mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rabin Vincent <rabin@rab.in>
To: jesper.nilsson@axis.com
Cc: linux-kernel@vger.kernel.org, linux-cris-kernel@axis.com,
	Rabin Vincent <rabin@rab.in>
Subject: [PATCH 4/6] CRIS v32: add ARTPEC-3 and P1343 device trees
Date: Mon,  3 Aug 2015 20:19:22 +0200	[thread overview]
Message-ID: <1438625964-22335-4-git-send-email-rabin@rab.in> (raw)
In-Reply-To: <1438625964-22335-1-git-send-email-rabin@rab.in>

Add a device tree for the Axis P1343 with the ARTPEC-3 SoC and on-board
LEDs and RTC.

Signed-off-by: Rabin Vincent <rabin@rab.in>
---
 arch/cris/boot/dts/artpec3.dtsi | 46 +++++++++++++++++++++++++
 arch/cris/boot/dts/p1343.dts    | 76 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+)
 create mode 100644 arch/cris/boot/dts/artpec3.dtsi
 create mode 100644 arch/cris/boot/dts/p1343.dts

diff --git a/arch/cris/boot/dts/artpec3.dtsi b/arch/cris/boot/dts/artpec3.dtsi
new file mode 100644
index 0000000..be15be6
--- /dev/null
+++ b/arch/cris/boot/dts/artpec3.dtsi
@@ -0,0 +1,46 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "axis,crisv32";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "artpec3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "axis,crisv32-intc";
+			reg = <0xb002a000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio: gpio@b0020000 {
+			compatible = "axis,artpec3-gio";
+			reg = <0xb0020000 0x1000>;
+			interrupts = <61>;
+			gpio-controller;
+			#gpio-cells = <3>;
+		};
+
+		serial@b003e000 {
+			compatible = "axis,etraxfs-uart";
+			reg = <0xb003e000 0x1000>;
+			interrupts = <64>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/cris/boot/dts/p1343.dts b/arch/cris/boot/dts/p1343.dts
new file mode 100644
index 0000000..fab7bdb
--- /dev/null
+++ b/arch/cris/boot/dts/p1343.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/include/ "artpec3.dtsi"
+
+/ {
+	model = "Axis P1343 Network Camera";
+	compatible = "axis,p1343";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		uart0: serial@b003e000 {
+			status = "okay";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "status:green";
+			gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		status_red {
+			label = "status:red";
+			gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_green {
+			label = "network:green";
+			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_red {
+			label = "network:red";
+			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		power_red {
+			label = "power:red";
+			gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		activity-button@0 {
+			label = "Activity Button";
+			linux,code = <KEY_FN>;
+			gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
+		};
+	};
+};
-- 
2.1.4


  parent reply	other threads:[~2015-08-03 18:19 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-03 18:19 [PATCH 1/6] CRIS v32: increase NR_IRQS Rabin Vincent
2015-08-03 18:19 ` [PATCH 2/6] CRIS: add dt-bindings symlink Rabin Vincent
2015-10-01 19:51   ` Jesper Nilsson
2015-08-03 18:19 ` [PATCH 3/6] CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor Rabin Vincent
2015-10-01 19:52   ` Jesper Nilsson
2015-08-03 18:19 ` Rabin Vincent [this message]
2015-10-01 19:53   ` [PATCH 4/6] CRIS v32: add ARTPEC-3 and P1343 device trees Jesper Nilsson
2015-08-03 18:19 ` [PATCH 5/6] CRIS v32: remove I2C bitbanging driver Rabin Vincent
2015-10-01 19:53   ` Jesper Nilsson
2015-08-03 18:19 ` [PATCH 6/6] CRIS v32: remove old GPIO and LEDs code Rabin Vincent
2015-10-01 19:53   ` Jesper Nilsson
2015-10-01 19:51 ` [PATCH 1/6] CRIS v32: increase NR_IRQS Jesper Nilsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438625964-22335-4-git-send-email-rabin@rab.in \
    --to=rabin@rab.in \
    --cc=jesper.nilsson@axis.com \
    --cc=linux-cris-kernel@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®