[PATCH 1/2] x86/lguest: clean up lguest_setup_irq.

[Rusty Russell <rusty@rustcorp.com.au>]

We make it static and hoist it higher in the file for the next patch.
We also give a nice panic if it fails during boot.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/lguest/boot.c | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 433e5a7dd37f..f38b7e8a88d2 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -835,6 +835,26 @@ static struct irq_chip lguest_irq_controller = {
 	.irq_unmask	= enable_lguest_irq,
 };
 
+/*
+ * Interrupt descriptors are allocated as-needed, but low-numbered ones are
+ * reserved by the generic x86 code.  So we ignore irq_alloc_desc_at if it
+ * tells us the irq is already used: other errors (ie. ENOMEM) we take
+ * seriously.
+ */
+static int lguest_setup_irq(unsigned int irq)
+{
+	int err;
+
+	/* Returns -ve error or vector number. */
+	err = irq_alloc_desc_at(irq, 0);
+	if (err < 0 && err != -EEXIST)
+		return err;
+
+	irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
+				      handle_level_irq, "level");
+	return 0;
+}
+
 static int lguest_enable_irq(struct pci_dev *dev)
 {
 	u8 line = 0;
@@ -879,26 +899,6 @@ static void __init lguest_init_IRQ(void)
 }
 
 /*
- * Interrupt descriptors are allocated as-needed, but low-numbered ones are
- * reserved by the generic x86 code.  So we ignore irq_alloc_desc_at if it
- * tells us the irq is already used: other errors (ie. ENOMEM) we take
- * seriously.
- */
-int lguest_setup_irq(unsigned int irq)
-{
-	int err;
-
-	/* Returns -ve error or vector number. */
-	err = irq_alloc_desc_at(irq, 0);
-	if (err < 0 && err != -EEXIST)
-		return err;
-
-	irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
-				      handle_level_irq, "level");
-	return 0;
-}
-
-/*
  * Time.
  *
  * It would be far better for everyone if the Guest had its own clock, but
@@ -1028,7 +1028,8 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 static void lguest_time_init(void)
 {
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
-	lguest_setup_irq(0);
+	if (lguest_setup_irq(0) != 0)
+		panic("Could not set up timer irq");
 	irq_set_handler(0, lguest_time_irq);
 
 	clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
-- 
2.1.4