From: Feng Tang <feng.tang@intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
John Stultz <john.stultz@linaro.org>,
Andrew Morton <akpm@linux-foundation.org>,
Michal Nazarewicz <mina86@mina86.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>,
linux-kernel@vger.kernel.org
Cc: Feng Tang <feng.tang@intel.com>
Subject: [PATCH] staging: ion: Add a default struct device for cma heap
Date: Thu, 6 Aug 2015 18:24:58 +0800 [thread overview]
Message-ID: <1438856698-21381-1-git-send-email-feng.tang@intel.com> (raw)
When trying to use several cma heaps on our platforms,
we met a memory issue due to that the several cma_heaps
are sharing the same "struct device *".
As in current code base, the normal cma heap creating
process is, one platform device is created during boot,
and it will sequentially create cma heaps (usually passing
its own struct device * as a parameter)
For the multiple cma heaps case, there will be one "struct
cma" created for each cma heap, and this "struct cma *" is
saved in dev->cma_area. So the single platform device can't
meet the requirement here.
So this patch add one default device for a cma heap to avoid
sharing the same "struct device", thus fix the issue. And it
doesn't break existing code by only using that default device
when no "struct device *" is passed in.
Also, since the cma framework has been cleaned up, this patch
also add a platform data member to pass the "struct cma*" to
ion_cma_heap_create().
Signed-off-by: Feng Tang <feng.tang@intel.com>
---
drivers/staging/android/ion/ion.h | 4 ++++
drivers/staging/android/ion/ion_cma_heap.c | 20 +++++++++++++++++---
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/android/ion/ion.h b/drivers/staging/android/ion/ion.h
index 443db84..e9af17e 100644
--- a/drivers/staging/android/ion/ion.h
+++ b/drivers/staging/android/ion/ion.h
@@ -45,6 +45,9 @@ struct ion_buffer;
* @size: size of the heap in bytes if applicable
* @align: required alignment in physical memory if applicable
* @priv: private info passed from the board file
+ * @priv2: when creating CMA heap, platform device should better also
+ * pass the "struct cma *" info, so that the cma buffer request
+ * know where to go for the buffer
*
* Provided by the board file.
*/
@@ -56,6 +59,7 @@ struct ion_platform_heap {
size_t size;
ion_phys_addr_t align;
void *priv;
+ void *priv2;
};
/**
diff --git a/drivers/staging/android/ion/ion_cma_heap.c b/drivers/staging/android/ion/ion_cma_heap.c
index f4211f1..b3e8896 100644
--- a/drivers/staging/android/ion/ion_cma_heap.c
+++ b/drivers/staging/android/ion/ion_cma_heap.c
@@ -29,6 +29,7 @@
struct ion_cma_heap {
struct ion_heap heap;
struct device *dev;
+ struct device default_dma_dev;
};
#define to_cma_heap(x) container_of(x, struct ion_cma_heap, heap)
@@ -180,9 +181,22 @@ struct ion_heap *ion_cma_heap_create(struct ion_platform_heap *data)
return ERR_PTR(-ENOMEM);
cma_heap->heap.ops = &ion_cma_ops;
- /* get device from private heaps data, later it will be
- * used to make the link with reserved CMA memory */
- cma_heap->dev = data->priv;
+
+ /*
+ * data->priv for cma heap is currently supposed to point
+ * to a "struct device *"
+ */
+ if (data->priv) {
+ cma_heap->dev = data->priv;
+ } else {
+ cma_heap->dev = &cma_heap->default_dma_dev;
+ cma_heap->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+ cma_heap->dev->dma_mask = &dev->coherent_dma_mask;
+ }
+
+ /* data->priv2 contains a pointer to struct cma */
+ dev_set_cma_area(cma_heap->dev, data->priv2);
+
cma_heap->heap.type = ION_HEAP_TYPE_DMA;
return &cma_heap->heap;
}
--
1.7.9.5
next reply other threads:[~2015-08-06 10:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-06 10:24 Feng Tang [this message]
2015-08-06 11:40 ` Michal Nazarewicz
2015-08-06 15:25 ` Feng Tang
2015-08-06 16:57 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438856698-21381-1-git-send-email-feng.tang@intel.com \
--to=feng.tang@intel.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@linuxfoundation.org \
--cc=iamjoonsoo.kim@lge.com \
--cc=john.stultz@linaro.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mina86@mina86.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®