/ "juno-clocks.dtsi"
 
 	dma@7ff00000 {
-- 
1.9.1


  parent reply	other threads:[~2015-07-31 17:44 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-31 17:43 [PATCH v6 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 2/8] firmware: add support " Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 3/8] clk: add support for clocks provided by SCP(System Control Processor) Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 4/8] clk: scpi: add support for cpufreq virtual device Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 5/8] cpufreq: arm_big_little: add SCPI interface driver Sudeep Holla
2015-07-31 17:43 ` Sudeep Holla [this message]
2015-08-03 11:23   ` [PATCH v6 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno Liviu Dudau
2015-08-03 11:44     ` Sudeep Holla
2015-08-03 12:47       ` Liviu Dudau
2015-08-03 11:46     ` Jon Medhurst (Tixy)
2015-08-03 12:43       ` Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 7/8] arm64: dts: add CPU topology " Sudeep Holla
2015-07-31 17:43 ` [PATCH v6 8/8] arm64: dts: add clock support for all the cpus Sudeep Holla
2015-08-03 10:18 ` [PATCH v6 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support Liviu Dudau
2015-08-03 10:48   ` Sudeep Holla
2015-08-05  9:59 ` Sudeep Holla
2015-08-06  8:42   ` Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438364591-1144-7-git-send-email-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=Lorenzo.Pieralisi@arm.com \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liviu.dudau@arm.com \
    --cc=olof@lixom.net \
    --cc=punit.agrawal@arm.com \
    --cc=tixy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®