[PATCH] irqchip/gic: restore global interrupts group settings in distributor

[Anson Huang <b20788@freescale.com>]

In GIC's distributor initializtion, all global interrupts
are set to group 1, however, after suspend/resume with
ARM/GIC power off/on, distributor does NOT restore
these global interrupts group setting, it will cause
system fail to resume.

This patch adds global interrupts group setting restore
for distributor.

Signed-off-by: Anson Huang <b20788@freescale.com>
---
 drivers/irqchip/irq-gic.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index a530d9a..c8fa6ee 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -532,6 +532,16 @@ static void gic_dist_restore(unsigned int gic_nr)
 		writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
 			dist_base + GIC_DIST_ENABLE_SET + i * 4);
 
+	writel_relaxed(GICD_ENABLE_GRP1, dist_base + GIC_DIST_CTRL);
+
+	/*
+	 * Optionally set all global interrupts to be group 1.
+	 */
+	if (readl_relaxed(dist_base + GIC_DIST_CTRL) & GICD_ENABLE_GRP1) {
+		for (i = 32; i < gic_irqs; i += 32)
+			writel_relaxed(0xffffffff, dist_base + GIC_DIST_IGROUP + i * 4 / 32);
+	}
+
 	writel_relaxed(GICD_ENABLE | GICD_ENABLE_GRP1, dist_base + GIC_DIST_CTRL);
 }
 
-- 
1.9.1