From: Ludovic Desroches <ludovic.desroches@atmel.com>
To: <linux-gpio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Cc: <s.hauer@pengutronix.de>, <linus.walleij@linaro.org>,
<nicolas.ferre@atmel.com>, <alexandre.belloni@free-electrons.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>
Subject: [PATCH 2/5] pinctrl: dt-binding: Add DT binding documentation for Atmel PIO4
Date: Tue, 11 Aug 2015 10:28:02 +0200 [thread overview]
Message-ID: <1439281685-3020-3-git-send-email-ludovic.desroches@atmel.com> (raw)
In-Reply-To: <1439281685-3020-1-git-send-email-ludovic.desroches@atmel.com>
Add documentation for the Atmel PIO4 controller introduced with SAMA5D2
chip family.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
.../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 90 ++++++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
new file mode 100644
index 0000000..61ac757
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -0,0 +1,90 @@
+* Atmel PIO4 Controller
+
+The Atmel PIO4 controller is used to select the function of a pin and to
+configure it.
+
+Required properties:
+- compatible: "atmel,sama5d2-pinctrl".
+- reg: base address and length of the PIO controller.
+- interrupts: interrupt outputs from the controller, one for each bank.
+- interrupt-controller: mark the device node as an interrupt controller.
+- #interrupt-cells: should be two.
+- gpio-controller: mark the device node as a gpio controller.
+- #gpio-cells: should be two.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+Each node (or subnode) will list the pins it needs and how to configured these
+pins.
+
+ node {
+ pinmux = <PIN_NUMBER_PINMUX>;
+ GENERIC_PINCONFIG;
+ };
+
+Required properties:
+- pinmux: integer array. Each integer represents a pin number plus mux and
+ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
+right representation of the pin.
+
+Optional properties:
+- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
+bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
+input-debounce, output-low, output-high.
+
+Example:
+
+#include <sama5d2-pinfunc.h>
+
+...
+{
+ pioA: pinctrl@fc038000 {
+ compatible = "atmel,sama5d2-pinctrl";
+ reg = <0xfc038000 0x600>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+ <68 IRQ_TYPE_LEVEL_HIGH 7>,
+ <69 IRQ_TYPE_LEVEL_HIGH 7>,
+ <70 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&pioA_clk>;
+
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PB0>,
+ <PIN_PB5>;
+ bias-pull-up;
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+ ...
+ };
+};
+...
--
2.5.0
next prev parent reply other threads:[~2015-08-11 8:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-11 8:28 [PATCH 0/5] New Atmel PIO4 pinctrl/gpio driver Ludovic Desroches
2015-08-11 8:28 ` [PATCH 1/5] pinctrl: introduce driver for Atmel PIO4 controller Ludovic Desroches
2015-08-11 8:28 ` Ludovic Desroches [this message]
2015-09-15 8:52 ` [PATCH 2/5] pinctrl: dt-binding: Add DT binding documentation for Atmel PIO4 Sascha Hauer
2015-08-11 8:28 ` [PATCH 3/5] MAINTAINERS: Add an entry for pinctrl-at91-pio4 Ludovic Desroches
2015-08-11 8:28 ` [PATCH 4/5] ARM: at91/dt: sama5d2: add pio controller node Ludovic Desroches
2015-08-11 8:28 ` [PATCH 5/5] ARM: at91/defconfig: sama5: add PIO4 controller support Ludovic Desroches
2015-09-07 13:12 ` [PATCH 0/5] New Atmel PIO4 pinctrl/gpio driver Ludovic Desroches
2015-09-15 8:57 ` Sascha Hauer
2015-09-15 9:15 ` Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439281685-3020-3-git-send-email-ludovic.desroches@atmel.com \
--to=ludovic.desroches@atmel.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®